Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹25 L
EMD Value
₹2.5 L
Closing Date
26 Nov 2026, 12:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
O/F EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD BAS
O/F EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD BAS
LOK NIRMAN VIBHAG KE SWAMITWA ME VIBHIN ODR MARGO PAR SADAK SURAKSHA KA KARYA
2026_CEUBZ_1209426_1
5330/A-2 DATED-27-10-2026
Open Tender
Civil Works
Percentage
60 days
BASTI
AS PER MBD
2 documents required · 2 mandatory
₹944
Yes
₹2.5 L
O/F EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD BAS
17 Nov 2026
17 Nov 2026
26 Nov 2026
17 Nov 2026
26 Nov 2026
17 Nov 2026
17 Nov 2026 - 26 Nov 2026
19 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying bituminous concrete (Grade-II) thickness 25 mm with higher capacity batch type hot mix plant capacity 120 HMP using crushed aggregates of specified grading, premixed with bituminous VG-30 binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling smooth wheeled, vibratory with and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete With Design Job Mix Approved By Competent Authority complete in all Aspects. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) | 4.87 | cum | 16,959 | ₹82,522.49 |
| 2 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. as per Technical Specification Complete in all aspects or as per direction of E/I. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) | 2,259 | sqm | 529 | ₹11,95,011 |
| 3 | Providing and fixing retroreflective Sign with a corrosion resistance 4 mm thick aluminium composite panel face to be fully covered with high intensity primastic sheeting type IV as per IRC-67:2010 rectro reflective sheeting with MS angle frame of 35x3 as per Technical Specification Complete in all aspects or as per direction of E/I. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) (Dalla Quarry) STOP Sign board | 41 | Nos. | 5,066 | ₹2,07,706 |
| 4 | Rumble Strip Sign Board | 43 | Nos. | 4,063 | ₹1,74,709 |
| 5 | Max. SPEED LIMIT Sign board | 49 | Nos. | 3,265 | ₹1,59,985 |
| 6 | Hazard Marker | 77 | Nos. | 3,221 | ₹2,48,017 |
| 7 | Road Delinator -Providing and fixing of Standard Metal Delineator as per IRC 79-2019 consisting of minimum retro reflective unit exposed area of 330 square cm in while color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. As per MORTH 805 )8.15. Complete in all aspects or as per direction of E/I.(Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) (Dalla Quarry) | 100 | sqm | 787 | ₹78,700 |
| 8 | Reflective Raised Pavement Markers (Cat Eye/ Road Stud) - Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Read Stud sna bej moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-imeact Polystyrene) or Acryforinte Butadien Styrene (ABS) cr Any other sutable material approved by the Engineer. The Marker cha support a load of 13,535 kg tested in accordance with ASTM D4280. The Reflective paneis shall conse of number of lenses corratning single or dual prismatic cubes capable of proving total internal reflection of the light entring the lens face. Lenses shall be moved of methyl mebrewrylate conforming to ASTM D783 of equivalent. The stop or retro-reflecting surface shalt preferably be 35+1-5 degree lo hace and the area of each retro-reflecting surface shall not be less than 13.00 sqm the marker height she not be less than 10 mm and shall not exceed 20 mm & oad markers in case the markers are Displaced. damaged, get worn out or lose their reflectivity compared to slipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own ccs: The rate shall include af materials, labour, T&P, transportation, installation and incidentals Complete in all aspects or as per direction of E/I. As per MORTH 804 )8.35. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) | 220 | Nos. | 493 | ₹1,08,460 |
| 9 | Tree Plate S/F Reflective tree Plate having Size 15 Cm x 15 Cr over 1.5 mm thick aluminium sheet including labour completion of the work. IRC 32:212 Complete in all aspects or as per direction of E/I. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) (Dalla Quarry) | 1,731 | Nos. | 95 | ₹1,64,445 |
| 10 | Retro-reflectorised Traffic sign as par IRC-67-2012- Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :87-1 2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over shiminium sheeting 1.5 to cm below ground level as per approved drawing. The Retro refective sheating shall be tested for a means of property designed foundation with M 15 grade cement concreto 45 cm x 45 cm x 60 cm, 60 certificate of having the sheeing tested for coefficient of retro reflection, daytime colour and luminance. shrinkage, flexiblity, liner removal, adhesion, impact resistance, specular glass and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International: Government Laboratory Institute by the manufacturer of the sheeting and in case hin certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad Alternatively, a certificate conforming to ASTM Spastication (D 4955-09) on artificial accelerated weathering requirements from a reputed aboratory in India can be accepted provisionally. In such a situation, the Employer / Clent, If so desires. could sook for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012. Legends, telters numerals and borders etc should be as per MORTH specification No-80137 Proof of the same in form of government report shall be uploaded while qualing tender. Complete in all aspects or as per direction of E/I. (Rates are excluding G.S.T. but including of all other taxes labour cess, material, labour and T&P etc.) (v) 60 min x 45 mm rectangular with diffinitation plate (20cm x 60cm). | 20 | Nos. | 3,582 | ₹71,640 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.77 MB
Tendernotice_2.pdf
PDF • 1.36 MB
BOQ_2296178.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .