REPAIR TO DRAINS FENCING HARDSTANDING RETAINING WALL SECURITY WALL AND GATE ETC AND MAINT/REPAIR OF RUSTED/BROKEN GI PIPE AND FITTINGS PVC TANKS FLOAT VALVES TANK STAGING SANITARY FITTINGS AND CONNECTED BR WORKS IN SHILLONG CANTT UNDER GE SHILLONG

Amount

Dismantling post or strut (Wood, steel, RCC) any section incl taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, complete all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and as directed

Excavation in trenches n.exceeding 1.50m wide and not exceeding 1.5 in depth for foundation etc and getting out as in soft/loose soil complete all as specified and as directed.

Excavtion over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil ass as specified and directed.

Removing of surplus exacavated material (soil) to distance n.exc. 50m and disposing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soil complete all as specified and directed.

M&L for sand filling in trenches as a cushioning/bedding and haunching to PVC pipe including watering complete all as specified and as directed.

M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6, complete including demolition at old precast cement concrete block walling complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded aggregates as in plinth protection including finishing even and smooth without using extra cement complete all as specified and as directed including demolition of old PCC as in plinth protection.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.

M&L for PCC (1:3:6) type C2 using 40mm graded aggregates as in surface channel and drain, complete all as specified and as directed including demolition of old PCC as in surface channel and drain.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

Excavation in post holes (or similar holes) each in any type of soil n. exc. 0.5 cum, getting out, returning filling in an ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 M and making good complete all as specified.

Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete, all as specified .

TMT bar 10mm dia and over cut to length ,bent to shape required including cranking , bending spirally for hooping column hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and as directed

All as per item No 17 above but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders complete all as specified and as directed

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

MS work for screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in cills,lintels upto 1.50 metre clear span , cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works,complete all as specified and as directed

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

M& L for 10mm thick rending in cement mortar 1:4 on fair faces of bricks or concrete surface and finished even and smooth without using extra cement, complete all as specified and as directed

M&L for for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface on external surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and directed.

M&L for for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

M&L Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, all as specified.

M&L Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint , all as specified.

Dismantling barbed wire fencing of any description, size, spacing, all as directed.

Dismantling fencing wire mesh any type, all as directed.

S&F Galvanised 2 strand steel barbed wire, 2.24 mm, barbed with 2.00 mm dia barbs at spoacing 75 mm and straining and fixing to any type of strandard rails straining bolts, incl securing or tying at crossing with provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Restraining and resecuring incl making good staples etc. of barbed wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engr-In-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-In-Charge

Round bars/TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe.290.Gde-E-165

S & Fixing as in repair 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as drains all as specified.

Formwork to sides of concrete fdns,drains, footings, bases of cols, raft and fafts beams, sides and soffits (if any) of fdns and plinth beams, and similar works and fair finished surface.

S & F prepolished coloured rubber mould paver block any shape and size conforming to IS 15658-2006 of 80mm thickness (M-40 grade) as in plinth & hard standing set in CM (1:6) includung filling joint with white/coloured cement to match complete all as specified & directed..

RCC type B-1 1:2:4 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for vitrified ceramic tiles (Paving dark shed, 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd.

M&L walling of Random rubble , uncoursed, polygonal rubble walling brought up to course built in cement mortar 1:4 complete all as specified and as directed

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) including necessary form works as I precast bond stone set in CM 1:6 complete all as specified and as directed

Extra over Hammer dressing with maximum depression on face from straight edge held against the dressed surface n, exc 20mm complete all as specified and as directed

M&L raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar 1:3 complete all as specified and as directed

M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed

M & L for preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coats of white washing over a coat of chalk whiting complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes and removing away form site complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipesand removing away form site complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 25mm bore of pipes and removing away form site complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing away form site complete all as specified and as directed.

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F , Vitreous china wash down closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat cover complete all as specified and directed

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repairs vitreous China clay WHB flat back size 550x400 mm incl pedastal , PVC waste pipe 32 mm dia, waste coupling brackets etc complete.

S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of complete all as specified and as directed make Jaguar/Marc/Parryware

S&F in 20mm Gun metal, globe or gate vavles, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as specified and as directed

S&F in repairs pillar tap 15 mm, chromium plated, fancy type complete all as specified and directed make:- Sona, Prayag or equivalent

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 74 above , but for 20mm dia (Bore).

All as per Item No 74 above , but for 25mm dia (Bore).

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed.

Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed.

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in positing complete exc 250 and nexc 500 ltrs complete all as specified and as directed

Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in positing complete exc 500 and nexc 1000 ltrs complete all as specified and as directed

S&F Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

Supply only Integral waterproofing compound

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

M&L for for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

MS HO Shadap

M/s A L Traders