PROVN OF ELEVATED SANTRY POST WITH GAURD ROOM TOILET BLOCK BATHROOMS COVERED PASSAGEADDITION ALTERATION TO BLDG NO

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil. Complete all as specified and directed by Engr-in-Charge.

Rough Excavation n. exc 1.5m deep and getting out in hard/ dense soil. Complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m depth for cesspit, manhole, cable/pipe, foundation, etc, and getting out in any type of soil. Complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exc 1.5 m wide and exc 1.5m but not exc 3.0 m depth for cesspit, manhole, cable/pipe, foundation, etc, and getting out in any type of soil.Complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with any type of soil. Complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point as in soil. Complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc 250 m but not exc 500 m and depositing where directed. Complete all as specified and directed by Engr-in-Charge.

Removing excavated soils exceeding 500 M but not exceeding 1.5 KM and depositing where directed. Complete all as specified and directed by Engr-in-Charge.

M&L for broken stone or boulder hard core of gauge not exc 63mm, deposited spread and levelled n.exc 15 cm thick, watered and rammed to a true surface. Complete all as specified and directed by Engr-in-Charge.

M&L for broken stone or boulder hard core of gauge exc 63mm but not exc 100mm, deposited spread and levelled n.exc 15 cm thick, watered and rammed to a true surface. Complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete. Complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (nominal mix) in cement concrete Type 1:1.5:3 using 20 mm graded aggregate as in foundation,incl raft,footing,foundation beam,plinth beam,base for columns and mass concrete. Complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (Nominal mix) in Cement concrete Type 1:1.5:3 using 20 mm graded aggregate as in beams, cantelivers, bressmers, lintel over 1.5m span. Complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (Nominal mix) in cement concrete Type 1:1.5:3 using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts. Complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (Nominal mix) in cement concrete Type 1:1.5:3 using 20 mm graded aggregate as in slabs supported in walls,beams and columns in floors,roof,landing ,deck slabs,and in shelves etc. Complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of concrete foundations, footing, bases of columns raft and raft beams, side of soffits ( if any) of foundation and plinth beams and similar work; vertiacal or to batter, flat fair finished surface of concrete. Complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides and soffit of floor or roof beams, beam haunching,girders etc. in flat rough finished surfaces of concrete. Complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions of square rectangular or poligonal rough finished surfaces of concrete. Complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone/ boulders masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. Complete all as specified and directed by Engr-in-Charge.

M&L for walling of random rouble, uncoursed, well bonded, bedded, and solidly hearted, built in cement mortar 1:4. Complete all as specified and directed by Engr-in-Charge.

All as per item No.20 above, but except stone.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6. Complete all as specified and directed by Engr-in-Charge.

Extra over RR stone walling for hammer dressing to face stones and bracing of face beds and joints,as specified of random rubble walling ,uncoarsed or brought upto coarses with maximum depressions on face from straight edge held against the dressed surface n exc 40mm on granite or trap stone.

Extra over stone walling for hammer dressing to face stones and bracing of face beds and joints,as specified of random rubble walling ,uncoarsed or brought upto coarses with maximum depressions on face from straight edge held against the dressed surface n exc 20mm on granite or trap stone.

M&L for damp proof course (DPC) to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate. Complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. Complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4. Complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (Nominal Mix) B-0 type,1:2:4 (12.5mm Crushed stone aggregate) in beams, cantilevers,bressummers, lintels etc. Complete all as specified and directed by Engr-in-Charge.

M&L for 12 mm thick perforated particle board/ tiles for isulation and accousitc purpose, 60x60 cm in size , fixed with nails to timber frame work or with staple on snap gird decorate the surface with white paint. Complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium snap grid (size of grid 605mm X 605mm) frame work for flash ceiling including hanging/suspended at 120 cm c/c with 2 mm dia GI wire ,J bolts,washers,nuts arrangements complete all as specified in clause 10.38.1 of MES Schedule Part-I. Complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame without taking off shutter exc 1.50 sqm but n.exc. 4.00 sqm each and refixing in other opening. Complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description n exc 1 Sqm each. Complete all as specified and directed by Engr-in-Charge.

Demolition of Cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level.

Taking down cement or cement lime plaster on brick or stone walls etc, including raking out joints, hacking for key & scrubbing down with water.

Dismantling plain or corrugated steel sheeting any gauge thicknaess, including nanital or similar pattern roof covering. Complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, walls etc with grage of zinc coating 275. Complete all as specified and directed by Engr-in-Charge.

S&F 0.80 mm thick plain, galvanised, mild steel, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces.

M&L for preparation of old treated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of varnish. Complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. Complete all as specified and directed by Engr-in-Charge.

S&F 600X600X12mm thick mineral fiber acoustical ceiling boards, fixed with staples to anodised aluminium snap grid (size of grid 605mm X 605mm) frame work for false ceiling and suspended with roof consisting of vertical hangers made of GI wire of dia 2.68mm of 1.83 length and decorate the surface with OBD. Complete all as specified and directed by Engr-in-Charge.

S&F in repair for 8 mm thick prelaminated wooden flooring including and laid over existing concrete surface by the manufacturer as approved by the GE in writing in a manner and providing the items as specified below :-(a) 125 micron polythene sheet (as vapour barrier) laid over existing concrete surface including taking all necessary steps to make the levelness and smoothness of existing concrete surface and achieve moisture free conditions (b) 5 mm thick thermocole sheet over polythene sheet (c) 8 mm thick prelaminated wooden flooring Make:-Premier Vinyl flooring/Armstrong/Krishna Vinyle Ltd New Delhi.

M&L for preparing surfaces, plastered or unplastered new surfaces on wall and applying two coat of oil bound distember over a coat of alkali resistant priming paint.

M&L for 10 mm thick rendering on fair faces of brick work or conceret surface in CM 1 :4 finished even and smooth without using extra cement.

M&L for 15mm thick rendering on fair faces of brick work or conceret surface in CM 1 :4 finished even and smooth without using extra cement.

M&L 15mm thick rendering on fair faces of brick work or conceret surface in CM 1 :6 finished even and smooth without using extra cement.

M & L for 15 mm thick rendering on stone masonary or other than fair faces of brick work in cement mortar 1:6.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint . Complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats distember oil emulsion white or tinted.

Dismantling of boarding any description fixed in any position with nails .Complete all as specified and directed by Engr-in-Charge.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched. Complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame for doors,windows, ventilators with one or more rebates includind joining cleats for fixing etc. Complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodized door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 02 nos in each door,hinges, aluminium anodised snap beading screws etc Complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodized window and ventilator shutters, fixed type, without sash bars,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium anodised snap beading screws etc.

S&F Aluminium anodized window and ventilator shutters, side hung type, without sash ,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 02 nos in each window,hinges, aluminium anodised snap beading screws etc Complete all as specified and directed by Engr-in-Charge.

S&F 2nd class soft wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints. Complete all as specified and directed by Engr-in-Charge.

S&F 2nd class softwood 35 mm thick plain ,framed,pannelled shutters(any number of pannel), with panels of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, Complete all as specified and directed by Engr-in-Charge.

S & F aluminium sheeting 0.56 mm thick in hips ,valley ,drip and straight flashing (Length and girth as fixed). Complete all as specified and directed by Engr-in-Charge.

S/F 35mm thick 2nd class soft wood glazed & skeleton shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.24(a) Complete all as specified and directed by Engr-in-Charge.

S/F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.24(b) Complete all as specified and directed by Engr-in-Charge.

S & F Galvanised mild steel wire cloth 0.56 mm dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples.

S&F vitreous china sqatting pan 'Orrisa' pattern 580x440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) Complete all as specified and directed by Engr-in-Charge.

S&F PVC valveless,10 liters syphonic action flushing cistern, low level, white, with inlet, ball valve, float and including brakets and connection to pipes

M&L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring.

