Certain B/R Repairs to Sagar vihar,Navy Park area, Phoenix view, JCDA, NSCB and other minor units under GE Haddo, Sri Vijaya Puram

Amount

Dismantling wall/ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets. Complete all as specified and directed.

M & L for seamless designed gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philips head with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distember with roller finish over a coat of primer cmplete all as specified and directed.

M & L for anodised aluminium snap grid frame work for false ceiling 605mm x 605mm using aluminum anodised sections as specified in SSR Part I 1991 including cutting, drilling, jointing etc complete including provn of 3-6 mm dia GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards of approved make, 605mm x 605mm size duly applied with two coats of oil bound distember over a coat of primer all as specified and as directed.

Dismantling wood boarding,panels,beams or any description, fixed any position with nails Complete all as directed.

M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard, wall with finish to match all adjoining surfaces including sanding and applying mixture of filler and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed

M & L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete

M & L for 18mm thick HDF boarding (Fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site , complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/ Greenply/ Amnchidply / or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed.

S & F stainless steel auto closing hinges of standard size.

S & F stainless steel 150mm cupboard handles

S & F stainless steel 100mm tower bolt

S & F Magnetic door catcher for cup board

S & F in repairs 19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for built - up cupboards, shelves and pelmet boxes. Complete all as specified and directed.

Dismantling plain/corrugated steel sheets in roof covering including ridges Complete all as directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note: Over lap shall be provided as specified by the manufacture. all as as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified

S & F Roof trusses (framed), trussed purlins crane gantries, post, rails and fastenings and heavy bracket framing (Beam, tee, angle, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-0 or Fe. Complete all as specified and directed.

M&L for Band strap, supports stays for rain water, ventaling pipes including bolts, if required, hooks (stay), heavy for large gates, hook and pintel hinges, hild fasts, hookes for hanging fan, plain angle cleats for securing purline to wood truses or rafter knee pieces inserts, two way and three straps, plate washer and similar small articles conforming to Fe-410-0. Complete all as specified and directed.

S & F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. Complete all as specified and directed.

M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar. Complete all as specified and directed.

M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over 15mm thick screed bed in CM 1:4 all as specified

Demolition of cement concrete block on any description

M&L for precast cement concrete block masonry with solid blocks using PCC 1:3:6 (20mm graded aggregate) type C1 exc.10cm in width and setting in CM 1:6 complete all as specified.

Taking down cement plaster on walls in cement mortar, including raking out joints, hacking for keys and scrubbing down with water etc complete as preperatory to receive new plaster all as specified and directed by Engr-in-Charge.

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface fair and even without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6. Complete all as specified and directed.

Supply only integral waterproofing compound.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistent primer . Complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer all as per manufacturers instruction and as specified complete.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each & removing to store

Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shurtters from the frame ) and removing to store all as specified and directed.

Taking down chowkats or frames (without taking down Shutters from frame) size n exc 1.5 sqm each all as specified and directed.

M&L for second class hard wood plain solid straight chowkats and frames wrought frmed on the solid rounded or chanbered put together with glue and pinned at joints including preservative treatment all as specified.

M&L for second class hard wood 35 mm thick plain frames panelled door shutters (any number of pannels) with of veenerred particle boardmedium density wood particle boards with commercial face supplied and fitted to chowkats all as specified and directed

S&F 35 mm thick glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8023 (a), in II nd class hard wood.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for aluminium partition, window and door with frame and shutters fully or partly glazed , sliding / openable / fixed / fully glazed and pannels with 12mm thick pre-laminated partical board including all fittings (supply only floors spring, glass, Imax hinges, partical board, gauze will be measured separately) the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I.

Supply only stainless steel IMAX hinges for aluminium window shutters.

M & L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination.

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet & edges will be painted to match with printed sheets rainforced sheet M.S square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 150mm extruded aluminium alloy handles fabricated type anodised.

