8494 REPAIR/ MAINTENANCE TO CERTAIN B/R AND E/M WORKS AT ARC RAMESWARAM UNDER GE TIRUNELVELI

Amount

Material and labour for Preparing old plastered surface or unplastered surface on wall for applying one coat of oil bound distemper complete all as specified and directed. Note:- The cracks in the existing wall shall be filled with crack filler material before applying distemper. The rate quoted by the tenderer is deemed to be inclusive of same.

Material and labour for Preparing old plastered surface or unplastered surface on ceiling for applying one coats of oil bound distemper complete all as specified and directed.

Material and labour preparation of old plastered or unplastered surfaces on walls and applying one coats of white wash on walls complete all as specified and directed.

Material and labour for preparation on old plastered / previously untreated surfaces on ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over old surfaces complete all as specified and directed. Note:- The cracks in the existing wall shall be filled with crack filler material before applying weather coat. The rate quoted by the tenderer is deemed to be inclusive of same.

Material and labour preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint , complete all as specified and directed.

Material and labour preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips, valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

Supply and fixing 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed.

Supply and fixing Solar control film 25 micron reflective type for sticking to glass panes as per instructions of manufacturers , all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6 or fixed with adhesive make :"Sika "complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing plaster in cement mortar 1:4 or fixed with adhesive make :"Sika" complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item ser No 17 here-in before but on vertical surfaces such skirting/ dados etc including 10mm thick rendering in CM (1:4) complete all as specified and directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM 1:4 as backing coat complete all as specified and directed.

Taking down Chowkhats or frame not exc 1.50 Sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Supply and fixing of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing given in clause 8.B.2 of SSR -2010 (Part-II Rates) complete all as specified and directed.

Supply and fixing 100mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

Supply and fixing 150mm long aluminium bow handle D type cast type anodised complete all as specified and directed.

Supply and fixing 100 mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Supply and fixing in repair 150mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

Supply and fixing in repair 150mm long aluminium handle D type cast type anodised complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening complete all as specified and directed.

Supply and fixing in repair 100 mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

Supply and fixing in repair 75 mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

Supply and fixing in repair Stainless steel knob lock with quality SS 304 material having inside and outside left/right hand opening with latch bolt and keys complete all as specified and directed.

Supply and fixing in repairs Floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) incl Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device with recessed bottom including PVC 'S' trap 110 mm bore etc complete all as specified.

Supply and fixing in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

Supply and fixing in repairs vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed

Supply and fixing in repair of PVC low level flushing cistern 10 Ltr capacity, valve less syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

Supply and fixing in repair pillar tap Fancy Type cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes complete all as specified and directed.

Supply and fixing 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed

Supply and fixing PVC connection pipe 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair aluminium anodised powder coated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.

Supply and fixing in repair Toilet paper holder with flat recessed type stainless steel or brass, chromium plated fixed to walls with chromium plated (CP) brass screws, completed all as specified .

Supply and fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed by Engr-in-Charge

Supply and fixing in repair Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply and fixing in repair 15 mm bore stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repairs, bib taps, 15mm, fancy type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixing in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position or in pipe etc. complete in all respect as specified.

Supply and fixing in repair Plastic water closet seat, black or White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 125mm size with or without swivel joints any size, including fixing to steel pipe or union, all as specified or directed by Engr - in - charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry over and including screed bed or bedding layer in Cement Mortar 1 : 6 of 15mm thick complete all as specified and directed by Engr - in- Charge.

Material and labour for Continuous brick edging; with width equal to the width of the brick; laid dry on end vertically using fly ash bricks complete all as specified and directed.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 50/75/100/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.

Supply and fixing of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing of 110mm bore PVC (SWR) Vent cowl complete all as specified and directed by Engr - In- Charge.

Supply and fixing of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Supply and fixing of 110 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.

Supply and fixing of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

Supply and fixing of 75mm bore PVC (SWR) bends complete all as specified and directed by Engr - In- Charge.

Supply and fixing of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.

Supply and fixing in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Material and labour for cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub -floor, sub base, floors, 25mm thick complete all as specified and directed

Supply and fixing in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I complete all as specified and directed

Supply and fixing or laying of CPVC pipes outer dia 16mm with SDR 13.5 pipes & plain CPVC SDR 11 fitting fittings on walls/ceiling or in floors including taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified.

