Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹31.7 L+₹23,945.46 (0.76%)Rejected-Finance SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-Finance Being Not Lowest | |
| 3 | L3₹32.3 L+₹79,383.95 (2.52%)Rejected-Finance | L3 | Rejected-Finance Being Not Lowest | |
| 4 | L4₹35.8 L+₹4.3 L (13.6%)Rejected-Finance | L4 | Rejected-Finance Being Not Lowest |
Tender Value
₹37.4 L
EMD Value
₹74,800
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GE MCEME Secunderabad MCEME Campus, Trimulgherry (Post) Secunderabad - 500 015
PROVISION OF CERTAIN SANCTIONED WORKS AT MCEME UNDER GE MCEME SECUNDERABAD
2022_MES_552613_2
GE/MCEME/TOK/42 OF 22-23
Open Tender
Civil Works
Item Rate
180 days
GE MCEME SECUNDERABAD
Class E Category a(I)
9 documents required · 9 mandatory
₹500
GE MCEME SECUNDERABAD
₹74,800
Yes
16 Dec 2022
26 Oct 2022
24 Nov 2022
26 Oct 2022
22 Nov 2022
10 Nov 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer in Charge
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer in Charge
Excavation over area not exceeding 1.50 m depth and getting out in soft/loose soil complete all as specified and as directed by Engineer in Charge.
M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer in Charge.
M&L for Cement concrete type D2 1:4:8 (40 mm graded stone aggt) 150 mm thick as in sub base to flooring complete all as specified and as directed by Engineer in charge
M & L 100 mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) hard standing, finished even and smooth with out using extra cement complete all as specified and as directed by Engineer in Charge.
Removing excavated soil exc.250m but n.exc 500m and depositing where directed by Engr-in -charge complete all as specified and as directed by Engineer in Charge.
Excavating in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, soft/ loose soil etc, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in any kind of soil complete all as specified and as directed by Engineer in Charge.
M&L PCC 1:3:6 type C2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as specified and as directed by Engineer in Charge.
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed by Engineer in Charge.
S & F 0.50mm thick plain galvanised, mild steel sheeting ,in ridges,hips,valley gutters,drip and straight flashings (length and girth as fixed) with grade of zinc coating by manufactureres instruction or directed by Engr-in-Charge complete all as specified and as directed by Engineer in Charge.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins here connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates quality conforming to Fe 410W(Gde-250)complete all as specified and as directed by Engineer in Charge.
S&F Steel work in tubular trusses / rectangular or square, Hollow mild steel sections for structural use, including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S.1161-1979 grade St-240, and Painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and as directed by Engineer in Charge.
M & L Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.
S& F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, etc complete all as specified and directed by Engineer-in-Charge.
S&F 180 mm dia of PVC(SWR) pipes of 6 kg/ sqcm pressure rating , half round ready made eave gutter of approved make including necessary fitting like bend WC/ MS clips ETC complete all as specified and as directed by Engineer in Charge.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl taking down old pipes complete all as specified and as directed by Engineer in Charge.
S&F 110mm PVC (SWR) bend any radius complete all as specified and as directed by Engineer in Charge.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth for foundation of footing/wall etc. getting out in hard/dense soil complete all as specified and as directed by Engineer in Charge.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engineer in Charge.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Fair finished surfaces of flat concrete complete all as specified and as directed by Engineer in Charge.
M&L For RCC 1:1 1/2:3 20mm graded stone aggregate, Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer in Charge.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4complete all as specified and as directed by Engineer in Charge.
M&l for PCC (1:2:4) type B1 using 20mm graded stone aggregate in coping including necessary form work and finishing exposed concrete surfaces fair and even and weathering, slightly rounded or chamfered angle and throating complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending sprially for columns, hooks ends and binding with Mild steel wire (annealled) not less than 0.90mm dia (or) securing with clips complete all as specified and as directed by Engineer in Charge.
All as per item No. 27 above but 8mm dia and over upto and including 10mm dia in stirrups spaces and bendings complete all as specified and as directed by Engineer in Charge.
M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed by Engineer in Charge.
M&L for applying Two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and as directed by Engineer in Charge.
M&L for Anodised powder coated aluminium section for partition/window with one or more rebates including joining cleat for fixing etc in repair complete all as specified and as directed by Engineer in Charge.
M&L for 4 mm thick sheet glass ,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 105 x 60 mm complete all as specified and as directed by Engineer in Charge.
S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer in Charge.
S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer in Charge.
M&L for preparation of new or previously untreated surface of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L RCC type B1 (1:2:4) using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer in Charge.
Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and as directed by Engineer in Charge.
M&L Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engineer in Charge.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and as directed by Engineer in Charge.
M&L 25mm average thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floors, etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer in Charge.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and as directed by Engineer in Charge.
M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4 complete all as specified and as directed by Engineer in Charge.
M&L for applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface complete all as specified and as directed by Engineer in Charge.
S&F vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillat tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.
S&F PVC connection pipe 15mm bore 600mm long with PTMT Nuts complete all as specified and as directed by Engineer in Charge.
S&F in CP 15mm, stop valves/ angle cock, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed by Engineer in Charge.
S&F CP tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified and as directed by Engineer in Charge.
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer in Charge.
M&L for bend PVC (SWR) 75mm dia of any radius,fixed to walls/laid in floor , complete all as specified and directed by Engineer-in-Charge.
M&L rotational moulded polyethylene water storage tanks three layered (cylindrical verical with closed top) hoisted and fixed in position all as specified in 1000 ltrs capacity with15 mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) ball valve screwed for iron pipe or brass ferrule complete all as specifed and directed.
S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed by Engineer in Charge.
S&F Ball valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer in Charge.
S&F GI Tubes, 'medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and as directed by Engineer in Charge.
S&F GI Tubes, 'medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and as directed by Engineer in Charge.
M&L Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per manufacturers instruction complete all as specified and as directed by Engineer in Charge.
M&L factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed by Engineer in Charge.
S&F 100 mm long butt hinges extruded aluminium alloy with brass/bronze hinge pin in lieu of mild steel min complete all as specified and as directed by Engineer in Charge.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by Engineer in Charge.
S&F 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed by Engineer in Charge.
S&F steel windows/ventilator with slide/top hung shutters inculdign box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer in Charge.
M&L for preparation of new steel surfaces of any description,over 10cm in width or girth with two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed by Engineer in Charge.
S&F figured glass 3.0mm thick, pin head type & glazing with glazing clips in squares n exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer in Charge.
S&F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.
S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165,etc complete all as per specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer in Charge.
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in CM 1:6 complete all as specified and as directed by Engineer in Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils, complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base etc., complete all as specified and directed by Engineer-in-Charge.
M&L for sand cushion/bed for laying interlocking tiles / paver blocks, complete all as specified and directed by Engineer-in-Charge.
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with gery cement and no pigment, , complete all as specified and directed by Engineer-in-Charge.
M&L Treating surfaces of ends of post etc area n.exc 0.1 sq.m each tretad with tar or coal tar black paint complete all as specified and as directed by Engineer in Charge.
M&L Providing cement concrete 1:2:4 in foundations, including raft footings, foundation beams and mass concrete.Type B-1,(using 20 mm graded aggregate), all as directed by Engr-in-charge.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed by Engineer in Charge.
M&L cement concrete type B1, 1:2:4 (20mm graded Aggregate) 40 mm thick in floor finished fair and smooth using extra cement complete all as specified and as directed.
M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plaster surface of wall and applying two coat of white wash over a coat of primer complete all as specified and directed
M&L RCC type B1 (1:2:4) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engineer in Charge.
M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Chajjas complete all as specified and as directed by Engineer in Charge.
Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat complete all as specified and as directed by Engineer in Charge.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surface complete all as specified and as directed by Engineer in Charge.
S&F Windows/ventilators (NCL ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge.
S/F pressed steel door frame 125 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate etc complete all as specified and directed
S & F 35 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on face is covered with decorative face veneer both sides , complete all as specified and directed by Engineer-in-Charge.
S&F of 35mm thick Second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or , complete all as specified and directed by Engineer-in-Charge.
S&F 200mm long Aluminium anodised or matt finished barrel tower bolt of extruded section , complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer in Charge.
S&F 15mm dia bib taps, chromium plated fancy type cast copper alloy with fancy type handle, screwed down screwed for iron pipe or for brass ferrule with all flange complete all as specified and as directed by Engineer in Charge.
S&F in repairs PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer in Charge.
M&L good quality red soil (obtained from outside MD land) filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, etc complete all as specified and directed by Engineer-in-Charge.
M&L for Treating the top surface of filled earth for anti termite treatment at rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for Treating the soil under plinth protection anti termite treatment at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
Material and labour for concealed point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit concealed wiring in walls/PVC conduit on wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP
All as per item No. 95 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator
All as per item No. 95 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
All as per item No. 95 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the independent board.
All as per item No. 95 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.0 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.
Material and labour for surface type point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit concealed wiring in walls/PVC conduit on wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP
Supply and fixing of Switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified and as directed by Engineer in Charge.
Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified and as directed by Engineer in Charge.
Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified and as directed by Engineer in Charge.
Supply and fixing switch socket combination 2 in 1 multipurpose 3 pin 5/15 amps flush type complete all as specified and as directed by Engineer in Charge.
Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed by Engineer in Charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
Supply and fixing LED tube light fitting 1x 18W, 220V, AC, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
S & F LED light fitting 1x9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fix LED energy efficient security light fitting of capacity of 35 W including suitable dia GI pipe bracket for fixing the light on wall all as specified and directed. NOTE : quoted rate included the suitble GI pipe bracket,nuts and bolts.
Supply and fix LED energy efficient security light fitting of capacity of 40 W including suitable dia GI pipe bracket for fixing the light on wall all as specified and directed. NOTE : quoted rate included the suitble GI pipe bracket,nuts and bolts.
Supply and fixing Exhaust fan, heavy duty, 230/300mm sweep metal body with louvers, AC single phase, 230 Volts, 1400 rpm and connecting up with and including necessary 3 core PVC insulated copper flexible cord of size 23/0.019 from exhaust fan to the ceiling rose including making hole in the wall and making good edges in cement plaster complete all as specified and directed.
Supply and lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 16 Sqmm , 2 core all as specified and directed.
Supply and lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 16 Sqmm , 3.5 core all as specified and directed.
Supply and lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 10 Sqmm , 3 core all as specified and directed.
Supply, spread river sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid complete all as specified and as directed by Engineer in Charge.
Supply and fixing medium grade GI tubing of 32 mm dia for XLPE cable protection complete all as specified and as directed
Supply and fixing medium grade GI tubing of 25 mm dia for XLPE cable protection complete all as specified and as directed
Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified and as directed by Engineer in Charge.
Supply and fixing at LT pole and MCB DBs, the medium grade GI tubing of 40 mm dia for XLPE cable protection complete all as specified and as directed.
Supply and replace MCB double door DB SPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and as directed by Engineer in Charge.
Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and as directed by Engineer in Charge.
Supply and fix in repair MCB SPN 40 Amps 240 volts for fixing on MCB DB complete all as specified and as directed by Engineer in Charge.
Supply and fix in repair MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB complete all as specified and as directed by Engineer in Charge.
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.)
SAI RUPA CONSTRUCTIONS
P VIJAY KUMAR
M/S DIVIJA BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .