8196 PROVN OF BAGGAGE ROOM AT ASI SPECIAL REPAIRS TO BLDG NO ET 24 AND ET 25 AT HQ 3 SIGNAL GROUP AND PROVN OF PAVED AREA NEAR BLDG NO T 5 AT 13 FD SUB GROUP UNDER GE CENTRAL PUNE

Amount

Demolition of Cement concrete in ground floor or paving n.exc 15 cm thickness (below or above ground level) and removing from site complete all as directed

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.(Roof Kerbs) and removing rubbish off the premises complete all as directed.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles and removing from site of work complete all as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water and removing rubbish off the premises complete all as directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering and removing from site complete all as directed

Dismantling ceiling boards of AC sheets or any description and of any thickness including cover fillets etc and removing from site complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50 Sqm and not. exc. 4Sqm. each and removing from site complete all as directed.

All as per item No 7 here-in-before not exc 1.5 sqm area each.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as directed.

Taking up or down steel tubing 15 mm bore & connections and cleaning for re using in the work or removing from site complete all as directed.

All as per item No 10 here-in-before but 20 mm bore

Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal framesand removing from site complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 20 cm deep and getting out in hard / dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/ dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m complete all as specified & directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil exc 1.50 km but n exc 5.0 km and depositing outside of MOD land complete all as specified and directed.

M & L for hard core of broken boulder or stones gauge n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface under floor, plinth protection etc complete all as specified and directed.

M & L for moorum/ red bajri filling in floors or pavings, laid in layers n exc 15cm thick spread leveled and rammed including watering etc complete all as specified and directed.

M & L for cement concrete 1:4:8 type D2 (using 40mm graded aggregates) in foundation, filling and mass concrete complete all as specified and directed.

M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed.

M & L for cement concrete 1:3:6 type C2 (40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete.

M & L PCC 1:2:4 type B1 using 20mm graded stone aggregates in kerb stone / roof kerb includig sharp or chamfered angles all as specified and as directed.

M & L for reinforced cement concrete Design mix M-25 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and directed.

All as per item No 25 here-in-before but for columns, pillars, piers, posts and struts etc.

All as per item No 25 here-in-before but for slabs supported on walls, landings and like etc complete.

All as per item No 25 here-in-before but for chajjas complete.

All as per item No 25 here-in-before but for roof beams and lintels complete.

M & L for 40mm thick damp proof course to hrizonatal or vertical surfaces in cement concrete (1:2:4) type BO with using liquid WPC as per manufacturer's instruction including necessary formwork complete all as specified and directed note: WPC shall be measured and paid separately.

M & L for cutting holes in brick walls exc half brick thick but n exc one brick thick built in cement mortar for inserting hold fasts and making good dismantled portion in cemnt mortar (1:3) complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces of footing and plinth beams complete all as specified and directed.

All as per item No 33 here-in-before but suspended slabs such as roof slabs, floor slabs and landing and similar works complete.

All as per item No 33 here-in-before but pillars, posts, struts, piers, columns and stanchions etc complete.

All as per item No 33 here-in-before but roof beams, lintels and soffits of roof projections etc and similar items including edges.

All as per item No 33 here-in-before but chajjas including edges complete all as specifed and directed.

All as per item No 33 here-in-before but rough finished surface to edges of concrete flat, surfaces of edges of window cills, concrete railings, and similar work n.exc 20 cm wide complete.

S & F 35mm thick plain framed, panelled shutter made of 2nd class HW with (two panels) of timber flat on both sides (feather edged) or of veneered paricle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F 35mm thick glazed and skelton shutters made of 2nd class hardwood open rebated and prepared to receive glass, gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauge etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with MS square tube, complete all as specified and directed.

S & F factory made Solid PVC Moulded door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F butt hinges 100mm long, mild steel, medium weight cold rolled complete all as specified and directed.

S & F mild steel barrel tower bolt of 200mm long all as specified and directed.

S & F 150 mm long mild steel handle pressed type complete all as specified and directed.

S & F mild steel sliding door bolt plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

All as per item No 48 here-in-before but 8 to 10mm dia as in stirrups spacers and binders complete.

S & F posts and struts in fencing with angle iron of size65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F mild steel screw bolts 5 to 10mm dia (machine made) with hesagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed (Note: weight of fencing shall be ascertained through BOO)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F mild steel as in flat iron fillets for securing chain link fencing complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild stee wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

S & F MS framed work such as grill grating, framed guard bars, barred iron doors,ladders, frame work for securing water tank, and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel work as in hold fast and similar small articles confirming to Fe 290 Gde E-165 complete all as specified and directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and PCC(1:3:6) type C1 filling in inner core of frame complete all as specified and directed.

All as per item No 59 here-in-before but 105 x 60mm.

S & F steel window double shutter with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded all as specified and directed.

S&Fin repair powder coated three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

M & L for 12mm thick gypsum board for ceiling on aluminium powder coated grid of size 60cm x 60cm with using 36.5 mm x 23.5mm x 1.5mm thick maintee, 23.5mm x 23.5mm x 1.28mm crosstee and 25 x 25 x 1.5mmangles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nut for securing frame to ceiling suspended @1200mm c/c both ways, size of grid shall be 610mm x 610mm and finishing the surface with 2 coats of oil bound distemper complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No 64 here-in-before but plain steel sheet as in ridges.

M & L water proofing treatment to RCC roof slab, walls, chhajjas ets, which shall be carried out as specified below and as directed by Engineer-in-Charge including taking down old waterproofing tratement. (a) M&L for 10mm thick plaster in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bitumnous primer @ 0.70kg/Sqm of area complete all as specified. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.60 kg/Sqm and 3mm thick with 10cm overlap bothways as specified & joints sealed and applied complete by torch application method and carrying out test by flooding with water for 24 hrs for leakage & seepages to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as per manufacturer's instruction and as directed by Engr in Charge.

M & L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in subbase of floor complete all as specified and directed.

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth profection/ path, finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for coloured non-skid cramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all specified and directed.

M & L for coloured glazed ceramic tiles of size 300x200 x 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M & L for 20 to 25mm thick machine cut Kota stone flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing all as specified over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No 71 here-in-before but in riser of steps, skirting , dados and pillar laid over and including 15mm thick rendering in cement mortar 1:4 and jointed complete all as specified and directed.

M & L for granite (of any type) tiles 20mm thick, machine cut beded and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of granite including grinding and polishing over and including 15mm thick screed bed in cm(1:6) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finish of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade laid in floors/ pavement laid with grey cement and no pigment over and including 30mm thick sand filling complete all as specified and directed.

M & L for 10mm thick rendering in CM 1:6 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall complete all as specified and directed.

All as per item no 75 here-in-before but 15mm thcik in cm(1:6) on stone masonry surface.

All as per item No 75 here-in-before but 15mm thick in CM 1:4 in two layers, 5mm thick in cm(1:4) and mixed with liquid wpc as per manufacturer's instruction over a coat of 10mm thick in cm (1:4) for external wall surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately.

All as per item No 75 here-in-before but 5mm thick in CM 1:3 as in ceiling complete.

Supply only liquid type water proofing compound.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of acrylic washable distemper of approved tint and pattern over a coat of primer on wall complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of acrylic washable distemper distemper over 2mm thick wall care putty on walls complete all as specified and directed.

M & L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm width or girth complete all as specified and directed.

M & L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old steel surfaces and applying one coat of syntnetic enamel paint complete all as specified directed.

S & F GI tubing medium grade 15 mm bore with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.

S & F GI tubing medium grade 20 mm bore with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S & F rotational moulded polythylene water storage tank 1000 ltr capacity triple layered (Cylinderical vertical with closed top) with tank nipple and including 20mm bore brass ball valve and hoisted and fixed in position complete all as specified and directed.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan ( pedestal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including plastic water closet, seat white closed pattern with flat bottom, cover and mild steel hinging device complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts, complete all as specified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15mm bore stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repairs flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete all as specified and directed.

S&F in repairs PVC waste pipe for WHB, urinals & sink flexible type of suitable dia complete all as specified and directed.

S & F in repairs gratings 100 mm dia of stainless steel complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose with or without swivel joints, fixing to steel pipe or union complete all as specified and directed.

S & F in repair health faucet with 8mm dia 1.2 metre long flexible tubes and wall hook complete all as per Cat No. ALD-573 of make jaquar or equivalent model of specified make from make list.

S & F in repair CP toilet paper holder as per CAT No. CAN-1151 N of make- Jaquar or equivalent model of specified make from make list.

S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ ceiling rose/ light fittings, etc. and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / DBs of any type / capacity / description as existing at site including MCBs/ MCCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down ceiling fan of any sweep keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, over hauling the fan complete including spray, painting with one coating of synthetic enamelled paint including filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through PVC Casing & Capping on wall /roof along with suitable fittings, with ISI marked PVC modular boxes complete with cover plate and frame of suitable size for mounting modular switches/sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :-

One light/fan point controlled by one, one way switch

One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board

All as per Item No. 113 here-in-above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly concealed in wall /roof/ floor along with suitable fittings with MS sunken boxes of 1.6 mm thick, of suitable size including 3mm thick laminated backelite sheet ISI marked for housing switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor alongwith wiring and connecting to the common earth dolly all as specified for the following :

One light/fan point controlled by one, one way switch

One 3 pin 5 A socket outlet point controlled by one No one way switch on same board

One 3pin 5 A socket outlet point controlled by one No one way switch on independent board

All as per Item No.115 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Switch piano, flush type single pole, one way 5 A all as specified and directed.

S & F for Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified and directed.

S & F modular switch 16A SP one - way 230V white ivory finish complete all as specified and directed.

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S & F for ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and directed.

S & F electronic fan regulator modular type as reqd complete all as specified and directed.

S & F for MCB DB SPN sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and directed.

Supply and fix LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant model from the specified make given in PS.

S & F LED light fittings 2'x2', 28 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and directed Make :- Make Havells Cat part No. PLUTONEO2X2PLR28WLED857S 28 W or its equivalent model from the specified makegiven in PS.

S & F bulkhead luminaries including LED bulb 10W Make Bajaj Cat part No 112334 BIBWP 10W LED or Equivalant model from the specified makegiven in PS.

M & L for Sub main wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic 20 mm PVC rigid conduits ISI marked and its accessories on wall/ roof / floor including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/ main board complete all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of PVC conduit shall constitute one unit length.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed.

M & L for Reinforced concrete pipes of dia 100 mm 2 nos half round (for bottom and top ) and excavated area shall be levelled all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core , from DB/Panel to sub DB/ main board complete all as specified and as directed.

Narendra N Bhandare

L.T Associate

Sanjay Glass