GE(S)/M-52/2022-23

Amount

Taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries out of MoD land complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for formwork to sides of pillars, struts columns etc concrete fair finished surfaces complete all as specified and directed.

M&L for Reinforced cement concrete M-25 nominal mix (using 20mm graded aggregates) in columns etc complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT bars but 5mm and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, ground masonry, etc. and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring to receive pavers complete all as specified and directed.

Dismantling wrough iron or mild steel work any type complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, forged into spikes; framed guared bars; barred iron doors; ladders; framed balusters; walk ways; railing; framed work of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link fencing any size mesh, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc 15 cm thick( below or above ground level) complete including removal of debries from the site n. exc. 50m from starting point etc complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, floor etc complete all as specified and directed.

M&L for 60mm thick, M-35 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for except 60mm thick, M-35 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 80mm thickness, M-40 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for except 80mm thickness, M-40 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L brick work with flyash bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

All as per srl item No 25.00 above but (EXCEPT BRICKS) complete all as specified and directed.

M&L for precast designer coloured Endura tiles with glossy finish (factory made rectified) of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complete all as specified and directed.

M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth without using extra cement including glass dividing strips as per site requirement complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in surface channel and drains complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for Rendering 15 mm thick rendering on brick surfaces in CM 1:4 finished even and smooth without using extra complete all as specified and directed.

M&L for Rendering 15 mm thick rendering on other than faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old plastered surface after complete removal of existing treatment making the surface smooth and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old plastered surface after complete removal of existing treatment making the surface smooth and applying one coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash,at any height complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick and 600m width of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

M&L False ceiling of 8 to 9mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or colour) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams, above 4m but n. exc. 8m length clear span complete all as specified and directed.

S&F tubular framed steel trusses made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

M&L for Rendering 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coats of oil emulsion distemper, complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick in single piece flooring and like set and jointed inneat cement slurry including pointing in epoxy grout to match marble shade, including taking down existing damage stone floor over and including 15mm thick screed in CM 1:4 . complete all as specified and directed.

M&L for 8 to 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile of size 1200mmx600mm (Joint free) as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 and finished rough, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for 20mm thick cement plaster in CM 1:4 on brick work or concrete surface of sunken floor finished even and smooth without using WPC liquid as per manufacturer's instructions @ 0.200 ltr in 50 Kg of cement complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but not exc 4.00 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description not exc 1.0 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and removing from site, complete all as specified and directed.

S&F in repair powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle (2no.) complete all as specified and directed.

S&F in repair powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F in repair powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 30 mm thick single piece factory made single piece wire gauge door shutter solid PVC UV printed doors wood free consisting of 5mm thick solid PVC sheet on both side ( both side multi colour UV printed) using stee/ aluminium XPM wire mesh and consisting frame made out of MS tubes of 19 guage thickness and size of 19mm x 19mm for stiles and 19mm x 19mm for the top, bottom and lock railswith PVC beading in all around MS frame shall have a coat of metal primers. MS frame shall be covered with heat moulded (Rigid) MS frame welding sealed to the style and with suitable PVC sheet beading and jointed together with solvent complete as per direcrtion of Engr-in-Charge and as per manufacturers specification and drawing. Note :- The shutter is to be fixed with 50mm size self drilling star screw full threaded.

S&F 35mm thick 2nd class hardwood factory made plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 35mm thick wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. without sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth etc, sizes of members of shutters as specified in SSR Part-1, Section 8, Clause 8.24(a), supplied and fitted to chowkats, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Solid PVC door frame wooden high density filament (HDF) double rebated of size 50mmx95mm processed with polymer fins and different wood fibre, fixed to opening including necessary lugs/hinges, lock strike plate etc complete all as specified and directed.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-026/13 sheet 1/5 to 5/5 dated 11.09.2013.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.

M&L for preparation of old steel surfaces exceeding 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces exceeding 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed.

Repair to steel rolling shutters of any size for smooth working condition including grasing, replacement of parts if required, necessary welding and painting complete all as specified and directed.

S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F 400 mmx500 mm cabinet mirror "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.

S&F steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified.

S&F steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified.

S&F Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.

S&F Stop valve (ISI Marked) 15 mm bore fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

Supply & Fixed in repair Bib tap 15 mm bore Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F "as in repair" Vitreous china wash basin, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F in repair , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S & F, Brass CP jet spray with complete assembly suitable for EWC pedestal pattern including PVC flexible pipecomplete all as specified and as directed.

S&F "as in repair" health foucet (with 1.5mtr long PVC tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.

S&F "as in repair" Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F "as in repair" Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouth of circulating pipes without disconnecting the water tanks of capacity exc 250 ltr but n.exc 500 ltr complete all as specified and directed.

S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M/S TARA CHAND CONSTRUCTION CO.

M/S CANTILEVER ENGINEERS

M/S NARESH KUMAR SHARMA

jagdish sons

Bidder Name

jagdish sons

M/S CANTILEVER ENGINEERS

M/s Ashoka Brothers

M/S TARA CHAND CONSTRUCTION CO.

M/S NARESH KUMAR SHARMA