Civil Works to the TNLA Election 2026 at Arignar Anna Government Arts and Science College at Villupuram in Villupuram District.

Dismantling clearing away and carefully stacking materials useful for reuse for Brick / Stone Masonry in cement mortar walls under 3m high etc., Complete complying with standard specification and as directed by the departmental officers.

Hire charges for Barricading using casurina bullies 10cm to 13cm and 60cm below ground level and 118 cm to 120cm above ground level gixing 3 horizontal bars 5cm to 8 cm. The horizontal should be in 3 tier and the lowest should be 45 cm. Above ground level the second 83 cm above ground level and the third 113 cm above ground leve. Total height 120 cm above ground level. Three tiers should be provided in all places, and tied with coir and removing the same after the function is over. (Extra rate for conveyance will not be allowed) For 10 Rm (Labour and hire charges only) etc., complete complying with standard specification.

Hire Charges for fixing of plain G.I.sheet/0.80mm thick /(22gauge) partitions using Silver oak size of 75 x 75mmof 3m hight oak and cross country wood reeper of size of 50x25mm including cost of labour earth work etc., complete. This including cost of materials deductions the value of the materials useful for reuse or as fire wood as the care may be as the cost of retrieved materials deducted already before arriving the rate for this items, the retrieved materials has to be dismantled and taken away by the contractor.

Hire charges for fixing of plain G.I.sheet / 0.80mm thick (22 gauge) using with country wood reeper 50x25mm including cost of nails and labour charges etc. This including cost of materials deductions the value of the materials useful for reuse or as fire wood as the care may be as the cost of retrieved materials deducted already before arriving the rate for this items, the retrieved materials has to be dismantled and taken away by the contractor.

Hire Charges for plywood partitions sheet of 12mm thick with country wood reeper 50x25mm in cluding cost of materials nails etc. Complete. This including the cost of reterived materials deductioned the value of the materials useful for use or as fire wood as the care may be as the items for deducted already before arriving the cost rate for this items the reterived materials before has to be dismantled and taken away by the contractor etc.

Hire charges for weld mesh partition using Square hollow section pipe with size 50 x 50 thick 2.5mm for vertical ports having 1.00m @ centre to centre with horizontal stiffeners using 50 x 25 thick 2.5mm thick hollow section pipe horizontally at 45 cm c/c vertically with weld mesh 1" x 1" c/c and vertically size upto 2.50m height.The rate is inclusive of cost of all materials,labour for fixing with fixing materials cutting the steel,welding and grinding for finishing and transportation cost etc.,complete complying with standard specifiction and as directed by the departmental officers.

Single Leaf

Supplying and fixing 30mm thick solid core PVC door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter (Conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC 'C' channel of size 30 x 50mm forming styles, and 75x50mm for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the 'C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250x16mm - 1No., aluminium tower bolt 250x12mm - 1No. aluminium D type handle 200mm etc. complete, as per direction of Engineer in charge and drawing.