RequiredExperience with Government Bid to RA enabled Yes Hf Transceiver ( 33 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) FEATURES Transceiver Type 100 Watts HF 100 Watts HF Transceiver Modes Single side band (SSB) (single-sideband suppressed-carrier (J3E)) Upper side band (USB)
RequiredLower side band (LSB)
RequiredAmplitude modulation (AM)/AM(E)
RequiredContinuous wave (CW) Modulated continous * 1/6 wave (MCW)
RequiredAudio frequency shift keying (AFSK) Frequency Range 2.0 MHz to 29.9999 MHz with 100 Hz channel spacing & 10 Hz Resolution * Number of Channels (Channels) 500 * Built in Front panel testing Yes * Antenna impedance (ohm) 50 Ω (unbalanced) * Headphone impedance 150 * Interface type RS-232 * programming PC programming software & front panel programming * Scanning (channels per second) 5 * ALE features ALE 2G as per Appendix 'A' of MIL- STD-188-141 B * Selective calling Digital FSK coading (4/6 digit select call) * Flash messages (Pre- defined messages)(Number of characters) 60 * Vocoder MELP/ACLP (1200/2400 bps) * Frequency Hopping Without Frequency Hopping * Data Modem MID-STD-188-110A
RequiredSingle tone >4800 bps Built-in * Inbuilt GPS Interface with polling facility Yes * Data Communication Provision for Data Communication * Tele Call The Radio set should have capability to Dial & operate data * RS-232 control Radio set capability to operate on 4800 baud rate or more * Contineous Tunable Yes * 2/6 Receiver Radio Kill/Un-Kill function Yes * Remote operation Capable to operate from remote location * Audio input sockets (Mic & External socket) Yes * Push to talk (Suitable Microphone to be provided) Yes * Audio sockets (Suitable Headgear to be provided) Yes * other features - * TRANSMITTER PARAMETER Transmitter power consumtion - * Transmitter RF Power (user programmable) 15W to 100W PEP (low
Requiredmedium
Requiredhigh) * VSWR 1.5 * Spurious Emission ≤ 50mW and 40db or more below PEP (Applicable for 100 watt HF transreceiver) * Modulation sensitivity 1 to 10mV at 1 KHz for full power under SSB mode * In band inter modulation distortion (db) 35 * Carrier Suppression (db) 60 * Inter modulation distortion (db) 30 * Audio Response of Transmitter within 6db from 300Hz to 2700 Hz * Side tone level Better than 0.1mW in to 150Ω load for 5mV of audio input at 1 KHz * RECEIVER PARAMETER Receiver power consumption 6.8 * Receiver sensitivity (-)111 dbm for 10 db SINAD or better * Image Rejection (db) 90 * IF rejection (db) 70 * Audio Response of Receiver:- within ± 6 db from 350Hz to 2700 Hz * 3/6 Audio output (watt) 2 * Audio frequency harmonics distortion (db) 25 * Squelch High quality syllabic squelch * OPERATING CONDITION Operating Temperature Range -10 oC to +55 o C * Storage Temperature range -30 oC to +60 oC * Humidity 95% at 40 deg C non- condensing * BATTERY DETAILS Type of Battery NA * Battery Voltage 12 * Battery Capacity (Duty cycle: 5/5/90) NA * Suitable Battery Charger shall be provide Supplied seperately * GENERIC Power Source 12 DC Nominal (10.8V to 14.4V)
Required230V AC
Required± 10%
Required50Hz * Weight of Transreceiver <10kg (100 Watts HF) * Cooling Built in fan/Heat sink * Visual display LCD * SAFETY Protection Reverse polarity (without fuse)
RequiredProtection against high VSWR * Communication Security Yes * ACCESSORIES Details of Standard accessories covers under scope of supply like different types of Antenna
RequiredMount kit etc Shall be provided - * TEST REPORT DETAILS & TESTS Availability of the test report from Central Govt/NABL/ILAC acredited lab covering all the declared parameters as per Governing specification Yes * Test Report No and date - * 4/6 Name and Address of the Test lab - * Dust test as per MIL-STD-810 G * Vibration test as per MIL-STD-810 G * Shock test as per MIL-STD-810 G * Water Intrusion test as per MIL-STD-810 G * Altitude test as per MIL-STD-810 G * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
