ADDN ALTN AND AUGMENTATION TO POWER SUPPLY SYSTEM FOR LIFTS AT PIRU VIHAR MANEKSHAW MARG AND ENGR OFFRS MESS UNDER GE U PLANT AND MACHINERY DELHI CANTT 10

Amount

Taking down/out unserviceable control panel and Supply, installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable, OSG assembly and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 7.5 KW, 380/480 volts, 50 Hz as per sample suitable for 08 passengers lift (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Including read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete. Note:- COP & LOP will be measured & paid for separately under respective items of this BOQ.

NOTES for item No. 1.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provide with calibration pad & proper mounting in controller alongwith any other connectection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor without any extra cost. (d) The control wiring shall be secured & confirmed to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work required shall be done by contractor with own arrangement and no extra cost.

Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 08 Passenger lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight Floors (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push button along with all connected accessories complete suitable for 08 Passenger lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight Floors (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Taking down/out unserviceable control panel and Supply, installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable, OSG assembly and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 11 KW, 380/480 volts, 50 Hz as per sample suitable for 13 passengers lift (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Including read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete. Note:- COP & LOP will be measured & paid for separately under respective items of this BOQ.

NOTES for item No. 4.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provided with calibration pad & proper mounting in controller alongwith any other connection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor without any extra cost. (d) The control wiring shall be secured & conforming to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work required shall be done by contractor with own arrangement and no extra cost.

Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 13 Passenger lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight Floors (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push button along with all connected accessories complete suitable for 13 Passenger lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, fixing, testing and commissioning ARD 1.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 08 passenger Lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed. (Make of ARD & Battery:- As per OEM recommendation)..

Supply, fixing, testing and commissioning ARD 2.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 13 passenger Lifts (Make of existing lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed. (Make of ARD & Battery:- As per OEM recommendation).

Supply, fixing, testing and commissioning ARD 1.0 KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 10 passenger/680 Kg Lifts (Make of existing lift Otis Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 03 Nos. including taking down old unserviceable ARD complete all as specified and directed. (Make of ARD & Battery:- As per OEM recommendation).

Supply, fixing, testing and commissioning ARD 2.0 KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 1000 Kg goods Lifts (Make of existing lifts Otis Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 05 Nos. including taking down old unserviceable ARD complete all as specified and directed. (Make of ARD & Barrery:- As per OEM recommendation).

Supply, fixing, testing and commissioning ARD 2.0 KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 06 passenger Lifts (Make of existing lifts- Indofuji Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 12AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed. (Make of ARD & Battery:- As per OEM recommendation). Note:- Contractor has to submit purchase voucher of main items such as ARD,SP3 based control panel, LOP, COP etc.