PROVISION OF MODULAR KITCHEN AT BUILDING NO 12 UNDER AGE B/R WORLI MUMBAI

1. Work shall be carried out from GL to 14th Floor , with all necessary arrangements for working at height by the Contractor. 2. Quoted rates shall include the scaffolding, labour safety systems, safety nets, protective/waterproofing coverings, and debris removal/disposal as per BMC rules . No additional payment shall be admissible. 3. As the work is in occupied accommodation, the Contractor shall ensure the safety of occupants, protection of existing fittings/property, and daily clearance and cleaning of the site during execution. 4. The Contractor shall provide the applicable warranty/guarantee for Items No 4 to 8 are to be executed for modular kitchen std .So factory fitted approved decors /interiors to be executed and also necessarry warrenty ( minimum 5 Years ) /gurandee ceritificates also applicable of those items , contractors shall be sumbitted all manufacuture warrenty from the manufactures and during the warrenty period necessary repair defects shall be reactified. 5.All necessary finishing works, accessories and allied items required for completion of the modular kitchen work shall be deemed to be included in the Contractor’s scope. Modular Kitchen factory maker :- Paradise Kitchen World & Interior, Kanjurmarg West, Mumbai-78, or equivalent Interior / Factory maker as approval by the GE. Demolition of brick work / brick masonry /PCC stone or boulder masonary built in cement or cement lime mortar , including all quions. Arches,pillers etc but excluding ashlar facings dressed stone work and precast concrete articles etc complete all as specified and directed .

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 / 350x250mm / 450X 350 of 6 to 7mm thick on vertical surfaces( Wall tiles ) such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

KITCHEN AREA - Bottom Cabinet (Below existing Counter ) Providing and fixing modular kitchen shutters of 18 mm thick BWP Marine Plywood, GURJAN make, with 1.0 mm thick Merino HPL high-gloss laminate on the front face and 0.6–0.8 mm thick balancing laminate on the rear face, including 1.0 mm thick PVC edge banding on all exposed edges, complete as per the approved design and elevation. Hardware – Hettich (Germany) Original: Shutters shall be provided with Hettich make auto soft-close concealed hinges, 110° opening, slide-on type, MS nickel-plated, with built-in soft-close mechanism, including matching mounting plates and screws. The hinges shall provide smooth, silent and controlled closing and shall be of a minimum 80,000-cycle tested capacity. All Hettich hardware shall be 100% genuine and supplied in original Hettich box packing. The quoted rate shall be inclusive of all necessary materials, hardware, accessories, labour, cutting, drilling, fixing, alignment, adjustment and finishing, including hinges, drawer channels/tracks, pull-out fittings, baskets, bottle pull-outs, corner pull-outs, trolley fittings, soft-closing mechanisms, handles and all necessary mounting/fixing accessories, suitably matched with the existing kitchen/platform, complete in all respects as per the approved and as directed by the Engineer-in-Charge. Note: 1. Only the front-facing area of the cabinet, measured as Length × Height (L × H), shall be considered for measurement and payment. 2. Steel baskets are not included in this rate and shall be measured and paid separately under Item No. 7. 3. Any additional available space, other than the area covered under the cabinet shutters, shall be provided with openable shutter or drawer-type units, along with internal partitions, racks and other necessary fittings, as required and as directed by the Engineer-in-Charge.

KITCHEN AREA- Fully Modular Service Counter Providing and fixing fully modular service counter comprising base cabinets and shutters, with factory-made modular carcass/box of 18 mm thick BWP Marine Plywood, GURJAN make, including sides, bottom, vertical partitions and horizontal shelves, with 6 mm thick Marine Plywood back panel for moisture protection. All joints shall be executed using Minifix fittings, dowels and suitable wood adhesive, in fully Knock-Down (KD) factory-type construction, without use of nails.Shutters shall be of 18 mm thick BWP Marine Plywood, GURJAN make, finished with 1.0 mm thick decorative laminate on the front face in High-Gloss/Matt Suede finish, as per approved shade card, and 0.6 mm thick white balancing laminate on the rear face, including 1.0 mm thick PVC edge banding on all four sides, as per approved elevation.Hardware: Hettich (Germany) original auto soft-close concealed hinges, 110° opening, slide-on type, MS nickel-plated, with built-in soft-close mechanism, mounting plates and screws, providing smooth and noiseless operation, tested for 80,000+ cycles. Hettich hardware shall be 100% genuine, supplied in original Hettich box packing . The quoted rate shall be inclusive of all necessary materials, hardware, accessories, labour, cutting, drilling, fixing, alignment, adjustment and finishing, including hinges, drawer channels/tracks, pull-out fittings, baskets, bottle pull-outs, corner pull-outs, trolley fittings, soft-closing mechanisms, handles and all necessary mounting/fixing accessories, suitably matched with tas per Site Condition , complete in allspecified and as directed by the Engineer-in-Charge. Note: 1. Only the front-facing area of the cabinet, measured as Length × Height (L × H), shall be considered for measurement and payment. 2. Steel baskets are not included in this rate and shall be measured and paid separately under Item No. 7. 3. Any additional available space, other than the area covered under the cabinet shutters, shall be provided with openable shutter or drawer-type units, along with internal partitions, racks and other necessary fittings, as required and as directed by the Engineer-in-Charge.