Supply and fixing in repair CPVC Brass fittings Brass Elbow (Special Item) for outer dia 16mm( SDR 13.5 pipes & Special fitting) on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fixing in repair CPVC Brass fittings Brass Tee (Special Item) for outer dia 16mm( SDR 13.5 pipes & Special fitting) on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fixing in repair CPVC Brass fittings Male Brass Threaded Adaptor (MTA/ MBTA) (Special Item) for outer dia 16mm( SDR 13.5 pipes & Special fitting) on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fixing in repair CPVC Brass fittings Female Brass Threaded Adaptor (FTA/ FBTA) (Special Item) for outer dia 16mm( SDR 13.5 pipes & Special fitting) on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes of size 20mm outer diameter of SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors including taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified

Supply and fixing of CPVC 20mm outer diameter brass elbow fitting complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter brass Tee fitting complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter Male Brass Threaded Adaptor (MTA/ MBTA) ) complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter Tank Adaptor complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter Union complete all as specified and directed

Supply and fixing of CPVC 20mm outer diameter Ball valve complete all as specified and directed

Supply and fixing in repair for ball valves, bore 15mm dia of pipe, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed

Supply and fixing in repair for ball valves, bore 20mm dia of pipe, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed

Supply and fixing in repair for bottle trap (32mm dia of discharge pipe) of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed

Supply and fixing in repairs Door closer hydraulically regulated, designation No. 3 aluminium (extruded section body), universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc.complete all as specified and directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

(a) One light/fan point controlled by one, one-way switch

(b) One bell/buzzer point controlled by one push button.

(d) All as per item No. 90 described here - in - before but for 3/6 pin 5 Amps socket on same board with 1.5 Sqmm copper cable and provision of 1.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

(e). All as per item No.90 described here - in - before but for 3/6 pin 15 Amps socket on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular switch 1 way 16 amps one module complete all as specified and as directed.

Supply and Fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fixing modular socket 6A/16A ,2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix Modular Bell push, flush type, 6 amps 240 Volts AC Single pole flush type and connecting up complete all as specified and as directed.

Supply and fix Call bell multi music type electric suitable for working on 230 volts AC supply complete all as specified and as directed.

Supply and fix stepped type modular electronic fan regulator for fixing on modular base complete all as specified and as directed.

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and as directed.

Supply and fix in repair MCB 63 Amps, 4 pole, 415 Volts, 50Hz 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair MCB SP 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Material and labour for Sub main wiring with two runs of single core 4.0 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLS cable, with one run of 4.0 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLS cable as earth continuity conductor and one run of suitable size non metallic rigid PVC conduit and conduit accessories fixed on concealed on wall/roof including cutting chases etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fixing sheet metal enclosure Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and taking down old U/S fittings for taking into credit complete all as specified and directed

Supply and fixing in repairs LED light fitting 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. .

Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). (Note: Old ceiling fan submitted to MES Store)

Supply and fix capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed.

All as per item No.113 but for exhaust fan 300 mm including replacing of rusted nut and bolts complete all as specified and directed.

Supply and fix ball bearing suitable for any sweep ceiling fan complete all as specified and directed.

Material and labour for rewinding with super enameled copper wire including varnishing, drying and connection complete all as specified and directed.

Supply and lay LT under ground cable 1100 volts grade Cross linked Polyethylene (XLPE) insulated PVC Sheathed Cables: armoured multistranded heavy duty electric cable with aluminium conductor laid in trenches/ duct / walls including cable gland and lugs on both end termination including laying, connecting to various switches in panel board, testing and commissioning etc including taking out existing unserviceable cables of following sizes complete all as directed & as specified. Note: Earthwork,excavtaion, cable cushioning and brick protection shall be measured and paid for separately.

a) 3.5 Core 70 Sqmm

b) 4 Core 16 Sqmm

Excavation in trenches not exc. 1.5 m wide and not exc.1.5 m deep for laying of cable, pipe and for erecting of steel tubular swaged pole etc, and getting out in hard/dense soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material not exc 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting points in soil all as directed by Engineer-in-Charge.