M&L for 75 mm Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base floor. Complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick Cement concrete type C 1, 1:3:6 (using 20 mm graded granite stone aggregate) in plinth protection.

M & L for PCC 1:2:4 type B - I using 20 mm graded stone aggregate as in coping.Complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC(SWR)soil, waste and vent pipes single socketed.Complete all as specified and directed by Engr-in-Charge.

M&L for Pre Cast cement concrete B-1 1:2:4(using 20 mm graded aggregate) in bond stones for RR walling and similar articles with plain faces.

M&L for screed bed or bedding layer of cement mortar 1:4 , 15 mm thick for laying floor finishes .Complete all as specified and directed by Engr-in-Charge.

S&F vitrified Tiles Dark Shade 10 mm thick(square/ rectangular) polished,area of each tile n. exc. 0.36 sqm in floors etc,set & jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes .

S&F coloured non skid ceramic tiles 300x300x7mm thick , in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 for backing of Dado/ Skirting. Complete all as specified and directed by Engr-in-Charge.

S&F glazed ceramic tiles 450x350x7mm thick , in dado / skerting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe Complete all as specified and directed by Engr-in-Charge. Make Hindwere/ Parry ware.

S&F vitreous China Wash hand Basin Pedestal type white, flat back size 630x 450 mm including cutting for and pinning ends of bracket, with flush pipe of low or high density of PVC, 32mm dia, waste coupling, waste pipe Complete all as specified and directed by Engr-in-Charge. Make Hindwere/ Parry ware.

S&F 600x 450 mm bevelled edge mirror of slected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chormium plate brass screws and cup washers.

S&F padestal pan ,trap , seat and cover including connection to drain pipe and to flushing pipe, antisyphonage pipe etc complete.

S & F Vitreous china urinal, half stall type flat back of size white, with grating and union and discharge pipe. Complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F 110 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 75 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 110mm bore PVC (SWR) bends any radius with providing acceess door. Complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius with providing acceess door. Complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) reducers 110mm bore. Complete all as specified and directed by Engr-in-Charge.

S& F (SWR) floor trap, 75mm diameter of outlet with grating including jointing with solvent cement. Complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long MS barrel tower bolts stove enameled black with bright bolt. Complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long MS barrel tower bolts stove enameled black with bright bolt. Complete all as specified and directed by Engr-in-Charge.

S&F 200mm long MS sliding door bolt with haps, staple (bolt type)and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges. Complete all as specified and directed by Engr-in-Charge.

S&F 75 mm long medium weight, cold rolled mild steel Butt hinges.Complete all as specified and directed by Engr-in-Charge.

S&F 100mm long MS pressed handle ovel type, stove enamelled. Complete all as specified and directed by Engr-in-Charge.

S&F 150mm long MS pressed handle ovel type, stove enamelled. Complete all as specified and directed by Engr-in-Charge.

S & F Aluminium anodised barrel tower bolts of extruded section of size 150mm. Complete all as specified and directed by Engr-in-Charge.

S & F Aluminium anodised barrel tower bolts of extruded section of size 100mm. Complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. plate 300mm long. Complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate 200mm long. Complete all as specified and directed by Engr-in-Charge.

S & F Aluminium anodised handle of extruded section of size 150mm .Complete all as specified and directed by Engr-in-Charge.

S & F Aluminium anodised handles of extruded section of size 100mm .Complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass any thickness size quality or description from wooden/steel frames glazed with putty or fixed with beads etc.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.5 sqm in each pane.

S & F sheet glass 4.0 mm thick ordinary quality & glazing with oil putty/ wooden beads in squares n. exc 0.5 sqm in each pane.

S & F sheet glass 5.50 mm thick ordinary quality & glazing with oil putty in squares n. exc 0.5 sqm in each pane.Complete all as specified and directed by Engr-in-Charge.

S&F mild steel TMT bars 10 mm dia and over, quality cut to length , bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than0.9 mm dia.