TOP CABINET - FULLY MODULAR WITH PROFILE SHUTTERS ( Wall Mounted ) . Providing and fixing fully modular top cabinet, factory-made, comprising carcass/box and aluminium profile shutters, complete in all respects as per approved design, elevation, BOQ requirements and actual site dimensions, including all materials, hardware, accessories, labour, transportation, loading/unloading, cutting, drilling, fixing, alignment, adjustment and finishing.The carcass/box shall be made of 18 mm thick BWP Marine Plywood conforming to IS: 710, GURJAN make, comprising top, bottom, sides, vertical partitions and horizontal shelves, with 6 mm thick Marine Plywood back panel. All internal faces shall be finished with 0.8 mm thick White Suede / Light Colour Laminate, including necessary adhesive. The carcass shall be factory-made and assembled using Minifix fittings, wooden dowels and high-strength adhesive in a 100% Knock-Down (KD) factory-fitted system. Panels shall be CNC precision cut for accurate dimensions and proper alignment, and no nails shall be used.Shutters shall be provided with premium Aluminium Profile Frame of Gola Profile / C-Profile / Handleless Profile, as per approved design and elevation, using 45 mm wide powder-coated/anodised aluminium profile in Black / Rose Gold / Champagne / Stainless Steel finish, as approved by the Engineer-in-Charge. Shutter infill shall be 4 mm thick Glass / Clear Glass / Fluted Glass, as per approved elevation, properly cut and securely fixed within the aluminium profile frame with rubber beading, gaskets and necessary glazing accessories.The rate shall include all necessary hardware and accessories for complete and functional installation, including auto soft-close concealed/profile-compatible hinges, matching mounting plates and screws, aluminium profile corner connectors, glass holding arrangements, gaskets/beading, handles or handleless opening arrangement, magnetic catches/push-to-open fittings wherever required, Minifix fittings, dowels, screws, fasteners, brackets and other necessary accessories.All exposed edges, joints and profiles shall be neatly finished. The cabinet shall be installed plumb, level and properly aligned with the existing wall/cabinet arrangement. The rate shall include all necessary site cutting, drilling, levelling, fixing, alignment, adjustment and finishing.The quoted rate shall be inclusive of all materials, plywood, laminates, aluminium profiles, glass, hardware, accessories, labour, transportation, loading/unloading, installation and finishing, complete in all respects as specified in the BOQ and as directed by the Engineer-in-Charge. Note:- Only front facing area of Cabinet wiil be meassured ( L X H ) for payment purpose

S & F for Jet Black Granite countertop , including cutting, shaping and polishing, with nosing edge as per approved profile, fixed over the counter/base using required adhesive/paste/glue etc , including all necessary , supports, fixing accessories and other materials required for proper installation, complete in all as Specified and as directed by the Engineer-in-Charge.

ACCESSORIES FOR - KITCHEN WIRE BASKET ( CP /SS ) Providing and fixing Kitchen Wire Baskets of approved size, made of SS 304 grade wire with nickel-chrome plated/powder-coated finish, using 2–3 mm thick wire, complete with basket frame and heavy-duty SS telescopic channels/slides with soft-close mechanism, suitable for 450 mm cabinet depth.The baskets shall be of standard sizes of 450 mm / 500 mm / 600 mm width, approximately 400 mm depth and 100 mm / 150 mm / 200 mm height, as suitable for the existing cabinet and as per approved elevation. Each basket shall have a minimum load-carrying capacity of 15–20 kg and mirror-chrome finish.The rate shall include all necessary slides/channels, fittings, fixing accessories, installation, alignment and adjustment, complete in all respects as per approved elevation and as directed by the Engineer-in-Charge Kitchen Accessories - Plain Basket - 01 No. Cup & Saucer Basket- 02 Nos. Thali/Plate Basket with Partition - 01 No. Cutlery/Katori Basket- 02 Nos. Bottle Pull-Out- 01 No. Corner Pull-Out - 01 No

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge

M&L for Virified tiles (light shade ) 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar (1:6) and pointed with epoxy grouted with suitable pigment (mixed with white cement )to match the colour of tiles complete all as specified.