REPAIR MAINT OF SUBMAIN WIRING INTERNAL ELECTRIFICATION AT MD ACCNS AT CHORD LINE AND MU CAMP INCL OR LINES OF 507 ABW AT KANKINARA MIL STN UNDER GE N KOLKATA

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting for wiring shall bemeasured and paid separately.

All as per item No. 2 above but, One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No. 2 above but, One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per item No. 2 above but, One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per item No. 2 above but, One call bell point controlled by one switch complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting for wiring shall be measured and paid separately

Material and labour for surface point wiring (surface type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping / conduit pipe medium grade of suitable size but not less than 20 mm and accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete, for One light point controlled by one switch complete all as specified and directed. all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.

All as per iem No. 8 above, but for One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per iem No. 8 above, but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per iem No. 8 above, but for One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per iem No. 8 above, but for One call bell point controlled by one switch complete all as specified and directed.

Material and labour for surface point wiring (surface type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping / conduit pipe medium grade of suitable size but not less than 20 mm and accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.

M&L for concealed point wiring for modular wiring (concealed type) with FRLS PVC insulated sheathed stranded copper conductor cable of size 1.5 Sqmm with FRLS PVC insulated sheathed stranded copper cable of size 1.5 Sqmm for earth continuity conductor to be drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm and and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of modular metal flush box pressed steel sunken terminal made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer of suitable size and module MS sheet metal switch/ terminal box 1.2 mm thick including modular white cover plate with frames to accomodate modular switch/ socket, etc of suitable size and modules including making good the surface with the wall all as specified and directed for One light point controlled by one switch complete all as specified and directed.:- Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate). :-

All as per iem No, 14 but, One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per iem No, 14 but, One 3/5 pin socket outlet 5 Amp on independent board complete all as specified and directed.

All as per iem No, 14 but, One 3/5pin 6 Amp Socket outlet on the same board with other switch complete all as specified and directed.

All as per iem No, 14 but, One call bell point controlled by one bell push switch button on independent board complete all as specified and directed.

M&L for concealed point wiring for modular wiring (concealed type) with FRLS PVC insulated sheathed stranded copper conductor cable of size 2.5 Sqmm with PVC insulated sheathed stranded copper cable of size 2.5 Sqmm for earth continuity conductor to be drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm and and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of modular metal flush box pressed steel sunken terminal made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer of suitable size and module MS sheet metal switch/ terminal box 1.2 mm thick including modular white cover plate with frames to accomodate modular switch/ socket, etc of suitable size and modules including making good the surface with the wall all as specified and directed for :- Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be measured and paid separately.. Makefor item Nos, 2 to 19:- Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Make of conduit:- Plaza / Presto Plast / Precision/ M/S AGK Industries.

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed

Supply and fix socket out let 3/5 pin 5 Amp 240 volt.all as specified and directed

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all as specified and directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Supply and fix bell push 6 amps complete all as specified as directed

Matetial and labour for call bell ding dong type AC 230 volt single pole complete all as specified as directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed

Supply and fix Modular switch 1 way 6 A, 1 module

Supply and fix Socket, 6A - 5 pin combined 2 module

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module

Supply and fix Modular Bell push 6A 1 module

Supply and fix Fan step regulator, 120W - 2 module

Supply and fix modular cover plate with frame of modules :- 1 module

All as per item No. 35 above, but for 2 module

All as per item No. 35 above, but for 2 module 3 module

All as per item No. 35 above, but for 2 module 4 module

All as per item No. 35 above, but for 2 module) 6 module

All as per item No. 35 above, but for 2 module8 module

Supply and fix modular metal flush box of following modules :- 1 module

All as per itm No. 41 abovr, but 2 module

All as per itm No. 41 abovr, but 3 module

All as per itm No. 41 abovr, but 4 module

All as per itm No. 41 abovr, but 6 module

All as per itm No. 41 abovr, but 8 module Make for item Nos, 20 to 46:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make : T/L fitting -Century LED Ltd Cat Part No KCCF02000863/Philips Cat Part No - TMC 501 P 1xT-LED 22W P3241/Wipro Cat Part No - WIO921208 or equivalent in M/s Pyrotech/ Havells/ C&S/Halonix/ HPL/ Bajaj/ Jaquar/Simoco/Panasonic. Make : LED T/L Rod-Century LED Ltd Cat Part No -TWPP020C/Philips Cat Part No. MAS LED tube 1200mm 18W865 T81/Wipro Cat Part No LL13-181-65SE or equivalent in M/s Pyrotech/ Havells/ C&S/Hallonix/ HPL/ Bajaj/ Jaquar/Simoco/Panasonic.

Supply and fix LED light fitting (cealing) recessed/ surface mounted 600mm x 600mm 36 watt LED provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv lig ht fitting all as specified and directed. Make - Century LED Ltd Cat Part No PCRA036C2033 or equivalent in Wipro/ Philips/ M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/ Bajaj/ Jaquar/ Simoco/ Panasonic.

M&L for LED light fitting (cealing) recessed/ surface mounted 1 ft x 1 ft 24 watt LED provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed. Make : Century LED Ltd CAt Part No PCHP024C0974 or equivalent in Wipro/ Philips/ M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/ Bajaj/ Jaquar/ Simoco/ Panasonic.

Supply and fix decorative wall light fixture city 1 type made up of polycarbonate suitable for 9 W retrofit LED lamp B22 base to be fitted on wall including necessary electric connection with three core twisted flexible copper cable of suitable size from existing ele supply to connector of light fitting complete including taking down old unsv light fitting complete all as specified and directed. Make - Havells Cat Part No - LHDL02160099/ or equivalent in M/s Pyrotech electronics Pvt Ltd. / Havells / C&S / Halonix / HPL / Bajaj / Jaguar / Simoco / Panasonic

Supply and fix decorative wall light fixture city 2 type made up of polycarbonate suitable for 9 W retrofit LED lamp B22 base to be fitted on wall including necessary electric connection with three core twisted flexible copper cable of suitable size from existing electric supply to connector of light fitting complete including taking down old unsv light fitting complete all as specified and directed. Make - Havells Cat Part No - LHDL03160099 or equivalent in M/s Pyrotech electronics Pvt Ltd. / Havells / C&S / Halonix / HPL / Bajaj / Jaguar / Simoco / Panasonic

M&L for LED light fitting (cealing) recessed/ surface mounted round type 15 watt LED provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed. Make : Century LED Ltd Cat Part No PCHP015C0959 or equivalent in wipro / Philips/ M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/Bajaj/ Jaquar/ Simoco/ Panasonic.

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make : Century LED Ltd Cat Part No BWMP010C2136 or equivalent in wipro / Philips/ M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/Bajaj/ Jaquar/ Simoco/ Panasonic.

Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. Make : Century LED Ltd Cat Part No HWAR012C0168 or equivalent in wipro / Philips/ M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/Bajaj/ Jaquar/ Simoco/ Panasonic.

Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete including taking down old light fitting any type complete all as specified and directed. Make : Century LED Ltd Cat Part No SPSP045C/ Bajaj Cat Part No BRTFG 45W LED I/ Wipro cat part No LR02-501-XXX-57-XX or equivalent in M/s Pyrotech/ Havells/ C&S/ Halonix/ HPL/Bajaj/ Jaquar/ Simoco/ Panasonic.

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed. (Note : (i) Three run of 2.5 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces shall be measured and paid separately. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Make of conduit:- Plaza / Presto Plast / Precision/ M/S AGK Industries.

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 4 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces shall be measured and paid separately. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Make of conduit:- Plaza / Presto Plast / Precision/ M/S AGK Industries.

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 25 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 6 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces shall be measured and paid separately. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Make of conduit:- Plaza / Presto Plast / Precision/ M/S AGK Industries.

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.Note:- MCB shall be measured and paid seperatly. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fix metal DP enclosure with DIN rail channel suitable for mounting MCB SPN including taking down the old enclosure and connection complete all as specified as directed. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fix metal FP enclosure with DIN rail channel suitable for mounting MCB TPN including taking down the old enlcosure and connection complete all as specified as directed.

Supply and fix MCB 4 pole enclosure IP 55 04 way with DIN rail channel suitable for mounting MCB TPN including taking down the enclosure and connection complete all as specified as directed.

Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as

Supply and fix MCB TPN 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB TPN 32 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB single pole & neutral 40 to 63 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make: C&S/ INDOASIAN/ L&T / Havells

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix Blanking plate for MCB DB complete all as specified as directed

Supply and fix power unit combo 20 Amp MCB protected socket complete including taking down the old socket and connection complete all as specified as directed.

Supply and fix metal clad 20 A SPN plug suitable for metal clad AC box complete after taking down the old plug and connection complete all as specified as directed.

Supply and fix metal clad 20 A SPN socket suitable for metal clad AC box complete after taking down the old socket and connection complete all as specified as directed.

Supply and fix AC motor starter 16 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified as directed.

Supply and fix AC motor starter 25 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified as directed. Make for item Nos. 64 to 77:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager.

Supply and fix 3 pin plug top 25 Amps for air conditioner split type/ window type complete all as specified and directed. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Supply and fix 3 pin plug top 16 Amps for geyser 25/35/50 Ltrs complete all as specified and directed. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Supply and fix 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and directed. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed. Make for item Nos. 81 & 82:- :- M/s Havells / M/s Nicco / M/s KEI / M/s Polycab / Gloster / Universal) / HPL/ Dynamic cables / Finolex. / RR kabel / Mescab

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

GEYSERS Taking down carefully storage type water heater (Geyser ) of any make of capacity 25/35/50 Ltrs after removing all electrical and water connection from installed position at different locations,dismantling the geyser into parts for inspection.Checking /testing of all parts/accessories like appratus plate,heating element,thermostat switch,neon lamp, water tank,safety valve, spacer ring, rubber gasket,nut-bolts,inspection plate, bottom& top cover etc and complete,de-scaling of water tank and brazing the same to make it leak proof complete inclduing replacement of unserviceable spare parts and re-installation, making electric and water connections and testing all as specified and directed. Note : - (a) Old unserviceable parts required for replacement shall be measured & paid separately as supply only. The labour component involved for fixing new spares is deemed to be included in the quoted rate. all as specified and directed. (b) Painting if required shall be measured and paid separately all as specified and directed. The make of spares shall be as per existing or as approved by the GE.

Supply onlyApparatus assembly plate (8/9 hole) for Geyser of 25 /35 /50 Ltrs capacity, as per existing type and model complete all as specified and directed.

Supply only thermostat straight stem type as per existing model complete all as specified and directed.

Supply only heating element 1500 watt suitable for Geyser of 25 Litres capacity as per existing type and model complete all as specified and directed.

Supply only heating element 2000 watt Gyser of 25/35/50 Ltrs capacity as per existing type and model complete all as specified and directed.

SupplyonlyIndicating lamp LED type,as per existing model (Red/Green) (square/round) batten type for Geyser of 25/50 Litres capacity complete all as specified and directed.

Supply only15 mm dia 450 mm long PVC flexible cold water inlet pipe nut type complete all as directed. Make: Prayag /suprimo or equivalent as approved GE.

Supply only15 mm dia 450 mm long hot water pipe (inlet wire mess and nut type) water inlet pipe complete all as specified and directed.

Supply only 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated after taking down old one complete all as specified & directed.

Supply & connecting PVC insulated and overall PVC sheathed and flexible multistranded copper conductor cable 3 core of size 2.5 sqmm for 25/35/50 Ltrs capacity Geyser after taking down old one complete all as specified and directed. Make:- M/s Havells / M/s Nicco / M/s KEI / M/s Polycab / Gloster / Universal) / HPL/ Dynamic cables / Finolex. / RR kabel / Mescab

Taking down carefully the ceiling fans 1200 / 1400 mm of any make/model any type and size from existing position of high rise shed/ bldg from their existing position after disconnecting blades including other accessories / components, cleaning / greasing including rewinding burnout/worn-out winding and reassembling all components by provision of new and old serviceable components and fixing / hanging in existing position after repair/painting work complete all as specified and directed Note: -. (i)The spares shall be measured and paid separately under supply only items. The labour element involved for replacing the spares shall be deemed to be included in the unit rate quoted. (ii) Pa nting shall be measured & paid separately. (iii) Rewinding burnout/worn-out winding shall be measured & paid separately

All as per item No. 96 above but for Exhaust Fan metal body of size 230/ 300 mm

All as per item No. 96 above but for Exhaust Fan metal body of size 450/ 600 mm

All as per item No. 96 above but for Wall mounted air circulator fan heavy duty metal body of size 450/ 600 mm

All as per item No. 96 above but for Pedestal fan heavy duty metal body of size 450/ 600 mm

Supply only GM Bush for ceiling/ exhaust/ wall mounted/ pedestal fan complete all as specified & directed.

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6201) complete all as specified & directed. Make TATA/SKF/NBC

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6202) complete all as specified & directed. Make TATA/SKF/NBC

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6203) complete all as specified & directed. Make TATA/SKF/NBC

Supply only capacitor of 2.0 mfd capacitance complete all as specified & directed.

Supply only capacitor of 2.50 mfd capacitance complete all as specified & directed.

Supply only capacitor of 3.15 mfd capacitance complete all as specified & directed.

Supply only capacitor of 4.0 mfd capacitance complete all as specified & directed. Make for item Nos. 105 to 108:- Usha / Copco / L&T / C&S.

Supply & fixing MS sheet folded type louver for 230/300 mm sweep exhaust taking down old louver complete all as specified & directed.

Supply & fixing MS sheet folded type louver for 450 mm sweep exhaust taking down old louver complete all as specified & directed.

Material & labour for spray painting of ceiling fans 1200 / 1400 mm including blades/down rods/ canopy/stand, casing/ cage and all accessories after thoroughly rubbing /cleaning old rusted spot and paint by soft wire brush with one coats of synthetic enamel paint, first quality, of existing tint and marking MES No. complete all as specified and directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

All as per item No. 111 above but for Exhaust Fan metal body of size 230/ 300 mm

All as per item No. 111 above but for Exhaust Fan metal body of size 450/ 600 mm

All as per item No. 111above but for Wall mounted air circulator fan heavy duty metal body of size 450/ 600 mm

All as per item No. 111 above but for Pedestal fan heavy duty metal body of size 450/ 600 mm

Material and labour for rewinding of ceiling fans armature of 1200 mm/1400 mm sweep any make/ model with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of exhaust fan 230mm/ 300mm sweep any make/ model, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of exhaust fan 450 / 600 mm sweep of any make/ model, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of air circulator wall mounted fans/ pedestal fans 450/600 mm sweep any make/model with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Supply and fixing in replacement of fan blades for exhaust fan 230/ 300 mm sweep any make/model (as per existing sample) complete all as specified and directed.

Supply and fixing in replacement of fan blades for exhaust fan 450 mm sweep any make/model (as per existing sample) complete all as specified and directed.

Supply and fixing in replacement of fan blades for wall mounted air circulator fan / pedestal fans 450/600 mm sweep any make/model (as per existing sample) complete all as specified and directed.

Material and labour for replacement of incoming twin core of size 23/0.0076 copper flexible wire( not more than 45cm) from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed. Make:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel.

Supply & connecting PVC insulated and overall PVC sheathed and flexible multistranded copper conductor cable 3 core of size 1 sqmm for wall mounted air circulator/ pedestal fan after taking down old one complete all as specified and directed. Make:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel.

Chases cutting in brick/ Stone/ concrete surfaces girth, exe 10 cms and not exe 20 cms for concealed wiring and the like, making the surface good to match the existing in CM 1:3, etc complete all as specified and directed.