SPECIAL REPAIR TO RAFIYA MANZIL UNDER GE (NW) KUNJALI COLABA MUMBAI

Amount

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even & smooth without using extra cement completed all as specified.

Material and labour for rendering 10 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement completed all as specified.

Material and labour for filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper complete all as specified and directed by Engineer-in- Charge. .

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material and labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed Eniineer-in-Charge.

Material and labour for preparation of old decorated surfaces of ceilingl and applying one coat of oil emulsion distemper complete all as specified and as directed Eniineer-in-Charge.

Material and labour for complete removal of existing treatment including washing, rubbing down and stopping of oldpainted wall surfaces and applying two coats of Plastic emulsion paint interior grade over a coat of self primer complete all as specified and as directed Engr-in-Charge.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of Plastic emulsion paint interior grade complete all as specified and as directed Eniineer-in-Charge.

Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable fixed to 15 mm dia stop cock with 1.25 metre long flexible tube and ABS wall hook fixed in position including making connections complete all as specified and as directed Engr-in-Charge.

Supply and fixing in repair under counter wash hand basin vitreous china of size 605mm x 430mm x 200mm oval shape meticulously crafted from high quality materials with seamless finish white fixing with fastner/ bracket including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as manufacturers instructions and as directed Engr-in-Charge.

Supply and fixing in repair table top thin rim wash hand basin vitreous china of size 495mm x 395mm x 150mm rectangular shape meticulously crafted from high quality materials with seamless finish white fixing including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as manufacturers instructions and as directed Engr-in-Charge.

Supply and fixing in repairs stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed Engr-in-Charge.

Supply and fixing in repairs 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish with carcass as in cupboards, drawers including 3mm thick 1st class hard wood (Teak) cover fillets to all exposed faces of the board and applying two coats of French polish to fillets and fixed with screws complete all as specified and as directed Engr-in-Charge.

Supply and fixing in repairs 12 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish with carcass as in cupboards, drawers including 3mm thick 1st class hard wood (Teak) cover fillets to all exposed faces of the board and applying two coats of French polish to fillets and fixed with screws complete all as specified and as directed Engr-in-Charge.

Supply and fixing stainless steel soft close hinges 16cm x 12cm door mount 110 degree full overlay - o crank optimum strength bright polished fixed to cup board shutters complete all as specified.

Supply and fixing Stainless Steel cabinet/ door/drawer handle decorative type as approved of size not less than 100mm fixed with CP screws complete all as specified.

Supply and fixing Stainless Steel Magnetic door catcher for drawer, cupboards fixed with CP screws complete all as specified.

Supply and fixing Stainless steel locks suitable for cupboards, drawers fixed with CP screws complete all as specified.

Supply and fixing in repairs Stainless steel wire baskets made out of SS 304 grade with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish complete all as specified.

Supply and fixing in repairs Stainless steel multipurpose baskets made out of SS 304 grade with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement, front and side covering with 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish complete all as specified.

Supply and fixing in repairs Stainless steel cutlery unit,cup and saucer unit baskets made out of SS 304 grade with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement,front and side covering with 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish complete all as specified.

Supply and fixing in repairs Stainless steel thali basket made out of SS 304 grade with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement,front and side covering with 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish complete all as specified.

Supply and fixing in repairs Stainless steel undersink basket made out of SS 304 grade with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement, front and side covering with 18 mm thick prelaminated marine plywood prelaminated both sides with acrylic finish complete all as specified.

Supply and fixing in repairs kitchen plate rack made of stainless steel 304 grade of size 910mm x 1220mm X 0.25mm including fixing to wall as per manufacturers instructions and directed by Engineer-in-Charge.

Supply and fixing in repairs kitchen plate rack made of stainless steel 304 grade of size 910mm x 910mm X 0.25mm including fixing to wall as per manufacturers instructions and directed by Engineer-in-Charge.

Supply and fixing in repairs 15 mm dia Pillar taps cast copper alloy fancy type CP with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified.

