Electrical Maintenance to Kallahalli Electrical Crematorium in ward no 108 Under POW 2024-25.

Electrical Maintenance to Kallahalli Electrical Crematorium in ward no 108 Under POW 2024-25.

Supply of Air Freshner cakes

Supply of Room Refreshner

Supply of Urinal cakes

Supplying & fixing of Coil Holding Refractory Bricks suitable for vertical coil insertion system electrical crematorium furnace conforms to IS-2042. The bulk density of the brick will be max of 2.20gm...

Supplying & fixing of Insulation Refractory Standard Bricks suitable for crematorium furnace having the bulk density of max of 0.6 fm/cm2 and maximum working temparature of 1300 deg C. The size of bri...

Supplying & fixing Body Laying With 70% aluminium Moulded Refractory Bricks (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS...

Supplying of refractory cement fine ACC50 (25 kg/bag) for casting refractory bricks

Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

Supplying of Acoustic Set Thermotex Liquid Blinder suitable for casting refractory bricks. 40 kgs bucket

Supplying & fixing of 3.5KW Heating coils made out of 5.8mm thick APM wire, heating Zone should be 950mm length, End terminal rod SS 304 grade 10mm dia 550mm length suitable for vertical mounting syst...

Providing servicing, repairing and overhauling of existing body charging trolley complete.

Servicing & cleaning of Scrubber, Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 monts once)

Furnace main door servicing include of bearing replacement 2 no’s and door lifting chain replacement

Supply & erection of 2 wire Temperature controller range 0 to 1200.c of size 99 x 99 MM,

Providing door lifting machanism set for manually operating made out of by 2 bearings 30mm dia and 50mm dia bore shaft and 40 * 40 * 100mm shifting block with handle and mounting bracket.

Supply & erection of 22211CK bearing (for exhaust motor)

Supply & erection of 311H sleeve (adopter)

Supply & erection of B-58 belt

AMC charges for 1 year for 180 KVA to 250 KVA D.G set inludung replacement of Engine oil, filter kit, Radiator coolant and checking battery, B Check complete.,

Work of servicing, leak arresting and oil filtration upto 400 KVA power transformers as specified below: a. Removing cable connection of transformer after isolating the supply dismantling the cable ...

EHV Grade Transformer Oil - New 601400

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 100 A

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 125 A

Supplying, installation, testing & commissioning of 12Volts..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment an...

Providing 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Disc...

Supplying and fixing HRC fuse link on existing switch fuse base with watt loss as per IS-13703. Up to 63Amps

Supplying and fixing HRC fuse link on existing switch fuse base with watt loss as per IS-13703 Above 63 Amps to 200 Amps

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP capacities.

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 70 Sqmm,...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 400 A

Providing and supplying of Plastic bucket of 25 ltr and mug of 1.5 Ltr Capacity in sets as per direction of engineer incharge of work

Coconut Broom Stick

Supplying of Hand gloves. (PWD Civil 2018-19)

Housekeeping work using the following Cleaning materials. a) phenol

c) Bleaching powder

d) Dust Clothes/ wipping clothes

e) Squeezer/wiper