Supply, spreading and compacting of approved riddled earth in cable ducts / trenches for cable cushion on both top and bottom of cable, including ramming all as specified and directed by Engineer-in-Charge. (Note :- Punned thickness only will be measured)

Supply and lay burnt bricks for cable protection of sub class 'B' standard size in trenches all as specified.

Supply and fixing in replacement LED street light fitting 70 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix in replacement PVC insulated two single core 1.5 sqmm FRLS copper conductor and one run of 1.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 20mm dia heavy duty non metallic rigid PVC conduit and accessories complete all as specified and as directed. Note : (i)Two run 1.5 Sqmm of single core, one run of 1.5 sqmm earth conductor and PVC conduit will be measured as one RM.

Supply and fixing in replacement pole mounting type FRP cable looping box, IP66 , with connector of size 205 x 255 x112 mm with 40 x 6mm flat iron including suitable brass gland, lugs etc and terminal box to be fixed on pole with suitable fixing arrangement all as specified and as directed.

Material and labour in replacement of GI bracket made out of 32 mm dia GI pipe length 1.50m, bent to an angle of 30 degree and fixed with 40mm x 6mm flat iron, including suitable 02 set of clamps with nut , bolts ,and washers for fixing of light to pole complete all as specified and as directed.

Supply and fixing in replacement LED post top lantern 20 watts or nearest higher wattage , with IP 65 protection with accessories and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block complete all as specified and directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 15 AMP, in the MCB DB complete all as specified and directed.

Supply and laying of 40 mm steel tubing galvanised light grade complete all as specified and directed by Engr-in-Charge.

Material and labour for 'B' Check & Maintenance of 35 KVA DG Set as per the recommendation of manufacturer including replacement of necessary recommended Lub oil and fuel oil filters. 'O' rings, necessary gaskets, clamp nuts, ball washers, adjustment of speed governor, cleaning of air cleaner, servicing of turbo charger, servicing to control wiring etc complete all as directed and specified by Engineer-in-Charge. Note:- (a) The rate quoted deemed to include all materials required for 'B" checking by authorized dealer such as replacement of (i) Element, Lub Oil Filter (ii) Fuel Filter and ring kit (iv) Seal, O Ring (v) Premium blue 10 Liter (vi) Separator, fuel & water (vii) CRN Resistor element (viii) Foil Sealed test Strips (b) Required T&P shall be arranged by the contractor at site.

Material and labour for 'B' Check & Maintenance of 100 KVA DG Set as per the recommendation of manufacturer including replacement of necessary recommended Lub oil and fuel oil filters. 'O' rings, necessary gaskets, clamp nuts, ball washers, adjustment of speed governor, cleaning of air cleaner, servicing of turbo charger, servicing to control wiring etc complete all as directed and specified by Engineer-in-Charge. Note:- (a) The rate quoted deemed to include all materials required for 'B" checking by authorized dealer such as replacement of (i) Element, Lub Oil Filter (ii) Fuel Filter and ring kit (iv) Seal, O Ring (v) Premium blue 10 Litre (vi) Separator, fuel & water (vii) CRN Resistor element (viii) Foil Sealed test Strips (b) Required T&P shall be arranged by the contractor at site.

Supply and fix AVR (TVAR-10/TAVR-20/TVAR-14) for 35 KVA DG Set

Supply only fuel supply pipe of 35 KVA DG Set

Supply only head gas kit of 35 KVA DG Set

Fuel Pump calibration and repair of 35 KVA DG Set

Supply and fix conversion (display) Kit of 35 KVA DG Set complete all as specified and directed.

Radiator service/ repair and hose clamp set of 35 KVA DG Set

Supply only Engine oil SAE 15W40 high quality suitable for Kirloskar make DG set

Supply only Coolant oil heavy duty suitable for Kirloskar DG set.

Supply only Distilled water suitable for DG Set.

Providing comprehensive annual maintenance periodical/preventive maintenance including annual maintenance of cooling appliances ( Split type Air Conditioners) as per manufacturer specification by providing one AC/Refrigeration mechanic including replacement of components as listed in subsequent items here in after. The maintenance of cooling appliances includes the following:- (a) Cleaning of coil unit with dust blower, lubricate the indoor and outdoor fan motor with oil. (b) Cleaning of air filters, indoor unit grills and filters through air blower. (c) Checking and cleaning the drain connection and air filter periodically, washing of coil with ventiklean solution once in a contract period. (d) Check and replace the refrigerant pipe once in a contract period or as and when required. (e) Check and repair the minor electrical fault in incoming supply. (f) Check and replace the water PVC pipe. (g) Replacement of faulty spares/components (h) Carry out the monthly, quarterly and annual maintenance of all cooling appliances of any make & capacity with job card and making the Cooling Appliances functional (Each Job contains 3 Complaints)

Supply only the following new items for 1.5 / 2.00 Ton Capacity Split type AC including testing and commissioning etc complete all as directed.

Capacitor 36/45/50 MFD.

Air filters.

Outdoor fan motor

Indoor fan motor

Indoor blower

Copper condenser coil unit (for A/C)

Copper cooling coil unit (for A/C)

Indoor motor capacitor 2.5 MFD. Make:

Outdoor fan motor capacitor 3 to 6 MFD

Non return valve (For gas top up charging)

Remote control suitable for inverter model Split AC.

Electronic components for repairs to PCB

PCB board suitable for indoor unit of Inverter model split AC 1.5/2.0 TR .

PCB board suitable for outdoor unit of Inverter model split AC 1.5/2.0 TR .

Copper pipe of size 1/2" for suction line with foam insulation

Copper pipe of size 1/4" for discharge line with foam insulation

Swing Motor for indoor unit

Outdoor unit stand

Supply and fixing compressor including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (M-22/F-22) providing NRV for further topping up of gas and re-fixing in the position including complete testing and commissioning all as directed for the following appliances :-

Split type AC 1.5 Ton capacity.

Supply only R22 /R32 /R410 Gas complete all as specified and directed.

Servicing/ overhauling of centrifugal pump set by dismantling completely and replacing unserviceable ball bearing, shaft sleeve, gland neck ring gland rope, nut and bolts, impellers etc, assembling back the complete pump and fixing alignment to the original position and coupling with pump and necessary alignment etc with Two coat enameled paint including scraping complete and written MES/SM testing and commissioning complete all as specified and directed.

Providing comprehensive annual periodical/ preventive maintenance/ Health check of Water Purifier of capacity 25-30 Ltr as per manufacturer specification at Rameshwaram all as specified and directed and including replacement of minor component as listed in subsequent items here in after. The maintenance of Water Purifier includes the followings:- (i) Replacing of all filters units. (ii) Checking and cleaning the drain connection (iii) Check & repair the minor electrical fault in incoming supply. (iv) Checking the serviceability of water purifier.

Material and labour for servicing of 5-10 KVA UPS system, checking battery terminal for tight or replacement, connection cable including other connected items to functional or panel board, lamp indicators, meters lubricating battery terminal, replacement of defective fuses, wiring and resembling and testing and serviceability check complete all as per the direction of Engineer in charge and manufactures instructions

Supply and fixing sealed maintenance free lead acid battery 12 V, 32 AH including connected wire and clamps for 5-10 KVA UPS system complete all as specified and directed by Engr-in-Charges : (Make : Exide/AMARON/AMARA)

Supply , erection, testing of maintenance free chemical earthing by auguring & installation of copper bonded rod using machine bore and filling with backfill compound using copper bonded rod of dia 20 mm , length 3m , made of low carbon high tensile steel with copper plated (250+ microns) for preventing external corrosion, with top end connected with copper plated welded bus bar terminal of dimension 150mm x 50mm x 6 mm , complete conforms to IS : 3043 - 1987 and carbon based, high conductive backfill compound 'Conductolite' with resistivity < 0.5 ohm-metre (In dry conditions) & resistivity is non-moisture dependant,pH Value : 8.0 - 9.0, electronic & ionic conduction, less susceptible to shrinkage, with hygroscopic & corrosion resistive properties and covering with heavy duty polyplastic earth pit chamber cover . Make : M/s Ashlok Safe Earthing Electrode Limited.

R V CONSTRUCTION (BID ID -3468147)