All as per item no. 104 above but 8mm mm dia .

All as per item no. 104 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with grade of zinc coating 275, with two corrugation side lap, fixed with L or J type or cranked hook bolts and washers, in roofs, walls etc.Complete all as specified and directed by Engr-in-Charge.

S&F 0.80 mm thick galvanized, plain mild steel sheeting with grade of zinc coating 275, with two corrugation side lap, fixed with L or J type or cranked hook bolts and washers, in roofs, walls etc.

M&L prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.

M&L for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.

S&F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E- 250) quality- A.

M&L for preparation of new wooden surfaces , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat pink primer.

M&L for prerparation of new or previously untreated steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxied zinc chrome primer.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash .

S&F towel rail 600mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms).

S&F 110mm bore dia PVC (SWR) branch pieces (double Y) equal or unequal.Complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 'S' trap 110/110mm dia.Complete all as specified and directed by Engr-in-Charge.

M&L for rotational moulded polyethylene water storage tanks triple layers (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity all as specified in SSR Part I. Complete all as specified and directed by Engr-in-Charge.

M&L for rotational moulded polyethylene water storage tanks triple layers (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity all as specified in SSR Part I. Complete all as specified and directed by Engr-in-Charge.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe. Complete all as specified and directed by Engr-in-Charge.

S&F tube sizes 15mm bore of pipe, medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors.Complete all as specified and directed by Engr-in-Charge.

S&F tube sizes 20mm bore of pipe, medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors. Complete all as specified and directed by Engr-in-Charge.

S&F tube sizes 25mm bore of pipe, medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors/ trenches. Complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing GI pipe line of 25 mm dia and inserting new pipe line incld all fittings. Complete all as specified and directed by Engr-in-Charge.

S&F stop/gate valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes 20mm bore.

S&F CP bib tap fancy type with crutch or butterfly handle chromium plated fancy type screwed down screwed for iron pipe or brass ferrule of size 15mm bore.

S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm. Complete all as specified and directed by Engr-in-Charge.

S&F 15mm dia angle stope valve of PTMT any colour high pressure screwed for for iron pipe and fixed. Complete all as specified and directed by Engr-in-Charge.

S & F swivel shower of PTMT any colour for fixing with 15mm pipe.(min wt 40gms). Complete all as specified and directed by Engr-in-Charge.

S&F 32mm waste coupling of PTMT .Complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil. Complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete type C-2 (1:3:6), 40mm graded aggregate in foundation filling and mass concrete.Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide.

S&F 1.00mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holespunched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required.Complete all as specified and directed by Engr-in-Charge.

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank (Concealed type).

Dismantling of timber scantling 40 Sqcms and over in section in any position in unframed work.Complete all as specified and directed by Engr-in-Charge

M&L for second class soft wood wrought in scantling timber fixed. Complete all as specified and directed by Engr-in-Charge.

All as per item no.138 above but except timber.

M&L for 6mm thick veneered decorative plywood grade 1 (BWR Resin), with decorative face veneers on one face ,fixed with nails to timber frame work as in wall.Complete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick veneered decorative plywood grade 1 (BWR Resin), with decorative face veneers on one face ,fixed with nails to timber frame work as in ceiling.

M&L for 6mm thick ply wood grading BWR type BB with fixed with nails to timber frame work in wall. Complete all as specified and directed by Engr-in-Charge.

M & L for 6 mm thick Ply wood, grade BWR, type BB fixed with nails to timber frame work in partitions etc in ceiling.Complete all as specified and directed by Engr-in-Charge.

M&L for plain fillets, square/ rectangular or triangular in section clean sawn secured with nails or brads area exc 13 & n.exc 25 Sqm cm. Complete all as specified and directed by Engr-in-Charge.

M&L for plain fillets, square rectangular or triangular in section clean sawn secured with nails or brads area exc 3 & n.exc 6 Sqm cm.Complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring. Complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade in different colours, laid over and incld 50 mm thick sand cushioning and joints filled with fine sand. Complete all as specified and directed by Engr-in-Charge.