Supply and fixing 15 mm bore bib tap, cast copper alloy chromium plated fancy type with long shank and crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified.

Supply and fixing 15 mm bore angular stop cock cast copper alloy, chromium plated, fancy type with long shank screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or union complete all as specified.

Supply and fixing in repairs Stainless steel towel ring round with round flange fancy type complete all as specified.

Supply and fixing in repairs Stainless steel single towel rail 600mm long fancy type.

Supply and fixing in repairs Stainless steel swivel towel holder twin type fancy type complete all as specified..

Supply and fixing in repairs Stainless steel swivel towel rack 600 mm long without lower hangers but with 3 hooks fancy type complete all as specified.

Supply and fixing in repairs Stainless steel toilet roll holder fancy type complete all as specified.

Supply and fixing in repairs Stainless steel soap dish holder fancy type complete all as specified.

Supply and fixing coner glass shelf with bracket fancy type complete all as specified.

Material and labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C including dismantling old unserviceable false ceiling, complete all as specified and directed.

Supply and fixing in repairs 8mm thick factory made calcium silicate hilux board made from siliceous and calcareous materials reinforced with cellulose fibers fixed with screws to timber frame work complete all as specified.

Material and labour for preparing new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified.

Supply and fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed Engr-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like laid over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed Engr-in-Charge.

Material and labour for rounding to edges of stone slabs on edge fixed as in steps, cooking platform and making grooves for lining complete all as specified and as directed Engr-in-Charge.

Material and labour for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding / backing coat and removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed Engr-in-Charge.

Material and labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick as on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM 1:3 set and jointed in neat cement paste and pointed in white or coloured cement to match complete all as specified and as directed Engr-in-Charge.

Material and labour for light shade double charged virified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed Engr-in-Charge.

Material and labour light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm as on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM 1:3 set and jointed in neat cement paste and pointed in white or coloured cement to match complete all as specified and as directed Engr-in-Charge.

Supplying, fitting and fixing 12mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately,wherever required complete all specified and directed by Engr-in-Charge.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltrs per sqm of the vertical surface of the sub- stsructure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1 : 2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution ) @ 0.5 ltr/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed by Engr-in- Charge

Taking down shutters of any description not exc1 sqm each complete all as specified and directed by Engr-in- Charge

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engr-in- Charge

Supply and fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed..

Supply and fixing 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats complete all as specified.

Material & Labour for preparing new wood and wood based surfaces of any description, width or girth and applying two coats of french polish over a coat of wood filler complete all as specified and directed by Engr-in-Charge.

Supply and fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc .5 sqm in each panecomplete all as specified.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified.

Supply and fixing aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

Supply and fixing 100mm size Stainless steel butt hinges medium weight with SS hinhe pin and bright finished complete all as specified and directed by Engr-in- Charge

Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed by Engr-in- Charge

Supply and fixing 150 mm size aluminium alloy handles, febricated type extruded section complete all as specified and directed by Engr-in- Charge

Supply and fixing 75mm size Stainless steel butt hinges medium weight with SS hinhe pin and bright finished complete all as specified and directed by Engr-in- Charge

Supply and fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engr-in- Charge

Supply and fixing Plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device complete all as specified.

Supply and fixing in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets and making good to disturbed surfaces as per existing complete all as specified.

Material and labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including PVC casing caping of 25mm wide with all accessories and terminated in and including PVC modular box with modular cover plate and frame of sutable size for mounting switches, sockets, regulators etc. including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for the following :- NOTE: a) Colour coding shall be as :- i) Phase - Red/Blue/Yellow ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit and quoted rate includes the same.

