REPAIR AND RECANNING OF ALL TYPE OF CHAIRS UNDER GE (WEST) LUCKNOW

Amount

CHAIR EASY: Drg No- FD-229 (for item no. 1 to 6) Opening of joints and removing of front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished to achieve glossy finish new and old surface of chair complete all as specified and shown on drawing.

All as per item No 1 but rear legs.

All as per item No 1 but side frame/ front frame.

All as per item No 1 but arms.

Taking out old unserviceable cane from chair easy and S&F new cane weaving with 1st quility white cane 2mm half round shape and 0.6 mm thick as per Godrej pattern complete all as specified and shown on drawing. Make of cane:- Shah & Shah/ Premier/ MPI (Maharastra Polymer Industry).

Preparation of surface with sand paper after scrubbing and french polishing to chair easy including to the parts repaired/replaced under item No 1 to 4 to the required glossy finish to match the existing complete all as specified and shown on drg.

CHAIR WRITING: Drg No- FD-280 (for item no. 7 to 14) Opening of joints and removing of old cane and front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified and shown on drawing.

All as per item no. 7 but rear leg.

All as per item no. 7 but stiffner.

All as per item no. 7 but side/ front/ back rail.

All as per item no. 7 but back support.

All as per item no. 7 but arm.

Taking out old unserviceable cane and S&F new cane weaving with 1st quility white cane 2mm half round shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern compelete all as specified and shown on drawing. Make of cane:- Shah & Shah/ Premier/ MPI (Maharastra Polymer Industry.

Preparation of surface with sand paper after scrubbing and French polish of chair writing to achieve glossy finish and including the parts repaired/replaced under item No 7 to 12 to match the existing complete all as specified and shown on drg.

CHAIR DINING: Drg No- FD/MAP-II/05, FD16 & FD-279 (for item no. 15 to 23) Opening of joints and removing of old cane and front leg and S&F new front leg (left/right) made out of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified and shown on drawing.

All as per item no. 15 but rear leg.

All as per item no. 15 but stiffner.

All as per item no. 15 but side rail.

All as per item no. 15 but back support.

Taking out old unserviceable 4mm thick PVC Seat and S&F new 4mm thick PVC seat with holes screwed with rails complete all as specified and shown on drawing. Make of PVC seat: AMKO/ CONFRO.

S&F new stiffner of size 16"x1"x1" should be fixed bottom of PVC Seat for support made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new surface of chair complete all as specified and shown on drawing.

Taking out old unserviceable cane and S&F new cane weaving with 1st quality white cane 2mm half round shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern complete all as specified and shown on drawing. Make of cane:- Shah & Shah/ Premier/ MPI (Maharastra Polymer Industry

Preparation of surface with sand paper after scrubbing and French polish of chair dining to achieve glossy finish and including the parts repaired/replaced under item No 15 to 21 to match the existing complete all as specified and shown on drg.

CHAIR STEEL CB OFFICE WITH ARM AND WITHOUT ARM, CHAIR STEEL TUBULAR WITH ARMS AND WITHOUT ARM: DRG No. FD-75M (for Item No 24 to 31) M&L welding (Gas/Elect) in repair of tubular leg, with fine finishing and standard workmanship complete all as specified and shown on drawing.

Taking out U/S seat and S&F new seat stiffner made of 25x6 mm flat iron and 450 to 500mm long including required two holes for screw before 40mm at each end complete all as specified and shown on drawing.

Taking out U/S stiffener and S&F new stiffner of mild steel round bars 10mm dia and 450 mm long welded between the legs with fine finishing and standard workmanship and duly painted with two coat of Olive Green paint over a coat of red oxide primer complete all as specified and shown on drawing.

All as per item No 26 but 500 mm long.

Taking out U/S seat and back fram chair CB steel and S&F new seat and back fram made out of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish and weaving shall be done with platic cane not less than 0.35mm thick as shown on drg. Make of cane:- Shah & Shah/ Premier/ MPI (Maharastra Polymer Industry)

Taking down u/s plastic cap from tubular pipe and S&F new plastic cap of approved quality complete all as specified and shown on drawing.

Taking down old unserviceable arms rest and S&F new arm rest made of teak wood duly black polished complete all as specified and shown on drawing.

M & L for applying two coats of olive green synthetic enamel paint over a coat of red oxide primer of chair tubular steel with and w/o arms complete all as specified and shown on drawing.

CHAIR VERANDAH: DRG No. FD-256 & FD/MAP/12 (for Item No 32 to 37) M&L for cutting U/S cane and welding (Gas /Elect) of frame, 10 mm round bar , legs where as required to make its actual shape and size complete all as specified and shown on drawing.

Taking out old U/S rusted leg and S&F new leg made out of conduit pipe 19mm dia 1.6mm thick and 1.35 m duly painted with two coat of enamel paint (white) over a coat of red oxide primer complete all as specified and shown on drawing.

M & L for preparation of old steel surfaces of chair verandah with sand paper and painting with two coat of synthetic enamel paint (White) complete all as specified and shown on drawing. Make: Berger/ Asian/ Shalimar.

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia complete all as specified and shown on drawing.

Taking out old unserviceable PVC Seat and back and S&F new PVC Seat & back 4mm thick with weight not less than 1.85 Kgs and grooves 90x10 No on seat & back complete all as specified and shown on drawing. Make of PVC Seat & Back- Amko/ Confo.

Cutting/taking out old unserviceable cane from chair Verandah and S&F and recanning of chair with white plastic cane (Oval shape) 2 mm wide and canning border with 4mm wide cane as per the Godrej pattern complete all as specified and as shown on drg. Make of cane:- Shah&Shah/ Premier/ MPI.

M/S Pramod Chandra Jain

M/S CHANDER SHEKHAR

m/s tripurari enterprises

Shivam Enterprises