M & L for 150 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in flooring finishing even and smooth without using extra cement for flooring/ hard standing .

M & L for chequered cement concrete tiles 25 cm x 25 cm x 22 mm thick set and jointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:4. Complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel sections in Joist, channels, angle or Tee section including fixed indepently without connecting plates etc. FE 410W (Gde-E-250 quality-A). Complete all as specified and directed by Engr-in-Charge.

S&F rolled mild steel sections in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410W (Gde-E-250 quality-A)

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165

S&F fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with self tapping screws and washer in roof.rolled mild. Complete all as specified and directed by Engr-in-Charge.

M & L for forming contraction (dummy) joints 65 mm deepx10mm wide,filled with sealing compound of Grade 'A'. Complete all as specified and directed by Engr-in-Charge.

M&L for Construction of septic tank 10 users: Excavation in any type of soil Fdn in PCC 1:2:4 brick work in CM 1:4, RCC cover slab in (1:1.5:3) type A-1 (20mm graded crushed stone aggregate) slab including precast manhole cover having 6mm plate embedded all around with angle iron frame vent shaft and sludge chamber etc complete all as specified and as directed and all as shown on drg No CESZ/TD -01/2015 sheet 1/3 to3/3.

M&L for Construction of soakage well incl excavation in any type of soil,Foundation in PCC 1:3:6, wells of stone Honey combed solid masonry in CM 1:4, including intercepting chamber,screen chamber,RCC cover slab in (1:1.5:3) type A-1 (20mm graded crushed stone aggregate)/RR masonry/Filling with brick bats of size 1.80 mtr dia and 3.00 mtr deep complete all as shown on drawing No CESZ/TD -01/2015 sheet 1/3 to3/3.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in man hole cover slab.Complete all as specified and directed by Engr-in-Charge.

M&L for 150mm bore plain cement Concrete (1:4;8 ) type D2 using 40 mm graded stone aggregate bed to drain pipes including packing under, and haunching including against the side of pipes after they are laid and tested .Complete all as specified and directed by Engr-in-Charge.

M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified. Complete all as specified and directed by Engr-in-Charge.

E&M PORTION :- Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good disturbed surfaces of walls, floor etc to match with the existing surface.Complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly Complete all as specified and directed by Engr-in-Charge, for the following :- (a) One light/ceiling fan point controlled by one switch.

All as per item no.161 above but 3 pin switch socket outlet on same board.

All as per item no.161 above but one switch socket combination 5 Amps on independent board.

M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor. Complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade 20mm dia, wall thickness not less than 2.00 mm duly ISI marked with all accessories such as bends, reducers, spacers, saddles, MS terminal boxes 1.6 mm thick pre-painted, covered with 3mm thick plastic laminated sheet top cover for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dollyComplete all as specified and directed by Engr-in-Charge. for (a) one light/bell/fan point controlled by one single pole, one way switch 5 Amps.

All as per srl item No165 above but One 3 pin 5 Amp socket outlet point controlled by one switch on same board .

All as per srl item No-165 above but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

M&L for point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 2.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade 20mm dia, wall thickness not less than 2.00 mm duly ISI marked with all accessories such as bends, reducers, spacers, saddles, MS terminal boxes 1.6 mm thick pre-painted, covered with 3mm thick plastic laminated sheet top cover for mounting switch/sockets outlet, fan regulators etc complete with and including continuous earth wire of size 2.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly. Complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 4 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade 20mm dia, wall thickness not less than 2.00 mm duly ISI marked with all accessories such as bends, reducers, spacers, saddles, MS terminal boxes 1.6 mm thick pre-painted, covered with 3mm thick plastic laminated sheet top cover for mounting switch/sockets outlet, fan regulators etc complete with and including continuous earth wire of size 4 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly. Complete all as specified and directed by Engr-in-Charge.

