PROVN OF CERTAIN UNIT (PH-I) AT TENGA UNDER GE 859 EWS

Amount

BUILDING AND STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDING AND STRUCTURE” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 6,75,02,200.00 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE AND DEVELOPMENT (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “SITE CLEARANCE AND DEVELOPMENT ” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 51,81,239.17 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 44,661.09 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,68,728.80 inserted by the MES in Schedule ‘A’ Part-IV.

EXTERNAL WATER SUPPLY (Sch 'A' PART-V)

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 5,81,469.55 inserted by the MES in Schedule ‘A’ Part-V.

EXTERNAL ELECTRIC SUPPLY (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 28,17,128.16 inserted by the MES in Schedule ‘A’ Part-VI.

ROAD, PATH AND CULVERT (Sch 'A' PART-VII)

Lump sum price worked out by the Contractor for “ROAD, PATH AND CULERT” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 35,44,479.75 inserted by the MES in Schedule ‘A’ Part-VII.

SEWAGE DISPOSAL (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,82,882.18 inserted by the MES in Schedule ‘A’ Part-VIII.

AREA DRAINAGE (Sch 'A' PART-IX)

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 17,03,939.33 inserted by the MES in Schedule ‘A’ Part-IX.

COMPOUND WALL / FENCING (Sch 'A' PART-X)

Lump sum price worked out by the Contractor for “COMPOUND WALL / FENCING” as listed in Schedule ‘A’ Part-X Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 13,36,291.53 inserted by the MES in Schedule ‘A’ Part-X.

STEEL GATE (Sch 'A' PART-XI)

Lump sum price worked out by the Contractor for “STEEL GATE” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,31,440.19 inserted by the MES in Schedule ‘A’ Part-XI

RETAINING WALL (Sch 'A' PART-XII)

Lump sum price worked out by the Contractor for “RETAINING WALL” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,05,45,203.09 inserted by the MES in Schedule ‘A’ Part-XII.

RCC WALL (Sch 'A' PART-XIII)

Lump sum price worked out by the Contractor for “RCC WALL)” as listed in Schedule ‘A’ Part-XIII Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 27,87,977.32 inserted by the MES in Schedule ‘A’ Part-XIII

FIRE FIGHTING & FIRE ALARM SYSTEM (Sch 'A' PART-XIV)

Lump sum price worked out by the Contractor for “FIRE FIGHTING AND FIRE ALARM SYSTEM” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,73,489.60 inserted by the MES in Schedule ‘A’ Part-XIV

BARRICATING OF SITE FOR CONSTRUCTION (Sch 'A' PART-XV)

Lump sum price worked out by the Contractor for “BARRICATING OF SITE FOR CONSTRUCTION” as listed in Schedule ‘A’ Part-XV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 12,98,636.85 inserted by the MES in Schedule ‘A’ Part-XV

LIGHTNING PROTECTION (Sch 'A' PART-XVI)

Lump sum price worked out by the Contractor for “LIGHTNING PROTECTION” as listed in Schedule ‘A’ Part-XVI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,11,078.30 inserted by the MES in Schedule ‘A’ Part-XVI.

MISC E/M AND B/R WORKS

S&F CI Sluice valve, 100mm dia, flanged of class PN 1.6, including iron wheel with stainless steel spindle complete all as specified and directed.

S&F CI Sluice valve, 80mm dia, flanged of class PN 1.6, including iron wheel with stainless steel spindle complete all as specified and directed.

S&F Cast Iron Air release valve, with two air outlet, 80mm dia bore, and fixing up in water supply mains complete all as specified and directed.

M&L for construction of Solid PCC Block masonry valve pit of size (600 x 600 x 600) mm (internal dimensions), 200 mm thick precast cement concrete solid block masonary wall in cement mortar (1:4) over 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in foundation, 15 mm thick rendering in cement mortar (1:6) internally, externally upto 15 cm below ground level provision of valve pit cover made out of 3 mm thick MS sheet welded with ISA 40x40x5 mm thick angle iron frame all round including provision of hinges, lifting handles, and locking arrangement fixed on top of valve pit by means of hold fast 150 mm long, embedded in PCC 1:2:4 type B1 (Block size 230x200x100 mm) including applying two coats of synthetic enemel paint over a coat of red oxide zinc chrome primer and necessary earth work in hard/dense soil complete all as specified and directed.

