NIT NO. 65/Durg(Kawardha)/2026

N.I.T. Schedule for Construction of High School Building Jhalmala, Block-Kawardha, Distt-Kabirdham (Chhattisgarh)

Building S.O.R. 2015 & Amd. Up to 30.12.2024 P.A.C. Rs. 69.80 Lacs

Portalid Tender no Line Item No Page no Srno ItemId ConfigId Sub Division Code Discription Quantity Unit Rate Amount AmountIn Words

pwd.cgeprocurement.gov.in 1 1 1 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 1234 Sqm 7.2

pwd.cgeprocurement.gov.in 1 1 2 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 396.98 Cum 185

pwd.cgeprocurement.gov.in 1 1 3 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 65.34 Cum 26.5

pwd.cgeprocurement.gov.in 1 1 4 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 46.68 Cum 65

pwd.cgeprocurement.gov.in 1 1 5 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 657.86 Cum 371

pwd.cgeprocurement.gov.in 1 1 6 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 88.03 Cum 2970

pwd.cgeprocurement.gov.in 1 2 7 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 296.53 Cum 4163

pwd.cgeprocurement.gov.in 1 2 8 3.1.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: P.L. to G.F. Slab 93.18 Cum 97.5

pwd.cgeprocurement.gov.in 1 2 9 3.1.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: G.F. Slab to F.F. Slab 93.25 Cum 195

pwd.cgeprocurement.gov.in 1 2 10 3.1.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: F.F. Slab to Terrace Slab 10.79 Cum 292.5

pwd.cgeprocurement.gov.in 1 2 11 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 32618.3 Kg 54.5

pwd.cgeprocurement.gov.in 1 2 12 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 545.69 sqm 139

pwd.cgeprocurement.gov.in 1 2 13 2.1.3 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Window sills, anchor blocks, string course, bends, copings, bed plates and like. 18.37 sqm 184

pwd.cgeprocurement.gov.in 1 3 14 2.1.8 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Beams, lintels, cantilevers & walls 543.95 sqm 202

pwd.cgeprocurement.gov.in 1 3 15 2.1.13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 60.79 sqm 294

pwd.cgeprocurement.gov.in 1 3 16 2.1.5 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Columns, Pillars, Piers and likes- rectangular or square in shape 526.35 sqm 297

pwd.cgeprocurement.gov.in 1 3 17 2.1.15 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Stair cases of all types excluding spiral and folded plate type, including risers and landings 39.32 sqm 230

pwd.cgeprocurement.gov.in 1 3 18 2.1.7 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 791.72 sqm 235

pwd.cgeprocurement.gov.in 1 3 19 2.1.4 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Edge of slab, breaks in floor and walls upto 200mm. 261.3 meter 34

pwd.cgeprocurement.gov.in 1 4 20 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 28.77 cum 3263

pwd.cgeprocurement.gov.in 1 4 21 7.5.4+7.6 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor 80.8 cum

pwd.cgeprocurement.gov.in 1 4 22 7.5.4+7.6 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: First Floor 81.07 cum

pwd.cgeprocurement.gov.in 1 4 23 7.5.4+7.6 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Second floor 23.23 cum

pwd.cgeprocurement.gov.in 1 5 24 7.11.2+7.12 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor 28.55 sqm

pwd.cgeprocurement.gov.in 1 5 25 7.11.2+7.12 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: First Floor 27.12 sqm

pwd.cgeprocurement.gov.in 1 5 26 7.2 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. Ground Floor 28.55 sqm 62.5

pwd.cgeprocurement.gov.in 1 5 27 7.2 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. First Floor 27.12 sqm 62.5

pwd.cgeprocurement.gov.in 1 6 28 9.18.3 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer. Single rebate/ mullion 100mmx50mm size, 1.25mm thick sheet. 151.2 meter 391

pwd.cgeprocurement.gov.in 1 6 29 8.13.2 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 67.29 sqm 1370

pwd.cgeprocurement.gov.in 1 6 30 8.15 Extra for double leaf shutter instead of single leaf. 28.8 sqm 52

pwd.cgeprocurement.gov.in 1 6 31 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 829.8 kg 75

pwd.cgeprocurement.gov.in 1 7 32 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 1137 Kg 73.5

pwd.cgeprocurement.gov.in 1 7 33 8.132.2 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 125x2.5mm (heavy) 28 each 76.5

pwd.cgeprocurement.gov.in 1 7 34 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm 28 each 238

pwd.cgeprocurement.gov.in 1 7 35 8.138.1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 300mm 28 each 92.5

pwd.cgeprocurement.gov.in 1 7 36 8.139.1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm 28 each 97

pwd.cgeprocurement.gov.in 1 7 37 8.140.1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 150 mm 88 each 24.5

pwd.cgeprocurement.gov.in 1 7 38 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 2178 kg 67.5

pwd.cgeprocurement.gov.in 1 8 39 9.35.1 Providing and fixing approved pipe hand rail by welding to iron railing including applying a priming coat of red oxide zinc chromate primer. M.S Pipe 150.96 Kg 80.5

pwd.cgeprocurement.gov.in 1 8 40 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 15.84 sqm 3330

pwd.cgeprocurement.gov.in 1 8 41 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 920.84 sqm 87

