REPAIRS TO JOINERY PLUMBING LEAKAGE SEEPAGE OF ROOF CHAJJAS WALLS IN OTM ACCN OF PRTC 106 IN BN 2 PARA SF AND REPAIRS TO SEEPAGE LEAKAGE OF ROOF CHAJJAS WALLS TO OTM ACCN OF PAO PRTC UNDER GE N BLORE

Amount

Taking down shutters of any description not exceeding 1 Sq m complete all as specified and directed

Taking down shutters of any description exceeding 1 Sq m but not exceeding 2 Sq m complete all as specified and directed

Re-securing or easing & adjusting without taking down shutters of any description exceeding 1 sq m but n.exc 2 sq m each complete all as specified and directed

Taking down chowkats (without taking of shutter from the frame) not exceeding 1.5 sq m each including making good the disturbed surface in CM 1:3 all as specified and directed

All as per Item No 4 above, but exceeding 1.50 sq m and not exceeding 4.00 sq m each

Dismantling structural steel work including doors, gates, but excluding framed truss etc. complete all as specified and directed.

Demolition of cement concrete and paving not exceeding 15 cm thick (below or above ground level), removing debris to locations as directed by Engineer-in-Charge, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and removing debris to locations as directed by Engineer-in-Charge, complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Material and labour, for Plain cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in chajjas, coping, padding concrete, etc complete all as specified and directed.

Material and labour for, Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

Material and labour for, Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded pre-laminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing with wood free EPS .

S&F 2nd class hard wood plain, solid, straight chowkats and frames, clean sawn, frame rebated on the solid , rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed

S&F Pressed steel frames for doors of thickness not less than 1.25 mm, of profile 105 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed

S&F Pressed steel frames for doors of thickness not less than 1.25 mm, of profile 125 mm x 60 mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed

S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to match as per drawing fixed to chowkats all as specified and directed

S&F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed

Supply and fix, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with mild steel screw & bolts all as specified and as directed.

Supply and fix in repairs, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with mild steel screw & bolts all as specified and as directed.

Taking down tubular curtain rod, supply and fixing drapery rod, decorative type, made of 25 mm dia stainless steel (wall thickness not less than 0.63 mm), wood finish, colour and pattern as approved by GE, complete all as specified and as directed. (Note : Price shall not be less than 100/- per RM)

Taking down old unserviceable brackets, Supply and fix stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks for curtain rod of 20mm dia, decorative type fixed with steel screws and PVC cleats complete all as specified and as directed.

Supply and fix in repairs, 100mm Aluminium anodized barrel tower bolts of extruded section complete all as specified

Supply and fix Aluminium anodized barrel tower bolts of extruded section of length 150 mm all as specified and as directed.

Supply and fix in repairs, Aluminium anodized barrel tower bolts of extruded section of length 150 mm all as specified and as directed.

Supply and fix Aluminium anodized barrel tower bolts of extruded section of length 200 mm all as specified and as directed.

Supply and fix in repairs, Aluminium anodized barrel tower bolts of extruded section of length 200 mm all as specified and as directed.

Supply and fix Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, sliding door bolt 300 mm all as specified and as directed.

Supply and fix in repairs, Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, sliding door bolt 300 mm all as specified and as directed.

Supply and fix extruded aluminium alloy handles cast type anodized of size 150 mm all as specified and as directed.

Supply and fix in repairs, extruded alloy handles fabricated type anodized of size 100 mm all as specified and as directed.

Supply and fix in repairs, extruded alloy handles fabricated type anodized of size 150 mm all as specified and as directed.

Supply and fix stainless steel, butt hinges 100 mm long, fixed to door frame and shutter, all as specified and as directed.

Supply and fix, butt hinges medium weight cold rolled mild steel of size of hinges 100mm all as specified and as directed.

Supply and fix in repairs, butt hinges medium weight cold rolled mild steel of size of hinges 100mm all as specified and as directed.

Supply and fix in repairs, Hasp and staple safety type of size 100 mm of aluminium anodized all as specified and as directed.

Supply and fix in repairs, 100 mm size Mortice rim lock (4 lever), vertical type, brushed steel suitable for 25 to 40 mm thick doors screwing complete all as specified and as directed.

Supply and fix in repairs, 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.

Supply and fix 150 mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed.

Supply and fix in repairs, 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

Supply and fix in repairs, door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and as directed.

Supply and fix mild steel 300mm, ordinary rat tail rod pattern spring hinges, including roller and roller plate complete

Supply and fix in repairs, Magnetic ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

Material and labour, mild steel framed work such as in doors or gates of angle, or tee sections with gusset plates, rails, braces, etc. completely drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (inclusive of steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete Grade Fe 410 - W (Grade-E- 250) quality-A complete all as specified and as directed.

Running welding to thickness of metal not exceed 6 mm, all as directed by Engineer-in-Charge.