S & F Energy saving, environmental friendly, long life, Decorative wall light fixture made up of Polycarbonate, with and including 1x6 W LED lamp B22 base complete all as specified and directed. Model Apple Cat No. LHFOFTE1TZ1W012 Make : Havells or equivalent approved make.

S&F LED light fitting 1x18 W,6500 K, 230 V, wall mounted Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate diffuser, environmental friendly,energy efficient LED batten with integrated electronic driver, fixed on and including 02 Nos of PVC round/square block, screws etc complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Model E-Lite LED Pride Plus nxt Cat No. LHEXAPP7IN1W018 Make : Havells or equivalent approved make.

All as per item SI No. 17.06 here-in-before but LED light fitting 1x24 W. 230 V complete all as specified and directed. Cat No. LHEXACP7IN1S024 Make : Havells or equivalent approved make.

S & F energy saving and environmental friendly long life LED Bldg security light 25 Watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment including driver with IP66 protection and impact resistance of IK07 complete with GI light grade bracket 40 mm dia 1.2 mtr long bend to shape with fixing arrangement and connecting wire all as specified and directed. Cat No. ENDURAPEARLSL25WLED757SASYTOPCMP Make Havells or equivalent approved make.

S & F Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 35 watt with high power LEDs as light source, suitable for Area Lighting complete all as specified and directed. Cat No. JETA QUANTOPLUSFLP3OWLED 757SYMLENS Make : Havells or equivalent approved make.

S & F Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 60 watt with high power LEDs as light source, suitable for Area Lighting complete all as specified and directed. Cat No. JETA QUANTOPLUSFLP6OVVLED 757SYMLENS Make : Havells or equivalent approved make.

S&F BLDC Exhaust PVC Body with louvers 150 mm sweep, 2000 RPM, single phase 140-285 Volts, AC 50 Hz with Air delivery 356 m3/hour , power consumption 11 watt , automatic/ gravity open/close shutter including provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan including writing of "Consumer No' 2 cm height with synthetic enamel paint complete all as specified and directed. Model/Make: Atomberg or equivalent model of Havells.

S&F BLDC Exhaust PVC Body with louvers 200 mm sweep, 1600 RPM, single phase 140-285 Volts. AC 50 Hz with Air delivery 800 m3/hour , power consumption 16 watt, automatic/gravity open/close shutter including provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan including writing of "Consumer No' 2 cm height with synthetic enamel paint all as specified and directed. Model/Make: Atomberg or equivalent model of Havells.

Supply, installation, testing and commissioning out door type LT feeder pillar box of suitable size, pedestal mounted, CPRI approved, factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of suitable CRCA sheet 3.15 mm thick, framing with suitable MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Platform made out of PCC 1:3:6, complete with the following items housed in :- BUSBAR :- 800 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance INCOMING (a) MCCB 4 Pole 400 Amp, 415 Volt, 50 Hz, thermal magnetic adjustable rupturing capacity 35 KA, Ics = 100% Icu - 01 No. Item Continued as 17.14

Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of suitable CRCA sheet 3.15 mm thick, framing with suitable MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Platform made out of PCC 1:3:6 complete with the following items housed in :- BUSBAR :- 50 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING (a) MCCB 4 Pole 32 Amp, 415 Volt, 50 Hz,thermal magnetic adjustable rupturing capacity 16 KA, Ics = 100% Icu - 01 No. Item Continued as 17.16

Supply, installation, testing and commissioning outdoor type LT feeder pillar box of suitable size, pedestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of suitable CRCA sheet 3.15 mm thick, framing with suitable MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Platform made out of PCC 1:3:6, complete with the following items housed in :- BUSBAR :- 600 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING (a) MCCB 4 Pole 320 Amp, 415 Volt, 50 Hz, thermal magnetic adjustable rupturing capacity 35 KA, Ics = 100% Icu - 01 No. Item Continued as 17.18

Supply, installation, testing and commissioning out door type LT feeder pillar box of suitable size,pedestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of suitable CRCA sheet 3mm thick, framing with suitable MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6 complete with the following items housed in :- BUSBAR :- 120 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING (a) MCCB 4 Pole 80 Amp, 415 Volt, 50 Hz, thermal magnetic adjustable rupturing capacity 16 KA, Ics = 100% Icu - 01 No. Item Continued as 17.20

M&L for Solar street light system 36 Watt including in built SCC, SPV Panel 150Wp, Lead Acid Battery 12 Volts, 120 AH mounted on Sheet metal box of suitable size at 3.0 Mtr height, GI tubular pole 7.5 Mtr long and 6.0 Mtr above ground level with PCC (1:3:6) type C-1 and earth work complete all as specified and as directed. (MAKE : Havells HSN Code 8543 or equivalent.)

S&F LED street light fitting, 35 watt, 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified and directed.

S&F junction box made out of polycarbonate with IP 65 protection of suitable size including - 04 Nos cable terminal, 02 Nos polycarbonate cable gland etc complete all as specified and directed.

S&F Automatic Power Factor Control Panel with MD-XL capacitor and MCCB as incomer(Auto/manual option ) with 100 KVAR with 5 steps (50+25+15+5+5) complete all as specified and directed.

M&L for 2 mm thick THERMOPLASTIC Road Marking, hot making paint (Minimum qty of materials @ 2.02 gm per Cum ) of specified shade/colour using process by fully /semi automatic thermoplastic materials applicator machine filled with profile shoe glass beads (minimum qty of glass beads @ 250-300 gm per sqm, to be embedding and anchoring at depth of 50-60 % and should pressure type system having tank heater and profile shoe heater driven by experienced operator on road surface including cost of all materials in all respect as specified and directed. MAKE : AASHTOM (Apcomark), Auto mark Technologies (India) Pvt Ltd., Metalic, (Hibrite ), STP (Shell Mark). NOTE : (a) Road marking materials should comply with BS-3262-Part-1 1:1989. (b) The work shall be executed by manufacturers authourised applicators only.

S & F reflective Road Stud DA 971 (p) (10X128X29.5), weight 248 gm, ABS Engineering plastic, dynamically designed having high impact and fitted with two Nos highly reflective reflectors on both sides complete all as specified and directed.

M & L for continuous brick edging with PCC block of size 300X200X100 mm, width equal to width of the brick, laid dry on end vertically in type C-1 (1:3:6) (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Supply, fixing, testing and commissioning Fire pump, diesel engine driven, horizontal end suction, centrifugal type confirming to IS - 12469:1988 with CI Casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings, suitable for delivering 1620 LPM , 70 meter head , 1800 RPM, complete all as specified and directed.

Supply, fixing, testing and commissioning Fire pump, electrically driven horizontal end suction, centrifugal type confirming to IS - 1269:1988 with CI casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with range of operation 0% to 150% of rated capacity for 440 V, 3 Phase. 50Hz 70m Head, 1620 LPM discharge complete all as specified and directed.

Supply, fixing, testing and commissioning Jockey horizontal end suction, centrifugal type confirming to IS - 12469:1988 with CI Casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with non over loading power characteristics for frequent start/stop operations for 440 V, 3 Phase. 50Hz 70m Head, 180 LPM discharge complete all as specified and directed.

Supply, installation, testing and commissioning of fire terrace Pump electric driven , horizontal end suction , centrifugal type , conforming to IS: 12469-1988 with CI casing, bronze impeller and Stainless Steel shaft on heavy duty bearings suitable for continuous operation with range of operation 0% to 150% of rated capacity for 440 Volt, 3 Ph,50 Hz with discharge 450 LPM on 30 mtr head complete all as specified and directed.

Supply, laying, jointing, testing and commissioning Heavy duty (Heavy Class) GI pipe 150 mm dia including specials like bend, tee, flange etc complete all as specified and directed.

Supply, laying in trenches, jointing , testing and commissioning ductile iron pipe both end flanged including specials,class ''K-9'',150 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning Yard Fire Hydrant comprising of single headed oblique type ground faced hydrant valve conforming to IS:5290 , ISI marked , made out of gun metal with 63 mm dia instanteneous outlet of 80 mm dia flanged inlet , hose coupling adopter of size 63 mm , instanteneous spring lock arrangement , GI chain , blank cap and CI hand wheels etc complete all as specified and directed.

S&F Hose pipe of 63 mm dia, 15 mtr long re-inforced rubber lined (RRL), synthetic fibre , circular woven jacketed , with tested working pressure 12Kg/Cm² , burst pressure 36 Kg/Cm² to 32 Kg/Cm² incl gun metal male & female instanteneous type coupling approved by the Department complete in all respect. Hose shall conform to IS:639-1979 Type-II and coupling heavy quality conforming to IS:903-1985 with ISI certification complete all as specified and directed.

Supply, fixing, testing and commissioning Fire Hose Cabinet (approx. 1500 mm x 800 mm x 250 mm ) fabricated from 18 gauge MS sheet, double door with 4 mm thick front glass door and locking arrangement , door frame made of 16 gauge MS sheet for & including Landing Valve single headed oblique type ground faced conforming to IS:5290 , ISI marked , made of gun metal with 63 mm dia instanteneous outlet -01 No, Reeled Hose pipe of 63 mm dia. 15 mtr long re-inforced rubber lined (RRL) with gun metal male & female instanteneous type coupling- 02 Nos , Short type Branch pipe Gun Metal with standard male instantaneous spring lock type 63 mm dia coupling with gun metal nozzle 15 mm dia , Reeled 180° swinging type First Aid Fire Hose Reel 20 mm dia 30 mtr long - 01 No , Gate Valve 25 mm dia. - 1 No , Gun metal Nozzle 6 mm.- 01 No & Fire Extinguisher ABC type 6.00 Kg- 01 No. complete all as specified and directed.

M & L standard short type Branch pipe Gun Metal with gun metal nozzle 15 mm dia , outlet with standard male instantaneous spring lock type 63 mm dia coupling. Branch pipe and nozzle shall conform IS: 903-1985 all as specified and as directed.

Supply, fixing, testing and commissioning Fire Hose Cabinet (approx. 800 mm x 600 mm x 250 mm ) fabricated from 18 gauge MS sheet double door with 4 mm thick front glass door and locking arrangement , door frame made of 16 gauge MS sheet for accomoded reel hose and fire brigade inlet connection, painted fire red out side and brilliant white inside and mounted on masonary platform complete all as specified and directed.

Supply, fixing, testing & commissioing of cast iron double flange butterfly valve hand operated Class-1 , PN 1.6 conforming to IS:13095-1991 of pressure not less than 15Kg/Cm² complete with flanges , bolts, nuts , gaskets , washers etc. of size 80 mm dia, complete all as specified and directed.

Supply, fixing, testing & commissioing of cast iron double flange butterfly valve hand operated Class-1 , PN 1.6 conforming to IS:13095-1991 of pressure not less than 15Kg/Cm² complete with flanges , bolts, nuts , gaskets , washers etc. of size 100 mm dia complete all as specified and directed.

Supply, fixing, testing & commissioing of cast iron double flange butterfly valve hand operated Class-1 , PN 1.6 conforming to IS:13095-1991 of pressure not less than 15Kg/Cm² complete with flanges , bolts, nuts , gaskets , washers etc. of size 150 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning CIDF Non Return Sluice Valve of PN 1.6 rating, water work quality conforming to IS 5312 part - I, having cast iron body and gun metal working part with nuts, bolts gaskets etc. size 80 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning CIDF Non Return Sluice Valve of PN 1.6 rating, water work quality conforming to IS 5312 part - I, having cast iron body and gun metal working part with nuts, bolts gaskets etc. size 100 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning CIDF Non Return Sluice Valve of PN 1.6 rating, water work quality conforming to IS 5312 part - I, having cast iron body and gun metal working part with nuts, bolts gaskets etc. size 150 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning Foot valve 150 mm dia conforming to IS:4038 complete all as specified and directed.

Supply, fixing, testing and commissioning Strainer 'Y'- type conforming to IS of size 150 mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning Rotational moulded polythylene water storage tank 1000 litre capacity (cylindrical vertical with clossed top) hoisted and fixed in position complete all as specified and directed.

Supply, fixing, testing and commissioning Brass or GM gate Valve 50mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning Brass or GM gate Valve 25mm dia complete all as specified and directed.

Supply, fixing, testing and commissioning of Gun Metal fire brigade inlet connection for connecting to external fire hydrant ring main, consisting of 2 Nos 63 mm dia instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete all as specified and directed.

S&F Cast Iron Air Release Valve with two air outlet, 100 mm dia bore complete all as specified and directed.

Supply, installation, testing and comminssioning Pressure Gauge dial type 100 mm dia 0-21 Kgs rating complete all as specified and directed.

Supply, fixing, tesing and commissioning Pressure Switch Universal type complete all as specified and directed.

