REPAIR / MAINTENANCE OF LT OVERHEAD LINE, UG CABLE AND CONTROL PANEL AND OTHER MISC E/M CONNECTED WORKS IN DOMESTIC AREA AT 7 AF HOSPITAL UNDER GE (AF) E/M CHAKERI, KANPUR

Amount

Excavation in trenches n.exc. 1.5m wide and n.exc.1.5m in depth for laying of UG Cable including getting out complete all as specified & directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm complete all as specified & directed.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc 1.5 m above starting point complete all as specified & directed.

M&L for spreading & leveling dry clean Ganga sand in trenches for cushioning UG cable complete all as specified and directed.

M&L for sub class old size of Brick in trenches for cable protection of LT Cables complete all as specified and directed.

M&L for boring through existing road with trench less method for passing of UG cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 240 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 120 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 95 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 70 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 50 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

Supply and replacement of unserviceable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 35 sq mm 3.5 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable complete all as specified and directed.

S&F in trenches / fixed on pole / wall GI pipe of 80 mm dia light grade, IS-1239 marked with required size of flat iron clamp duly painted with two coats of super enamal paint over a coat of red oxide primer complete with bolts, nuts and washers of suitable size complete all as specified and directed.

S&F in trenches / fixed on pole / wall GI pipe of 50 mm dia light grade, IS-1239 marked with required size of flat iron clamp duly painted with two coats of super enamal paint over a coat of red oxide primer complete with bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, Joinging , commissioning and testing Heat Shrinkable end termination joint out door type and suitable for cable of size 120 to 185 sqmm 3 core complete with all fittings and jointing materials suitable for HT11 KV ( E ) XLPE cable complete all as specified and directed.

Supply, Joinging , commissioning and testing Heat Shrinkable straight though joint out door type and suitable for cable of size 120 to 185 sqmm 3 core complete with all fittings and jointing materials suitable for HT11 KV ( E ) XLPE cable complete all as specified and directed.

Supply, Joinging, commissioning and testing Heat Shrinkable end termination joint out door type and suitable for cable of size 240 to 300 sq mm 3 core complete with all fittings and jointing materials suitable for HT11 KV ( E ) XLPE cable complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x60cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 25x4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 Mix type B reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 32x6mm protection etc complete all as specified and directed.

M&L for Lightning arrestor non lineor resistor type conforming to IS, complete line discharge class -3 nominal discharge current 10 KA and high discharge with stand 100 KA assembly suitable for 33 KV and mounted on existing structure including replacement all clamp nutsbolts and washer etc complete all as specified and directed

M&L for danger notice plate of 1.6 mm thick mild steel sheet vitreous enameled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for HT system of size 25x20 mm complete all as specified and directed

M&L for replacement of old rubber insulating mat of size 2Mx1MX25 MM Thick for HT equiment ISI Marked complete all as specified and direceted.

S&F in replacement insulator pin type porcelain vitreous white brown or green including galvanized MS spindle two GI Washers and one GI Nut 150 mm height 150 mm dia for 11000 volts grade complete all as specified and directed .

S&F disc type insulator porcelain vitreous white brown or green including 145mm high and 255 mm dia ball & socket type single disc assemblpy for 11000 volts grade complete all as specified & directed.

M&L for applying one coat of superior quality enameled aluminium paint on all exposed surface on steel tubular poles (HT Poles) cross arms including all associated fitting after necessary surface preparation of old painted surface complete including marking space for numbering by good quality black paint on steel surface of size 150x100 mm at 1.5 Mtr from thick white paint including providing 3 Nos strips of air force blue colour all as directed. Note : All the required T & P items like ladders, safety belts and helmets etc shall be deemed in the quoted rates complete all as specified and directed.

M&L for replacement of triple pole switch air break gang operated vertical type with GOD mechanically mounted on twelve (12 nos) insulatorswith do fuse and steel frame complete suitable for operation from ground level suitable for 11 KV HT of cap 400 Amps including removing handle GOD, handle locking arrangement and lock complete with two nos keys complete all as specified and directed.

M&L for replacement heat shrinkable type straight through joint suitable for cable of size 25 to 50 Sqmm, 3.5 Core, 1100 Volts grade coomplete all as specified and directed.

M&L for replacement heat shrinkable type straight through joint suitable for cable of size 70 to 150 Sqmm, 3.5 Core, 1100 Volts grade coomplete all as specified and directed.

M&L for replacement heat shrinkable type straight through joint suitable for cable of size 185 to 240 Sqmm, 3.5 Core, 1100 Volts grade coomplete all as specified and directed.

Disconnecting cable connection of LT panel /Feeder Pillor Box of any size and capacity cleaning thoroughly with vaccum cleaner and CRC and shifting care fully to new location , making cable connection for incoming and out going cables along with required cable glands and lugs and foundation work at new location complete all as specified and directed.

S&F in replacement of PVC insulated heavy duty electric weather proof flat twin core cable with aluminium conductor 1100 Volts grade, cross sectional area 4 Sqmm complete all as specified and directed.

S&F in replacement of initial charging battery 12 volts, 180 AH including filling with necessary electrolyte solution complete all as specified & directed.

S&F in replacement on load change over switch, 800 Amps, 4 pole with sheet metal enclosure, panel mounted type with fixing arragement in existing wall angle iron frame 50x50x4mm with welding work and PCC works etc including making electrical connections complete all as specified and directed. Make : C&S/L&T/Havells

S&F in replacement on load change over switch, 400 Amps, 4 pole with sheet metal enclosure, panel mounted type with fixing arragement in existing wall angle iron frame 50x50x4mm with welding work and PCC works etc including making electrical connections complete all as specified and directed. Make: C&S /L&T/Havells

M&L for replacement of Air circuit breaker (ACB) of capacity 800 Amps 4 pole with breaking capacity 50 kA with thermal magnetic release (Mannual drawout type) complete all as specified and directed. Make : Indo Asian/L&T/Schineder/C&S/ABB

M&L for replacement of MCCB, 4 pole adjustable type 50 KA, 630 Amps complete all as specified and directed. Make : Indo Asian /L&T/Havells

M & L for replacement of MCCB, 4 pole adjustable type 36 KA, 500 Amps complete all as specified and directed. Make : Indo Asian /L&T/Havells.

M&L for replacement of MCCB, 4 pole adjustable type 36 KA, 250 Amps complete all as specified and directed. Make : Indo Asian /L&T/Havells.

M&L for replacement of MCCB, 4 pole adjustable type 36 KA, 160 Amps complete all as specified and directed. Make : Indo Asian /L&T/Havells.

S&F in replacement sheet metal enclosure suitable for fixing 4 pole MCCB of any capacity mounted type with fixing arragement in existing wall / angle iron frame incl welding work etc including making electrical connections complete all as specified and directed.

SAKSHAM SUPPLIERS BUILDERS

Lalta Prasad vijay kumar Forwarding Agency

S B ENTERPRISES

BHATIA ENTERPRISES

Preetpowercontrol