Providing masonry partition wall, vitrified tile flooring, MS doors, upvc sliding windows and Electrical works at PCBT Department, CSIR-CFTRI, Mysuru

Amount

PARTA: Civil Work

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling and re-fixing of existing aluminium partition including Glass/ Novapean sheet etc. as per instruction of Engineer-in-charge. (Labour charges only)

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and fixing precast cement concrete solid block of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) -2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 M sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm (Labour charges only) (Vitrified floor tiles only supplied by the Department)

Laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Labour charges only) (Vitrified floor tiles only supplied by the Department)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Make: Leticrete, Asian Paints or FOSROCK

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 M sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section fixed with or without connecting plate including cutting, hositing, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including necessary bending, welding and bolted with special shaped washers etc. complete. as per direction of Engineer-in-charge. Hot finished welded type tubes

Providing and fixing Single Leaf Door (Clean Room Doors): Single leaf Door fit into the wall. Shutter sheet thickness will be 0.8mm and frame will be 1.2mm thick made up of GPSP GI sheet with epoxy polyester powder coating. Leaf thickness will be 44mm and infill will be PUF with density 40±2 Kg/m33. Door bottom seal shall be provided. Single Leaf Door Accessories: 03 No. SS Roll bearing Hinges, 01 No. Door Closer, 01 No. SS D Handle Back-to-back, 01 No. Double glazed view panel of 450*600 mm with 5 mm thick toughened glass, 01 No. Drop Seal, 01 No. Lock and 01 No. Kick plate Door Size: 910 x 2100 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including scaffolding at all heights

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content,including scaffolding at all heights With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre MAKE: asian or its equivalent

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic ompound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour,including scaffolding at all heights Two coats Recommended brand: asian/NEROLAC

Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 & R2 profiles and 2.10 mm for series R3 and R4 profiles conforming to EN: 12608 in any shape colour and design duly reinforced with galvanized mild steel section made of required shape and size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sas adaptor (where ever required) of appropriage dimension, EPDM gasket, hardware SS 304 grade fasteners of Minimum 8mm dia with counter sunk head, comprixing of matching polyamide PA6 grade sleeve for fixing frame to finished wall as pr IS1367: PART 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duty sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specificaton and direction of Engineer-in-charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately. Note: Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed >45 m/ sec as per IS875 - part3 (ii) sits with structure height morethan 20m for all wind speeds Two and half track three panels sliding window with two glazed and one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS304 body Using R3 series with frames (85mm and above) x (40mm & above) and glazed sash (30mm & above) x (55mm & above) and fly screen sash (20mm & above) x (50mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with Multi-point locking system (Height upto 1.8 metre) Make: LG / NCK VEKA/ Komarling

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (Plain) MAKE: SAINT GOBIAN OR MODI

Providing and fixing 9mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. MAKE: NOVAPAN

Providing and fixing 220mm long tubular SS handle

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Make: Godrej

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make: Godrej or its equivalent

Providing and fixing SS wire guage (Grade - 304) fly proof mesh (or mosquito mesh) of thickness 0.5 mm dia to 0.63 mm dia of average width of aperture 1.4 mm or less (as decided by the engineer incharge) in Wooden/Aluminium/UPVC window shutters with necessary screws, fittings etc.,

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm C.P. brass pillar tap Make : Cera or Hindwdare or Parryware

Providing and laying 18mm thick lapothra granite stone slab in steps over 20mm thick base jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing, nosing etc. all complete as specified and as directed by the Engineer-in-Charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.

PARTA: Electrical Work

Supplying and fixing of 4way (4+12) double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Make : LEGRAND / L&T / SCHNEIDER / ABB. Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker.

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB (for item no. 1) complete with connections, testing and commissioning etc. as required. a) Double Pole.

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB (for item no. 1) complete with connections, testing and commissioning etc. as required. b) Four Pole.

Supplying and fixing 63 A rating, 240/415 V, 4Pole, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB (for item no. 1) complete with connections, testing and commissioning etc. as required. MCB Make : Legrand / L&T / ABB.

Supply of 9 Inch Dia, 250 / 300mm sweep, industrial type, heavy duty ready to use Exhaust Fan having Bird Cage with 1.5 FRLS PVC insulated, copper conductor, single core cable and to fix with required size of MS frame duly painted with one coat of primer and 2 coats of paint, suitable hardwares etc.,. Exhaust Fan . Make : ATOMBERG / USHA / KHAITHAN / BAJAJ / CROMPTON.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep.

Supplying, Installation, Testing & Successful Commissioning of 20 Watts 4 Feet LED Batten Light (Day Cool) complete with internal wiring and with any standard make rated 2 core copper wire of 0.5 metre length, ready to use suitable to fix on wall / ceiling and to work with 230V Single Phase, 50Hz AC Supply. The end wire from the fitting shall be terminated to a 2 Way 5Amps PVC Connector / Ceiling rose. Light fitting make : PHILIPS / CROMPTON / BAJAJ / WIPRO / USHA.

Dismantling & taking down Old light Fittings / related wirings, hardwares etc., after carefully disconnecting the incoming electrical input and insulating the same, depositing all the old materials in an organised manner to the Auction / Electrical Section Store Yard or as per the advise of the Electrical Officer In-Charge of the Project without any damage. For every Toilet it is the responsibility of the contractor to disconnect the incoming supply, insulate the same while caring Civil works . After the complition with new electriacl equipment reconnecting , however engineer in charge will advise for the source of power supply

Labour charges for digging upto 8 feet of depth below ground level, including hard soil, rocks, cement surface etc.,if any encountered, fixing the Item No:20, refilling of soil etc., as required. (along with charcoal / coke and salt from S.No:22 as required, already estimated under S.No.22).

Supplying and fixing 6 Module (200mmX75mm) modules, GI / PVC box along with modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 15/16 A modular DP switch with indicator on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Modular Switch make : Anchor - Roma / GM / Legrand.

Supplying and fixing 20 A rating, 240/415 V, 10 kA, "C" curve, compact type / mini MCB (to be fix in 6 modular box) miniature circuit breaker suitable for inductive load of following poles in the existing modular box (for item no. 9 & 10) complete with connections, testing and commissioning etc. as required. MCB Make : Legrand / L&T / ABB. a) Double Pole.

Group A Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Group B Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (concealed) as required. 2 x 1.5 Sqmm+ 1 x 1.5 sqmm. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (concealed) as required. 2 x 2.5 Sq.mm. + 1 x 2.5 Sq.mm. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (concealed) as required. 2 x 4.0 Sq.mm. + 1 x 4.0 Sq.mm. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (concealed) as required. 2 x 6 Sq.mm. + 1 x 6.0 Sq.mm. PVC FRLS Copper wire make : Finolex / Kothari / Polycab / BCH / V-Guard.

Supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required. Modular Switch and Socket Make : Anchor-Roma / GM / LEGRAND. i) 5/6 amps switch

Supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required. Modular Switch and Socket Make : Anchor-Roma / GM / LEGRAND. ii) 3 pin 5/6 A socket outlet

Supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required. Modular Switch and Socket Make : Anchor-Roma / GM / LEGRAND. iii) 5 Pin, 15/16 A Socket outlet.

Supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required. Modular Switch and Socket Make : Anchor-Roma / GM / LEGRAND. iv) 15/16 A Switch.

Supplying and fixing 3 Module, GI box along with modular base & cover plate for modular switches.

Supplying and fixing 4 Module, GI box along with modular base & cover plate for modular switches and compatible single Pole MCB in recess etc. as required..

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissionin etc. as required. Make : Legrand / Indo-Asian / L&T / ABB / Schneider.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerence as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Ceiling Fan Make : Atomberg / Crompton / Bajaj / Usha.

Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet; 50Kg of charcoal / coke and 50 Kg of sea salt for each earthpit; 2 runs of 25mm x 3 or 5mm G.I Strip from plate until funnel tightned with 2 Sets of SS nut, bolts and washers on the plate; 2 Sets of clamp on the GI Pipe and finally terminated on the top of the pipe.

Providing and fixing 25mm x 5mm G.I strip on surface or in recess for connections as required.

K N CONSTRUCTIONS (BID ID -917121)