S & F switch piano flush type single pole, one way 5/6 Amp.Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S & F s/socket outlet flush type two in 1, 3/5 Pin, 5 Amp, 230 Volts Complete all as specified and directed by Engr-in-Charge. Make:- Legrand/ Siemens/ Schneider / L&T.

S & F socket outlet flush type two in 1, 3/5 Pin, 15 Amp, 230 Volts Complete all as specified and directed by Engr-in-Charge. Make:- Legrand/ Siemens/ Schneider / L&T.

S&F switch socket combination flush type multipurpose 3/5 pin suitable for 15 Amp Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S&F lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings.Complete all as specified and directed by Engr-in-Charge.

S & F in repairs modular switch single pole, one way 5/6 Amp.Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S & F in repairs modular socket outlet flush type two in 1, 3/5 Pin, 5/6 Amp, 230 Volts Complete all as specified and directed by Engr-in-Charge. Make:- Legrand/ Siemens/ Schneider / L&T.

S & F in repairs modular socket flush type multipurpose 3/5 pin suitable for 15 Amp Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S & F in repairs modular switch flush type 15 Amp single pole one way. Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S & F in repairs modular switch socket combination flush type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch. Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S & F bell switch single pole, one way 5/6 Amp.Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S&F bell ding dong 230 volts 50 Hz AC. Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S&F LED lamp of 12 watts 230 volts type. Complete all as specified and directed by Engr-in-Charge. Make:Syska /GE /Philips /Crompton

S&F LED lamp of 7 watts 230 volts type. Complete all as specified and directed by Engr-in-Charge. Make:Syska /GE /Philips /Crompton

S&F MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engr-in-Charge Make:ABB/Siemens/Hager.

S&F in repairs MCB DB 6 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engr-in-Charge Make:ABB/Siemens/Hager.

S&F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door when MCB to be used suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engr-in-Charge Make:ABB/Siemens/Hager.

S&F MCB single pole 6-32 Amp, Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

S&F in repairs MCB single pole 6-32 Amp, fixed in DBs Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

S&F in repairs MCB single pole and neutral 40 Amp, fixed in DBs. Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/ Schneider)

S&F MCB single pole and neutral 40 Amp, Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

S&F ceiling rose surface bakelite surface 65x50 mm, 3 trminals fixed on wall/ceiling and including PVC block.Complete all as specified and directed by Engr-in-Charge.

S&F 1 X 20 W basic all purpose surface and wall mounted LED batten with extruded aluminium housing provided for efficient heat dissipation with polycarbonate housing & integrated electronic driver. Make:- Bajaj/ Philips/Havells.

S&F in repairs 1 X 18 W LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. Make of Bajaj / Philips/Havells.

S&F in repairs 1 X 18 W neutral white DOVEE PRO- recess mounting professional grade (100 lm/w) LED down light, PC diffuser replaceable electronic drivers suitable for office. Complete all as specified and directed by Engr-in-Charge. Make: Bajaj / Philips/Havells.

S&F water storage heater type of capacity 25 Ltrs, 230 volts AC 50 Hz incld PVC connection of size 15 mm dia & 900 mm long for hot water of approved make. Complete all as specified and directed by Engr-in-Charge.

S&F non- metalic exhaust fan 150 mm sweep 230 volts connecting up incld provision of cable from ceiling rose. Complete all as specified and directed by Engr-in-Charge. Make: Bajaj / Philips/Havells.

Supply, lying and fixing service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 4 sqmm .Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

Supply, lying and fixing service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm .Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

Supply, lying and fixing in repairs service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm, incld taking down old unsv cable, Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

Supply, lying and fixing service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm .Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

Supply and fixing in repair House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 degree bends. M.S. hook and stay or guy complete all as specified and directed by Engr-in-Charge.

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling Complete all as specified and directed by Engr-in-Charge. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM) Make : Havells /Polycab/Finolex.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. (Note : The rate is inclusive of necessary earth work, RFR and removal etc )

M/s Mohammad Shafi Malik

M/S MOHD YAQOOB KHAN AND CO

m/s mohd rafiq lone

M/S GHULAM HASSAN MALIK