Welding in repairs, not exceeding 2.5 cm in length, and thickness not exceeding 6 mm all as directed by Engineer-in-Charge.

Welding in repairs, length exceeding 2.5 cm and not exceeding 5 cm, and thickness not exceeding 6 mm all as directed by Engineer-in-Charge.

Taking down unserviceable boards as in shelves of cupboards, doors, etc., providing material and labour for 18 / 19 mm thick Pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, alround 6mm thick teak wood fillets fixed in kitchen Cabinet or cupboards all as specified.

Supply and fix in repairs, second class hardwood, plain fillets square, rectangular or triangular in section clean sawn, secured with nails or brads, fixed to cupboard shutter, cross sectional area not exceeding 3 sq cm all as specified and directed.

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type, Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontally) all as specified and directed by Engineer-in-Charge. NOTE:- (i) Payment under this item will be make combined for steel frames, steel shutters 4mm thick sheet glass and stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.18mm and Guard bard / Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wire mesh etc. (ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle, hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

Supply and fix powder Coated aluminium ventilator shutters, fixed type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized complete all as specified and as directed. (Size of ventilator 0.60 m x 0.90 m) Note :- Sheet glass and wire gauge shall be deemed to be included in quoted rate

Supply and fix powder coated 3 TRACK aluminium sliding window with frame and shutters (2 Nos glazed shutters and one No wire mesh shutter), without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, self closing clips, handles, etc., complete all as specified. Note :- Sheet glass and wire gauge shall be deemed to be included in quoted rate

S&F grid suspended false ceiling grid system of size 600x600mm with main runner 29x24.7x0.8mm cross tee 29x24.7x0.8mm and wall angle 22.2x22.2x0.65mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastener, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primer non asbestos fibre cement building board fixed to false ceiling complete including taking down old ceiling of any description .

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips all as specified and as directed.

Material and labour for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq m in each pane all as specified and as directed.

Material and labour for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq m in each pane all as specified and as directed.

Material and labour for 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sq m in each pane all as specified and as directed.

Material and labour for, preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

Material and labour for, preparing new steel surfaces of any description, over 10 cm width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed

Material and labour for, Rolled sections (of Grade Fe-410-W (E-250-Quality A) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

M&L for providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sq m mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sq m. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sq m mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sq m. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions above the treated area. Contd/-- 61.01

Sl Item No 61.00 Contd., (v) Ponding the treated portion at least 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using 40mm graded stone aggregate). Note :- (i) The sunken slab sloped towards outer face so as the drain the water to GI Spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahani trap shall be 10mm below finished floor level. Ensure the drain of pipe dia is larger than the nahani trap size. (iv) The outer end of the spout should be chamfered. v) Mode of measurement shall be plan area of sunken slab.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing up to 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

Demolition of existing roof treatment of any type including cement plaster 15 mm thick and providing screed bed/rendering 10mm thick in CM (1:3) mixed with and including supply of approved water proofing compound as per manufacturers instructions by removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litre/Sq m and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m complete all as specified and directed.

Dismantling Asbestos / Steel corrugated sheet in roof covering / cladding and providing material and labour, Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Dismantling Asbestos / Steel corrugated sheet in roof covering / cladding and providing material and labour, Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding / ridge / valley to wall, fixed with self tapping screws all as specified and as directed.

Material and labour for, 25 mm thick, Plain Cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in floorings, with surfaces, finished even and fair complete all as specified and as directed

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for non-skid Ceramic coloured tiles 8 to 10 mm thick (Grade B-IIA), area of each tile exceeding 0.18 sq m but not exceeding 0.36 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for coloured Glazed ceramic printed tiles, of size 450 x 300 x 7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in epoxy grout to match with the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Material and labour for, rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for, rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only WPC will be measured and paid separately

Supply only water proofing liquid complete all as specified and as directed

Material and labour for, rendering 5 mm thick on ceiling / RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.

Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

Preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc including bedding in cement mortar on to dwarf wall or fixing on granite slab. complete all as specified and directed.

Taking down old sinks and Supply and fixing Stainless steel sink without draining board, made out of 1.00 mm thick sheet for kitchen over all size 495mm x 420mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSB06A of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc in cement mortar on to dwarf wall or fixing on granite slab. complete all as specified and directed.

Taking down unserviceable plate rack, supply and fix new Stainless steel plate rack of 0.63mm thick sheet, size 600mm x 750mm and of weight not less than 4.5kg each complete all as specified and directed. Make: Blue star, Model No. SSKPR-311.or techno-commercially equivalent make specified here-in-after.

Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm excluding chain and plug and porcelain stopper including brackets, supply and fixing of 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with brass waste coupling of 32 mm dia, complete all as specified and as directed. Make : CERA, Cat No S2040103 or techno commercial equivalent in other makes, complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, wash down water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), PVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes and removing debris outside MD land. Make : Cat Part No S1050101 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, including making good to floor removing debris outside MD land, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified here-in-after.

