Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹20,770
Closing Date
19 Jan 2026, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
96
1 condition · 1 needing a document upload
i) Tenderer with satisfactory past performance for the tendered or similar item (with same/equivalent drawing/ specification) within last 5 years for minimum 01 number against a single order to any Zonal railway , Railway PUs and Government Organizations shall only be eligible for bulk order. ii) The onus of submission of requisite documents (such as copies of Receipt note for stock items, receipt & acceptance for Non Stock items,Inspection certificate. Receipted Challan copy etc.) along with their e-offer regarding 'Bulk order' lies with the tenderer In case the tender do not submit the requisite documents as detailed above along with their e-offer, the tender will be decided on the basis of their past supply performance in IR , records as available with SECR [if any] iii) In case tenderer participate as an authorized agent, then the performance as required above shall be that of the Principal, authorizing the agent. lt may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal. iv)Authorized Tender to quote with tender Specific authorization directly from OEM otherwise offer will be summarily rejected without any back reference and no representation will be entertained. The OEM's authorization certificate should be on company's letter head and must contain the full name, designation, active e-Mail address & Mobile number of the authorized signatory along with company's stamp. Without these the authorization certificated from OEM will not be considered as valid and offer will be summarily rejected without any back reference and no representation will be entertained
30 conditions · 6 needing a document upload
Make In India Policy :- This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017 along with latest directives, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and Railway Board Letter No 2020/RS(G)/779/2 Pt.1 dated 25.09.2020 & Railway Board Letter No 2015/RS(G)/779/5 (Vol.III) dated 22.06.2020 along with latest amendments.
I). Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. II).The Class I local supplier / Class II local supplier at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for Class I local supplier / Class II local supplier as the case may be. They shall also give details of the location(s) at which the local value addition is made. (III) In cases of procurement for a value in excess of Rs. 10 Crores, the Class I local supplier / Class II local supplier shall be required to provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practising cost accountant or practising chartered accountant (in respect of suppliers other than companies) giving the percentage of local content
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By TPI & tenderer should submit details of place of inspection.
Earnest Money Deposit (EMD): (1) EMD shall be submitted by tenderer as specified in tender schedule, along with their online offer. There shall be no exemption from submission of EMD for any tender or by any tenderer except those exempted. (2) Exemption to submit EMD will be given in the following cases : (a) Micro and Small Enterprises (MSEs) against UDYAM certification. (b) Other Railways and Government Departments. (c) Vendors registered with Railways for the trade group of the item tendered.(d) Vendors appearing on the approved vendor lists of RDSO, subject to approval status being valid on the date of tender closing.
1. Bidder will have to Clearly mentioned the Make/Brand of the offered material in the bid.
SECURITY DEPOSIT (SD) A: 1 . 0 All successful tenderer shall deposit Security Deposit (SD) amount @5% of contract value rounded off to nearest higher Rs.10, subject to maximum Rs. 50 lakh for contract value upto Rs 50 Cr. In case of contract value above Rs 50 Cr. SD will be Rs 1 Cr. 2.0 There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following: i. The Contract value up to Rs.25 (twenty-five) lakh. ii. Other Railways and Government Departments. iii. PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. iv. In tenders issued against PAC, OEM in whose favour PAC has been issued. v.Vendors registered with Railways for the trade group of the item tendered for orders valued up to their monetary limit of registration. vi. Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. 3.0 Security Deposit (SD) shall remain valid for a period of 60 days, beyond the date of completion of all contractual obligations. 4.0 SD from successful tenderer should be received in purchase office within 21 days from the date acceptance letter issued by purchaser. In the event of successful tenderer (s) failing to deposit/submit SD in acceptable form within the prescribed period as aforesaid, the EMD submitted by such successful tenderer shall be automatically adjusted towards SD. In case where available EMD amount is less than required SD and the successful tenderer does not deposit the balance SD amount within stipulated time, then EMD shall be forfeited and case be dealt with as that of withdrawal of offer by the tenderer.
SECURITY DEPOSIT (SD) B: 5.0 Wherever SD has been exempted, for any reason, and the supplier fails to supply goods as per conditions of contract, as amended from time to time, Purchaser shall have right to levy damages from the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to SD amount, as would have been applicable if the contract was with a non-exempted vendor. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly. 6.0 Apart from claiming damages from vendors, in case of failure to comply with the contractual obligations, Railways shall record poor performance of the vendors for taking suitable penal action. 7.0 SD can be submitted in following format: a. DD in the name of PFA/SECR/Raipur b. Fixed Deposit Receipt duly discharged and stamped in favour of PFA/SECR/Bilaspur (Non stock I t e m s ) as the case may be. c.Bank guarantee: In case Bank guarantee is submitted by supplier/ contractor, the same should be in the proper prescribed format for BG as per Annexure available on web site www.ireps.gov.in website link SEC Railway/PCMM. The stamp duty shall be @Rs.5/- per thousand or part thereof for the amount secured for such deed. The title holder of the BG shall be President of India acting through the PFA/SECR/Bilaspur . 8.0 Risk Purchase clauses shall not be applicable.
Road Delivery:- In case of Road delivery, the date of delivery at destination (Consignee end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender.
MSE Clause:- Please indicate whether you are a Micro & Small Enterprises (MSE) with UDYAM certificate. Please also indicate whether the Enterprise is owned by SC/ST or women. Bidder is also required to submit UDYAM Certificate. The 25 % quantity shall be considered for award to MSEs including quantity for women owned MSEs & for SC/ST owned MSEs as per extant rules. The benefit of MSE policy shall only be considered if valid UDYAM certificate. If documents are not uploaded, this benefit will not be given to tenderer. Classification of Enterprise as Micro, Small or Medium Enterprise shall only be considered on the basis of UDYAM Certificate.
LAND BORDER CONDITION (A): Attention of the bidders is drawn to Special conditions regarding restrictions on procurement from a tenderer (bidder) of a country, which shares a land border with India, attached with this tender. Bidders should note that compliance to LAND BORDER CONDITION (B) of this tender schedule is mandatory. Bidders are required to attach evidence of valid registration, if applicable to them. Noncompliance shall result in summary rejection of their offer. Any false declaration and non-compliance of the above would be a ground for immediate termination of the contract and further legal action in accordance with the laws.
LAND BORDER CONDITION (B): "I have read and understood Special conditions regarding restrictions on procurement from a tenderer (bidder) of a country, which shares a land border with India, attached with this tender. I certify that this bidder is not from such a country or, if from such a country, has been registered, with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached.
Training to be imparted to nominated railway staff for operational and maintenance procedure at consignee premises
Warranty Period: Comprehensive warrant for 30 month(s) from the date of commissioning as per attached specification. Warranty terms in attached specification will over write the any warranty terms mentioned at any other place.
1 location across Chhattisgarh · 2 Numbers total
Hydraulic insulator testing jig with digital display
96255822~CR
96255822
Open - Indigenous
Goods
Chhattisgarh
₹0
₹20,770
19 Jan 2026
22 Dec 2025
1 item · 2 Numbers total
Supply and commissioning of Fully automatic computerised single wagon test rig (SWTR) SC ADA based for freight stock to carry out all the test parameters as per RDSO Wagon maintenance manual a nd attached copy of specifications (Annexure-A). Warranty period will be 30 months from the date of succe ssful commissioning. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/C&W/MXA, SECR | Chhattisgarh | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5561156.pdf
ATTACHMENT
5637894.pdf
ATTACHMENT
5259808.pdf
ATTACHMENT
5259807.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .