NIT NO-08 ITEM NO-04

S/o submersible pump set fitted with dynamically balanced SS impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on three phase AC, 415 volts ,50Hz, 10 HP, Model No J156, Head-46-65-73 Mtrs, Discharge-600-450-350 LPM.MAKE:BS/KSB/Crompton/DJB APPROVED

Supplyof Automation LT Panel board suitable for 415 V, 3 Phase, 50 Hz, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 ,, for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX1360 mmX300 mm and having (1) 63 Amp changeover -1 No (2) 63 A TPN MCB -1No (3) Amp.meter 0-50 A -1 No (4) Voltmeter 1 No (5) Amp. & Volt meter selector switches 1 set (6) Auto Manual + Light+Control MCB TP 32 Amp-1 No.each (7) CT--3 Nos (8) Push button +ON/OFF light-2 Nos each (9) 5 KVAR Shunt Capacitor-1 No (10) Aluminium Bus bar size 25 mmX6mm- 1set (11) 15 HP Star Delta starter (a) 32 Amp Power Contactor-3 Nos (b) overload relay 14-23 A-1 No (C) Star Delta Timer -1 No (d) QT Timer -24 Hours -1 No (e) Motor Protection Relay flush mounting with display with thermal O/L, Short circuit,earth Fault, Phase loss, unbalance, Phase reversal, locked rotor protection Make :- L&T/Protech-1 No Make of Accessories/components as per DJB approved Make of Panels:- L&T/C&S/BCH/Protech/DJB Approved

Supply-Of G.I. Pipe 50mm dia, Medium-class, each of 3m±3'' Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. HSN CODE:- 7308

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells HSN CODE:-8544

Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal / TATA. HSN CODE:- 7307

Supply-Of G.I. Bend 90o x 50 mm dia, having Flange at both-ends. HSN CODE:- 7307

Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality. HSN CODE:-7318

Supply-Of Rubber-packing for 50mm dia Flange. HSN CODE:-4008

Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. HSN CODE:- 7307

Installation of submersible pump set with pipe and other accessories, Connection of cable, installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and laying of GI pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipment on No load and full load conditions as per standard and full satisfaction of engineer-in- charge. This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.