One light point controlled by one 5A switch

One Ceiling Fan controlled by one 5A switch

One Exhaust Fan controlled by one 5A switch

One 5A flush type switch socket on same board board

One 5A flush type switch socket on independent board

Material and labour for point wiring with 2.5 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in in and including PVC modular box of sutable size including 2.5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for mounting 15A switch socket on the independent board complete all as specified and directed. Note: (a) Colour coding shall be as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green

Material and labour for point wiring with 4 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in in and including PVC modular box of sutable size including 4 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for mounting 02 Nos 6A sockets and 01 No 15A socket complete all as specified and directed. Note: (a) Colour coding shall be as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green

Supply and fixing Modular switch 1 way 6 Amps, 1 module complete all as specified.

Supply and fixing Modular switch 1 way 16 Amps, 1 module complete all as specified.

Supply and fixing Modular Socket, 6 Amps 2/3 pin combined 2 module, complete all as specified.

Supply and fixing modular socket 6/16A,2/3 pin, combined 2 module complete all as specified .

Supply and fixing for modular fan step regulator, 120W - 2 modular complete all as specified.

Supply and fixing in repairs hanger clamp assembly with 15mm bore ERW conduit heavy weight down rod up to 3 feet for hanging of ceiling fan with nuts,bolts,washers, rubber wheel, hanger clamp & split pin complete all as specified and as directed Engr-in-Charge.

Taking down carefully ceiling fans of any make of sweep 1200mm and opening the motor, dismantling parts and Overhauling of ceiling fan after properly cleaning/removing old existing grease , oil, cleaning dust, rust and applying new oil, grease, varnishing of winding and applying two coats of white synthetic enamel paint over a coat of red oxide zinc chrome primer assembling the dismantled parts and refixing at same position complete all as specified and as directed Engr-in-Charge.

Taking down carefully exhaust fan of any make and sweep , opening the motor, dismantling parts and Overhauling of exhaust fan after properly cleaning/removing old existing grease , oil, cleaning dust, rust and applying new oil, grease, varnishing of winding and applying two coats of white synthetic enamel paint over a coat of red oxide zinc chrome primer assembling the dismantled parts and refixing at same position complete all as specified and as directed Engr-in-Charge.

Supply and fixing in repair new generation ultraslim LED panel recessed down light Luminaire 18 watt of size 600mm x 600mm including driver, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for modular/POP/Gypsum ceiling complete all as specified and as directed Engr-in-Charge..

Supply and fixing in repair double door type SPN DB 12 Way, 240V with 100 A copper busbar for each phase , double door type IK 09, IP 54 protection suitable for housing MCB's all as specified and directed by EIC. Note : MCB DBs shall be concealed in wall including making good the disturbed surface to match with surrounding.

Supply and fixing in repair modular power socket 25 Amps, 2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate and frame complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP 6-32 Amps,10KA, 'B' curve complete all as specified.

Supply and fixing MCB SPN 63 Amps,10KA , 'B' curve complete all as specified.

Supply and fixing 20mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixed on wall, ceiling, roof etc.with fixing accessories such as couplers, lock nuts, saddles, pipe hooks and connecting to AC condenced water drain pipe complete all as specified.

Material and labour for sub-main wiring with 2 runs of 4.0 sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade) 1100 volts grade for phase , drawn in and including heavy grade PVC casing caping not less than 25mm wide (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required including one run of 4.0 sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade) 1100 volts grade as earth dolly/mains including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location as per existing complete all as specified and directed. Note: (a) Colour coding shall be as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 2 runs of 4.0 sqmm cable and run of 4 Sqmm cable for earth and one run of PVC casing caping shall be measured and paid as one unit.

Material and labour for sub-main wiring with 2 runs of 10 sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade) 1100 volts grade for phase , drawn in and including heavy grade PVC casing caping not less than 25mm wide (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required including one run of 6 sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade) 1100 volts grade as earth dolly/mains including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location as per existing complete all as specified and directed. Note: (a) Colour coding shall be as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 2 runs of 10 sqmm cable and run of 6 Sqmm cable for earth and one run of PVC casing caping shall be measured and paid as one unit.

MADHU ENTERPRIZES

ROHIT CONSTRUCTION

Sachin santosh dalvi

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.