NOTICE NO 31 LOT NO 12

Site clearence etc.

Earthwork in excavation of foundation in ordinary soil (loam, clay & sand) including liftupto 1.50 m and lead upto 30 cm including filling, watering and raming of excavated earth into the trenches or in the plinth and removal and disposal of surplus earth as directed by the Eng. including upto a distance of 30 mtr from foundation as per (S.l.No.251)

Concrete with 40mm gauge brick ballast, fine sand of 1.25 F.M and cement in the proportion of 8:4:1 in foundation and under floors including supply of all material labours tools and plants etc required for the proper completion of the work (S.l.No275)

Class 150 sub class 'A' brick work in 1:4 cement coarse sand mortor in foundation & up to plinth including supply of all materials and tools and plants etc. required for proper completion of the work . As per (S.l.No305b)

Providing and Laying of factory made 80 mm thick rubber moulded interlocking cement concrete tilles (30 mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by Engineer-in-charge.

12 mm. thick Plaster with Cement and approved coarse sand morter 1:3 on top of roof (Minimum thickness not less than 100 mm) including neat cement finish and supply of all matarial, labour T&P etc. required for proper completion of work. As per (S.l.No 584)

Struck pointing with cement morter consisting one part of cement and two part of fine sand of 1.25 fineness modulous on brick work including raking of joints washing and cleaning and supply of all materials, labours T&P etc. including all completion of work. As per (S.l.No574)

R.C.C work with cement approved coarse sand 20mm gauge approved stone ballast in the proportion of 1:1.5:3 in bed blocks excluding the supply of rainforcement & its bending but including its biding the same with 24 BWG, Gl binding wire and alsoincluding providing & fixing the necessary centering and shuttering and its removal after completion of work & supply of all other materials labour tools and plants required for the proper completion of work (Labour rate includes cost of centering and shuttering) .

Mild steel of iron work in plain work such as in reinforced concreate or reinforced brick work (When not included in overall rate) wrought to required shapes as necessary and bending for the proper completion of work including supply of steel and its wastages and all labour and T&P required for proper completion of work note the steel shall bent cold and all bends hooks and authorised over lapping shall be measured