Supply, installation, testing and commissioning of Sprinkler glass bulb type (Standard response) as per IS:15106/TAC guidelines, 68 degree temperature rating Pendent type complete all as specified and directed.

Supply, fixing, testing and commissioning Detectors Complying with and type certified to EN - 45 Addressable type microprocessor based programmable inteligent type multisensor heat and smoke Combination as per IS:11360 detector Photoelectric / Optical with base with self built inteligence complete all as specified and directed.

Supply, installation, testing and commissioning Outdoor Fire Point with MS sheet roof and wooden stand duly painted with fire red paint and mounted on masonary platform to accomoded under mentioned items, complete all as specified and directed:- (i) Fire Extinguisher ABC type 6.00 Kg (ISI marked IS: 15683 and Tac approved)complete with initial charge and wall bracket, Make:Cease Fire/Getec/ Minimax.- 1 No. (ii) Fire Extinguisher CO₂ type 4.5 Kg capacity, Make:Cease Fire/Getec/Minimax.-1 No (iii) Fire Breather -1 No (iv) Fire Hooke - 1 No. (v) Fire Bucket - 2 Nos.

S&F FRLS (special fire fighting red cable) cable, armoured cable 2 core 1.5 sq.mm. copper conductor for entire building complete all as specified and directed.

S&F PVC armoured cable 4 core x 2.5 sq mm copper conductor for booster to booster pump control panel complete all as specified and directed.

S&F ERW steel conduit pipe 25 mm bore with fixing arrangement in ceiling or wall complete all as specified and directed.

S&F ERW steel conduit pipe 40 mm bore with fixing arrangement in ceiling or wall complete all as specified and directed.

S&F PVC armoured cable 3.5 core 35 sqmm copper conductor complete all as specified and directed.

S&F PVC armoured cable 4 core 10 sqmm copper conductor complete all as specified and directed.

Supply, installation, testing and commissioning of Indoor Cubical type LT Electric Control Board , factory fabricated CPRI approved, tested with suitable neoprene rubber gasket to make it completely dust & vermin proof , degree of protection not less than IP-43 and general construction conforming to IS:13947 , front & back openable with locking arrangement. The panel shall be provided with ventilation faciality in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured tape/sleeves of rating in conformity to the incomming MCV rating. The panel board shall be fabricated out of 2.0 mm thick CRCA sheet duly pre-treated & powder coated , supporting frame made out of 50 x 50 x 6 mm angle iron suitable for 3 Ph , 4 Wire system 415/440 volts grade including complete internal wiring with not less than 2.5 Sqmm coper conductor including cable glands of suitable sizes and mounted on MS equal channel of suitable size duly grouted in floor complete all as specefied and as directed with & including the following accessories : - BUSBAR :- 200 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance INCOMING (a) MCCB 4 Pole 200 Amp, 415 Volt, 50 Hz, thermal magnetic adjustable rupturing capacity 25 KA - 01 No. Item Continued as 17.64

Supply, installation, testing and commissioning of Indoor Cubical type LT Electric Control Board , factory fabricated CPRI approved, tested with suitable neoprene rubber gasket to make it completely dust & vermin proof , degree of protection not less than IP-43 and general construction conforming to IS:13947 , front & back openable with locking arrangement. The panel shall be provided with ventilation faciality in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured tape/sleeves of rating in conformity to the incomming MCV rating. The panel board shall be fabricated out of 2.0 mm thick CRCA sheet duly pre-treated & powder coated , supporting frame made out of 50 x 50 x 6 mm angle iron suitable for 3 Ph , 4 Wire system 415/440 volts grade including complete internal wiring with not less than 2.5 Sqmm coper conductor including cable glands of suitable sizes including PCC platform/plinth of suitable size complete all as specefied and as directed with & including the following accessories : - BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made out of 04 Nos tinned copper 150 Amps rated , duly insulated with 1100 volts grade PVC sleeves , rigidly mounted on 'F' class insulators of non-hygroscopic , non-comburstable of suitable size. Item Continued as 17.66

Supply, laying, jointing, testing and commissioning of 200 mm dia ERW Mild Steel Pipe, heavy duty (C Class) conforming to IS:1239-1974/2004 part-I and ammendments, of wall thickness 5.4mm, with all online pipe fittings , flanges(ASA 150 class) , bends tees , reducers , nut-bolt-washers(galvanised heavy grade) , rubber insertions / gaskets , 'U' clamps , tapping for gauges/instruments including cutting/bending hot or cold , welding, fixing in/on walls/ceilings or laid in ground including surface preparation of pipes and painting with one coat primer and two or more coats of synthetic enamel paint as required and directed for suction & delivery Header and delivery header to hydrant ring main complete all as specified and directed.