S&F 100mm long medium weight cold rolled mild steel butt hinges fixed with screws.

S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised.

S&F 300mm long aluminium alloy anodised sliding door bolts complete.

S & F cast iron door closer Aluminium (Diecast) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, or steel frame concrete or brick surrounds, glazed

Supply only 4mm thick sheet glass, ordinary quality in squares n.exc 0.5Sqm in each pane. Complete all as specified and directed.

Supply only 5.5 mm thick sheet glass, ordinary quality in squares n.exc 0.5Sqm in each pane. Complete all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples . Complete all as specified and directed.

M&L for preparing old surfaces of wood and wood based material exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old surfaces of steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.

M&L for complete removal of old decorated surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.cornices and applying two coat of antifungal exterior emulsion paint including one coat of primer complete all as specified and as directed.

M&L for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty of minimum 1mm thickness complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and cornices by broomingn down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old surfaces of ceilings and cornices by broomingn down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed. .

Supply and fixed for any colour fancy type curtain rods with design head of both side of the curtain rod complete all as directed and approved by EIC.

Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) complete all as specified.

M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light shade vitrified ceramic coloured tiles of polish area of each tiles not exceeding 0.36 Sqm , 9 to 10 mm thick in floor, dado, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on vertical surface as skirting and dado, wall etc. complete over 10mm thick backing coat rendering in CM 1:3.

Taking down GI tubing 15 mm dia, with connections.

S&F GI tubing 15mm bore fixed to walls/floor/roof complete with all fittings.

Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

Taking down GI tubing 20 mm dia, with connections.

S&F GI tubing 20mm bore fixed to walls/floor/roof complete with all fittings.

Supplying and laying of 25mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

S & F in repairs 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm PVC connection 600mm long with brass check nut on both sidies screw to iron pipes.

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy (Make-Jaquar Cat. No. Con-053KN)

Supply and fixed in repairs CP WHB mixture cast copper alloy with central hole for WHB and long shank fancy type 15mm bore complete all as directed ( Make : Jaquar Cat No Con 167KNB) or equivalent

S&F in repairs CP Single Towel Rail 600 mm long Make : Jaquar (AQN 7711) or equivalent complete all as specified and directed.

Supply and fixed in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply and fixed in repairs CP bib cock 15mm dia with crutch handle as approved fancy type long body complete all as specified(Make - Jaquar Cat. No. CON-107KN). or equivalent.

Supply and fixed in repairs vitreous china wash down water closet pane (pedestal pattern white) standared size with 'S' or 'P' approved brand complete.(Make- Hindware, Jaquar, Parryware, Cera or equivalent)

M&L in repair PVC Flushing cistern 10 ltr capacity high or low level including bracket etc all as specfied and directed.

S & F in repairs vitreous china wash down water closet pane (Pedestal pattern white) standard size with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified. Make : Jaquar Pt No (LYS WHT 0314) or Equivalent..

Supply and fixed in repairs vitreous china WHB white flate back of with 15mm dia polythene connection waste coupling and 32 mm dia PVC waste pipe 900 mm long etc. complete all as specified. (Make- Jaguar Cat Pt No-CNS-WHT-WB 02) or equivalent. or equivalent.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors Complete all as specified and directed.

M&L for heavy duty Non skid tiles of size 300x300x9mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M & L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs as directed

M & L for 25mm cement concrete type B-1, 1:2:4 (20mm graded aggregate) Complete all as specified and directed.

M&L chequered Cement concrete tiles 30 cm x 30cm x 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed by Engr-in-Charge.

S & F aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polythelene core with PVDF coating of 30.0 micron fixed over frame of aluminium tubular section 25 x 50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener, having panels not exc 1200 x 1200mm with necessary silicon fitting, in approved pattern as in column, beam, wall etc. complete all as specified and as directed. Note:- Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate.

S&F multi wall poly carbonate sheet 4 mm thick with required side lap fixed in position on steel frames as in roof covering/wall partition and railing with required screws etc., complete all as specified and as directed.

Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.

Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.

Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Note :- The unit rate quoted shall deemed to include the cost of following :-

ONE LIGHT/FAN point controlled by one, one way 5 Amps switch.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board.

ONE BELL point controlled by one, one way 5 Amps switch.

Description same as per item Sl No 96 above but point wiring with two single core 4.0 Sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 3 pin 15 Amps socket out let on independent board complete all as specified and directed.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

S & F modular bell push 5 Amps 1 modular 230v, 50Hz AC complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

S & F stepped type modular fan regulator, 2 modular type complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand

M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 5A, 240 volts complete all as specified and as directed.

S&F in repairs switch socket combination box type 2 in 1, 5 pin, 5 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand

S&F in repairs switch socket combination box type 2 in 1, 6 pin, 5 Amps & 15 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand

S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed. Make: Anchor/Cona/Legrand

S & F in replacement of capacitor 2.5mfd, 230 Volts for ceiling fans including taking out old unserviceable one complete all as specified and as directed. Make:- Capco/ Univarsal/ Tibcon/ Epcos

Taking down carefully ceiling fan of any sweep/ cap/ make from its existing position of any height/ loaction after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade, fixing up blades and hanging back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts etc shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY.

Description same as per item Sl No 108 above but, exhaust fan of any sweep/cap/type complete all as specified and directed.

Description same as per item Sl No 108 above but, wall mounted fan of cap 400 mm sweep complete all as specified and directed.

Taking down of unsv exhaust fan of cap 300 to 450 mm mm sweep of any make from its existing position and rewinding by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.

Suplly only ball bearing suitable for ceiling fan with bearing No. 6201/6202 complete all as specified and as directed.

Suplly only shaft suitable for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.

S & F exhaust fan blade set of 250/300/380mm sweep (steel body) complete all as specified and as directed.

S & F Air ventilation fan blade set of 200/250 mm sweep (PVC body) complete all as specified and as directed.

M & L for repair/ replacement of exhaust fan supporting MS frame with legs suitable for exhaust fan of cap 300 mm sweep complete all as specified and directed.

S & F Fan motor not less than 1200 RPM, 230 volt, single phase for Air ventilation fan of cap 200/250 mm sweep (PVC Body) complete all as specified and as directed.

S & F Fan motor not less than 1400 RPM, 230 volt, single phase for Exhaust fan of cap 300-450 mm sweep (steel body) complete all as specified and as directed.

Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed by Engr In charge. Make: Usha , Model No TECHNIX or equivalent to CG/ Havells/ Orient

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of wornt out spares and reassembling the geyser and re-fixing back in its original position complete all as specified and as directed. NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY.

S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed.

S & F air ventilating fan 200 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed.

Supply only heating element 1500 watts.

Supply only thermostat switch.

SUPPLY ONLY pressure release valve.

SUPPLY ONLY thermal cut out.

SUPPLY ONLY indicator lamp RED/GREEN colour.

SUPPLY ONLY PVC connection 15mm size with PTMT nuts of length 600mm. Make:- Prayag/ Polytuff

Supply & fix Modular Ac Box With 20A DP MCB "C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent

M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping shall be measured as one unit length.

Description same as per item Sl No 129 above but sub main wiring with four runs (1P+1N) of 4.0 Sqmm single core duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire.

Description same as per item Sl No 129 above but sub main wiring with two runs (1P+1N) of 1.5 Sqmm single core duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire. NOTE for Item No ( 129 to 131): Two runs (1P+1N) of copper conductor, One run of 1.5 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

S & F in replacement of Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways, and making good to the distrubed surface /walls complete all as specified and directed.

S & F in replacement of MCB DB, SPN, 12-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.

Description same as per item Sl No 133 above but 8 way.

Description same as per item Sl No 133 above but 4 way.