pwd.cgeprocurement.gov.in 1 8 42 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 1694 sqm 91.5

pwd.cgeprocurement.gov.in 1 8 43 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 1416.4 sqm 107

pwd.cgeprocurement.gov.in 1 8 44 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 614.4 sqm 254

pwd.cgeprocurement.gov.in 1 8 45 12.79.1 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFED floor tiles with water absorpation less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complet. Size 600x600mm thickness 9 to 10mm 103.6 Sqm 1082

pwd.cgeprocurement.gov.in 1 9 46 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades over 20mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mexed with matching pigment complete. Size 300x300mm thickness 7 to 8mm 28.27 Sqm 779

pwd.cgeprocurement.gov.in 1 9 47 12.3.1 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 40 mm thick 16 sqm 222

pwd.cgeprocurement.gov.in 1 9 48 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 221.28 sqm 587

pwd.cgeprocurement.gov.in 1 9 49 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 45.72 sqm 692

pwd.cgeprocurement.gov.in 1 9 50 Amend. 14.57 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @4.0 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty, Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work (This Item to be use in heigher grade painting works Item No. 14.65) 201.6 sqm 95

pwd.cgeprocurement.gov.in 1 10 51 Amend. 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @1.25 lit/10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion, Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze, Opus 130/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tackles and labour complete for the work (With 2 Year warranty) 2556.4 sqm 74

pwd.cgeprocurement.gov.in 1 10 52 Amend. 14.67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian Ace, Dulux Promise Exterior Berger Wall Masta, Nerolac Suraksha Plus Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty) 1474.84 sqm 70

pwd.cgeprocurement.gov.in 1 10 53 Amend. 14.72 Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @0.75 lit 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel Dulux Promise Premium Enamel Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 367.14 sqm 120

pwd.cgeprocurement.gov.in 1 11 54 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 4 each 2899

pwd.cgeprocurement.gov.in 1 11 55 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 3 each 2882

pwd.cgeprocurement.gov.in 1 11 56 18.17.2 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required White Size 550x400 mm 5 each 1408

pwd.cgeprocurement.gov.in 1 11 57 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm 6 each 1529

pwd.cgeprocurement.gov.in 1 11 58 18.19.1 Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. White 5 each 1130

pwd.cgeprocurement.gov.in 1 11 59 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. 6 each 2014

pwd.cgeprocurement.gov.in 1 12 60 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 48 meter 182

pwd.cgeprocurement.gov.in 1 12 61 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 110 mm dia pipe. 180 meter 267

pwd.cgeprocurement.gov.in 1 12 62 18.77.1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 60 each 154

pwd.cgeprocurement.gov.in 1 12 63 18.77.2.2 Double "Y" with or without door 110 mm 7 each 224

pwd.cgeprocurement.gov.in 1 12 64 18.77.3.2 Vent covel 110 mm 3 each 44

pwd.cgeprocurement.gov.in 1 12 65 18.77.6 Nahani trap 110x75mm 15 each 90.5

pwd.cgeprocurement.gov.in 1 12 66 19.8.3 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore 85 meter 297

pwd.cgeprocurement.gov.in 1 13 67 19.9.1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia nominal bore 50 meter 131

pwd.cgeprocurement.gov.in 1 13 68 19.9.3 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 25 mm dia nominal bore 65 meter 222

pwd.cgeprocurement.gov.in 1 13 69 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 10 each 85

pwd.cgeprocurement.gov.in 1 13 70 19.11.3 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 25 mm nominal bore 20 each 117

pwd.cgeprocurement.gov.in 1 13 71 19.13.3 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Stop cock (350 grams) 2 each 237

pwd.cgeprocurement.gov.in 1 13 72 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 21 each 382

pwd.cgeprocurement.gov.in 1 13 73 19.14.2 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Long nose bib cock (500 grams) 5 each 455

pwd.cgeprocurement.gov.in 1 13 74 19.14.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Soap dish plate 5 each 163

pwd.cgeprocurement.gov.in 1 13 75 19.14.16 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Towel rail (600mm long x 20mm dia) 1 each 338

pwd.cgeprocurement.gov.in 1 13 76 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 15 each 51

pwd.cgeprocurement.gov.in 1 14 77 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6 each 436

pwd.cgeprocurement.gov.in 1 14 78 19.17.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore 2 each 432

pwd.cgeprocurement.gov.in 1 14 79 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 2500 litre 7.3

pwd.cgeprocurement.gov.in 1 14 80 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 5 each 754

pwd.cgeprocurement.gov.in 1 14 81 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3 each 4133

pwd.cgeprocurement.gov.in 1 15 82 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 2 each 1709

pwd.cgeprocurement.gov.in 1 15 83 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) 1 point 1502

pwd.cgeprocurement.gov.in 1 15 84 21.1.1.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. 16 meter 339

pwd.cgeprocurement.gov.in 1 15 85 21.1.2.3 Rocky strata including Boulders. 150 mm dia. 60 meter 396

pwd.cgeprocurement.gov.in 1 15 86 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia 18 meter 1304

pwd.cgeprocurement.gov.in 1 16 87 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia 1 each 217

pwd.cgeprocurement.gov.in 1 16 88 19.7.5 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 40 mm dia. nominal bore 30 meter 364