Supply and fix in repairs, PVC valve less, syphonic action type, flushing cistern, Duo Flush cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, including fluch pipe complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)

Supply and fix, vitreous China urinals, half stall type, white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe, waste coupling, etc., complete all as per Make: Cera, cat No. S4020104 of CARYS make or techno commercially equivalent in other makes specified and as directed.

Taking down unserviceable GI tubing, supply and fixing new CPVC pipes, outer dia 20 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe.

All as per Serial Item No 85 here-in-above, but of outer dia 25 mm dia

All as per Serial Item No 85 here-in-above, but of outer dia 32 mm dia

Supply and fix in repairs, Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe, with provision for overhead shower, fixed complete all as specified and directed (Cat No-PIS-75H of Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No PIS-50 H Neptune series of Prayag or equivalent make as specified here-in-after.

Supply and fix in repairs, 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, 15 mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, Bib Cock 2-way double handle with CP flange all as specified and as directed. (Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Chromium plated bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-06H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, Towel rail stainless steel glossy finish 20 mm dia and 600 mm long complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivalent makes fixed in wall as per manufacturers instruction.

Supply and fix in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and fix in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.

Supply and fix in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-47A of Prayag or equivalent make as specified here-in-after) complete all as specified and directed

Supply and fix in repairs Unbreakable corner shelf (3Pcs set i.e., 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified here-in-after) complete all as specified and directed

Supply and fix in repairs peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction

Supply and fix in repairs Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions all as specified and as directed.

Supply and fix in repairs PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

Supply and fix in repairs PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

Supply and fix in repairs, 32 mm dia waste fittings, brass, chromium plated for sinks, basins, etc with long screwed shanks and fly nuts, flange end complete all as specified and as directed

Supply and fix in repairs, 32mm dia, 800mm long PVC corrugated waste pipe complete all as specified and as directed.

Supply and fix in repairs, 40 mm dia, 800mm long PVC corrugated waste pipe complete all as specified and as directed.

Dismantling of unserviceable multi floor trap, supply and fix PVC(SWR) multi floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and as directed

Supply and fix in repairs Health faucet, PVC body, 1.5 m long as per Cat Part No 188 of Prayag or techno commercial equivalent makes specified here-in-after complete all as specified and directed.

Supply and fix in repairs 15mm dia Bib tap (Minimum weight 15mm-120gms), long body, PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs 15mm dia Pillar tap PTMT fancy type (Minimum weight 15mm-120gms), any colour screwed, for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs 15mm dia angle stop valve of PTMT (Minimum weight 15mm-90gms), any colour pressed screwed, for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs, PVC water tank covers suitable for water tanks of capacity 500 / 1000 / 2000 litres complete all as specified and as directed

Supply and fixing in repairs, EWC seat covers, white closed pattern with recessed bottom, including screws and connectors complete all as per Cat Part No B1510101 of CERA Make or equivalent in other makes, removing debris outside MD land, complete all as specified and directed.

Carrying out Petty repairs to arrest leaking of water in bib taps, pillar taps, stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers or any other minor accessories to make the system functional complete all as specified and directed.

Carrying out Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and directed.

Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Disconnecting water tank of capacity up to 500 litres and setting aside for carrying out repairs and re-fixing disconnected tank.

Disconnecting water tank of capacity exc 500 litres and not exceeding 1000 litres, setting aside for carrying out repairs and re-fixing disconnected tank.

Supply and fix in repairs, 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 grams) complete all as specified and as directed.

Supply and fix in repairs, 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 455 grams) complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 25 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Material and labour for spraying anti weed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of plant/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings up to four storey high, complete all as specified and directed by Engineer-in-charge. NOTE:- Contractor has to execute the work of de-generated plant/weeds as per the prior approval and directions of Engineer-in-charge.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, PVC (SWR) pipes 75mm dia, type B (Conforming to IS 13592), single socketed in any length with rubber ring joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

All as per Serial Item No 131 here-in-above, but for 110 mm dia pipe.

Supply and fix in repairs, 75mm dia PVC (SWR) Bends, with access door of any radius .

Supply and fix in repairs, 110 mm dia PVC (SWR) Bends, with access door of any radius .

Supply and fix in repairs, 75mm dia PVC (SWR) junction single (single T) equal or unequal with access door

Supply and fix in repairs, 110 mm dia PVC (SWR) junction single (single T) equal or unequal with access door

Supply and fix in repairs, 75 mm dia PVC(SWR) branch piece, single (single Y) equal or un equal with access door.

Supply and fix in repairs, 110 mm dia PVC(SWR) branch piece, single (single Y) equal or un equal with access door.

Supply and fix in repairs, 75 mm dia PVC (SWR) vent cowl.

Supply and fix in repairs, 110 mm dia PVC (SWR) vent cowl.

S SUDHAKAR