S & F MCB TPN 40-100 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S & F in replacement of MCB, TP, "C" series, 230 volts, 25-63 Amps, 10 KA rupturing capacity complete all as specified and as directed.

S & F in replacement of MCB, SPN, "C" series, 230 volts, 32 Amps, 10 KA rupturing capacity complete all as specified and as directed.

S & F in replacement of MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed.

S & F in replacement of 18 watts surface mounted LED light fitting , white/yellow colour as reuired as site with slim high perfomanance surfaced mounted LED light fittings, round/square shape as required at site made from die-cast aluminium and CRCA covering, powder coated in white colour complete all as specified and directed. MAKE: Luker Cat No LNPSRR18 or equivalent make of Havells/CG/Philips NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S & F in replacement of of LED slim panel lighting fixture of 18 Watt recess mounted 220V , 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker Cat Part No : LNPR18 or equivalent make in CG/ Philips/ Havells.

Description all as item No 141 above but 15 watt recess mounted. Make - Luker Cat Part No : LNPR15 or equivalent make in CG/ Philips/ Havells.

Description all as item No 141 above but 12 watt recess mounted. Make - Luker Cat Part No : LNPR12 or equivalent make in CG/ Philips/ Havells.

Description all as item No 141 above but 9 watt recess mounted. Make - Luker Cat Part No : LNPR9 or equivalent make in CG/ Philips/ Havells. NOTE for item No 141 to 144): The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

S & F and testing Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT522 or equivalent to CG/Philips Havells

S & F in replacement and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/Philips Havells

S & F in replacement of and testing LED recessed mounted 595 mm x 595 mm luminarie with high transmitive diffuser of cap 40 watt, with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: LUKER model No LKM 2240 of any colour (WH/NWH/WW) as reuired or equivalent to Philips/CG/ Havells . NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S & F in replacement 30 watts LED building security light fittings, IP 65 luminaire, Pressure die cast aluminium housing powder coated graphite grey and toughened glass including necessary fixing arrangements as per site requirements all as specified and directed by Engr In Charge. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells

Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

Repair to LED light /PTLs of any model/make/rating in position including testing of serviceability of connected accessories, and wiring upto respective switch/control unit including and replacing unserviceable items such as drivers , holder and making light functional. Note: (i) All the spares such as drivers, holder, LED tubes etc including replacing will be will measured and paid separately (ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs to light fitting and completion report to be submitted all as specified and as directed

S & F in replacement of 7 Watts holder type (E22) LED lamp (E22) 230 Volts, 50Hz complete all as specified and as directed. Make :- Philips/ CG/ Havells/ Bajaj

S & F in replacement of 7 Watts retrofit holder type (E27) LED lamp 230 Volts, 50Hz complete all as specified and as directed. Make :- Philips/ CG/ Havells/ Bajaj

M&L for Repair to point wiring for light/fan/socket by cutting, removing and replacing the burnt and unserviceable wire with new FRLS cable and conduits with copper conductor 1.5/2.5 Sqmm size, jointing with same size wires, replacing the saddles, refixing the loose/hanging conduits/casing capping properly all as directed. Note:(i) Rate is inclusive for FRLS cable and other minor items (ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs and completion report to be submitted all as specified and as directed

M&L for taking down of unsv /damaged Casing & caping of size 25mm x12 mm from its existing location and S & F in replacement of the same alongwith connected accssories ,fixing with the wall, roof etc as specified and directed by Engr In Charge.

Description all as per item No 154 above but Conduit 25 mm dia.

V KARTHICK (BID ID -3340180)

SHUBHAM SHANKAR GAIKWAD (BID ID -3340193)

ABR Construction (BID ID -3337194)

M/s SA Traders (BID ID -3338680)

M/s Ramesh Lal (BID ID -3341235)

BISAKHA PLUMBING WORKS (BID ID -3340034)

M/s Prem Enterprise (BID ID -3341015)

T.THIYAGARAJAN (BID ID -3342782)