Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.9 LAdmitted-Finance | +20.00% | ₹8.9 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RANDHIR SINGH L1 |
|---|---|---|---|---|
| 1.00 | SITC of Antyesthi Yantra with following specification (A) Body MS. Sheet size 3mm & 2mm angle structure 50*50*5mm MS (B) Lining Fire bRick alumina 70% with ceramicsboard thickness 50 mm capacity 1260 C. (C) White heat Castable (k) and accost (50) for fire bricks feting (D)Angle 65*65*10 & 35*5 SS 304 grade (E) Rod 30 mm 370 mm SS 304 grade (F)Pipe OD 40mm thickness 5mm SS 304 grade (G) Ceramic Blanket (64D)total bolts & nut MS/SS (H) Thermostat Size 20mm OD 450 mm length (I)Control Panel auto and Manual Both (J) Blower complete wiith fan size 305 mm with air controlled system (K) Motor 1 HP rpm 1440 ( L) Chimni Length 3 meter size 350x350mm taper sheet thikness 3 mm with ceramic board lining. (M) Ceramics board fitting 50 mm and 25 mm (N) Both side SS door with lock size - 600 x 550 mm thickness 4 mm SS 304 grade 50 mm ceramic board and ceramic blanket 1 set (O) Sliding Trolly alignment bed angle size 50x50mm +35x35mm + strip. length 4.5 meter Rpe size 75x75mm, 40x40mm & round 40mm ceramic board & ceramic blanket lining. (P) Sliding Trolly cover 1750 x 1 180 x 440 mta sheet size 3 ouo with bearing roller Pipe size 7sx75 mm, 40x40mm & round 40 mm ceramic board & ceramic blanket lining. (Q)Sliding Asthiya & Ash collecting Trey 22 Size 2200 x 350 x 110 mm sheet thickness 3 mm with roller SS 304 grade (R) Coated with heat resistance paint with capacity of 600 degree silver color mm with air controlled system (S) Two step fabricated checker plate and angle size 6'*2*1' qty 2 including | 1 | set | 6,30,000 ₹6,30,000 Lowest |
| 2.00 | SITC of inverter with battries with -o/p voltage-220 V, o/p current 12 amp AC Nominal, I/P current 12 amp AC max, O/p power- 2kva, Power factor-0.8, frequency -50 Hz including 12 V 150 Ah Battrey Rack and Battrey bank comprising SMF/VRLA battries, inter connection wiring etc as requirred complete in all respect | 1 | Each | 45,000 ₹45,000 Lowest |
Tender Value
₹8.5 L
EMD Value
₹17,080
Closing Date
14 Aug 2026, 12:00 pmClosed
Commissioner
Municipal Council Deeg
installation of Closed Combustion Cremation Furnace Under Budget Declaration 2026-27
2026_DLB_585874_1
Enit 13 CCCF
Open Tender
Civil Works
Percentage
15 days
deeg
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
commissioner
₹17,080
Yes
18 Aug 2026
11 Aug 2026
14 Aug 2026
11 Aug 2026
14 Aug 2026
11 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20
mm nominal size). | 4 | CUM | 5,910 | ₹23,640 |
| 2 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel
primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² | 70 | SQM | 1,241 | ₹86,870 |
| 3 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | 600 | KG | 114.5 | ₹68,700 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
BOQ_1040814.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .