C.O Additional accommodation of Sr. Sec. School at Chakti in Teshil Nankhari Distt. Shimla

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Cement mortar including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows, ventilators etc. (steel or wood) shutter including chowkhats, architrave, holdfasts and other attachments etc. complete and stacking within 20 metres lead : Exceeding 3 sqm in area including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo- Mechanically Treated bars of grade Fe-415 D or more including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Suspended floors, roofs. Landings. Balconies and access platform including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Half brick masonry in common burnt clay building bricks in : Cement mortar 1:3 First Class Bricks including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

15mm Cement Plaster on rough side of single or half brick wall of mix : 1:6 (1 Cement: 6 coarse sand) including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smoth complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approval brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing tha surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Deodar wood including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in?charg. 35 mm thick shutters including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

roviding and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Second class teak wood including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr /10 sqm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berret type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 100x 10 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

150x10 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodiazed colour and shade with bolts and nuts screws etc. complete (i) 250x 16 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 100 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

125 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 0.60mm (Zero point sixty millimeter) thick pre-painted steel sheet of TATA/DUROSHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twnty) micron over 5 (Five) microns primer coating including fixing with pre-painted iron J or l hooks, bolts and nuts, 6mm diameter with prepainted limpet and rubber washers complete with all accessories as required including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves/facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 100 mm diameter including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing P.V.C. Bend 87.5° 110 mm bend including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making food the wall and floors etc. including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460 mm bowl depth 200 including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing two hole basin mixing Faucet including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing CP stop cock of approved quality and colour. 20 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC connection pipes 30/45 cm long (i) 20mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C. P grating round 10 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

P/F P.V.C. waste pipe flexible including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

P/F C. P brass bib tap including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing G.I. Elbow 15mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brachets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brachets, cutting and making good the walls wherever require including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete : Size 600x600 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

HITESH THAKUR