All as per Srl Item No. 17.67 here-in-above but for 25 mm dia (for sprinklars connection) complete all as specified and directed.

All as per Srl Item No. 17.67 here-in-above but for 50 mm dia (for sprinklars sub-main distribution) complete all as specified and directed.

All as per Srl Item No. 17.67 here-in-above but for 65 mm dia (for sprinklars sub-main distribution) complete all as specified and directed.

All as per Srl Item No. 17.67 here-in-above but for 80 mm dia (for header to header connection) complete all as specified and directed.

All as per Srl Item No. 17.67 here-in-above but for 100 mm dia (for yard hydrants & wet raiser) complete all as specified and directed.

Supply, installation, testing and commissioning of silent built-in within an acoustic enclosure diesel engine driven generating set water cooled including AMF panel for standby power supply 415 Volts, 03-Phase, 4-Wire, 50 Cycles/Sec, 125 KVA (100 KW) coupled with155 BHP diesel engine or next higher standard size available at 0.8 power factor complete with alternator directly coupled to diesel engine, mounted on common base frame and complete with self-starter, fuel tank capacity not less than 8 hours fuel requirement and battery as recommended by OEM, battery leads, sound proof canopy etc. with features for automatic shutdown in the event of a circuit failure condition arising from low oil pressure, high coolant temperature, over speed etc. and microprocessor based gen-set controller with the following under-mentioned features complete all as specified and directed. (a) Alphanumeric LDC display with LED backlight. (b) Operator interface. (c) Suitable to provide a record of most recent fault conditions and fault history. (d) Complete alternator data, viz. voltage, Ph-Ph, Ph-neutral, KVA, Frequency etc. (e) Complete engine data viz. starting battery voltage, engine temperature, engine running hours, engine oil pressure etc. (f) Control including provision of service adjustment and calibration of DG control functions. Item Continued as 17.74

GENSET SPECIFICATIONS :- Prime Mover Rating : 155 HP / 114 KW Current Rating : 173.90 A No. of Phases : 03 Power Factor : 0.8 (Lag) ENGINE SPECIFICATIONS :- Output Prime : 155 BHP Aspiration : Turbocharged-after cooled. No. of Cylinders : 06, In line. RPM : 1500 Governor : Mechanical ALTERNATOR SPECIFICATIONS :- Voltage : 415 RPM / Frequency : 1500/50 Hz Enclosure : IP 23 Voltage Regulation (Max) : +/- 1%. Insulation Class : H Class Conformance Standards :-IS 4722, BS 5000, IS 1460, ISO 8528, BS 5514, ISO 3046. Make and Size of Battery : As recommended by OEM. Item Continued as 17.75

Supply and installation of on load change over switch 200 Amp rating for DG set complete all as specified and directed.

Construction of culvert, span 1.5 m and 12.0 m long, with RCC M-25 (Design Mix) using 20 mm graded stone aggregate & TMT bar as in slab including necessary formwork including PCC (1:2:4) (using 40 mm graded stone aggregate) type B-2 in foundation, RR masonry, abutment wall, excavation and earthwork in hard/dense soil, PCC bed block, PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in wearing coat over slab, PCC (1:2:4) type B-1 over water way, RR masonry parapet wall, returning filling including ramming & removing of excavated surplus materials to a distance not exceeding 100 m complete all as specified and shown in drawings.

Construction of RCC Septic tank 50 users, designed to carry sewage and sludge water, excavation in any type of soil, PCC (1:4:8) in foundations, RCC M-30 Design Mix in walls, Base Slab, Baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc complete with effective depth 1.5 mtr and overall depth of 3 meter complete all as specified and directed.

Construction of Soakage wells 2.4m dia X 3.0 m deep including excavation, in any type of soil, foundation in PCC (1:3:6), honey comb masonry, with top ring of M-25 (design mix) concrete, including inercepting chamber, screen chamber made of cement concrete block masonry work in CM, RCC cover slab in M-25 /SFRC cover interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed.

Sub total

M/s Jony Enterprises

SHAMBHALA TRADERS

M/S GLOBAL ROYAL CONSTRUCTION