GE(S)/M-13/2023-24

Amount

Taking down existing cement plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed.

M&L for preparation of newly plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coats of oil bound distamper complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of cement base paint including curing, at any height complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of oil bound distamper at any height complete all as specified and directed.

M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brick work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L in repair for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required including complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick in single piece flooring and like set and jointed inneat cement slurry including pointing in epoxy grout to match marble shade, including taking down existing damage stone floor over and including 15mm thick screed in CM 1:4 . complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade vitrified ceramic tiles coloured tiles 10mm thick(square/rectangular) polished, area of each tile not exc 0.36 sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor etc., including demolition of existing floors complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-40 Grade, laid dry over and including 50mm thick washed river sand as approved and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block (EXCEPT PAVER BLOCK) of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-40 Grade, laid dry over and including 50mm thick washed river sand as approved and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) in edging of path (interlocking paver) including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Machine pressed precast coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors finish the surface even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 with integral water proofing compound both on floor and wall including application of epoxy resin coating, polymer modified cementation coating of fosroc or pedilite on floor for sunken floor including demolition of existing surfaces complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in surface channels & drains including demolition of existing drain etc., complete all as specified and directed

Extra for fair finished dain or channel 30cm inner girth in cement concrete, using extra cement inculding forms,moulds,mitred/stop end etc.,complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description n. exc 1.0 Sqm each, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening at site, complete all as per specifications & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as per specifications & drawing.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.

S&F as in repair anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F as in repair for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and directed.

S&F as in repair for anodised aluminium window and ventilator shutters,side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane,complete all as specified and directed.

S&F GI wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair GI wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.

M&L for preparation of old surface of steel & iron work of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint , complete all as specified and directed.

M&L for preparation of old surface of wood work of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint , complete all as specified and directed.

S&F "as in repair" 25mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors,incl taking down existing pipes complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, incl taking down existing pipes complete all as specified and directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore (concealed type) stop valve, with long flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" vitreous china wash down water closet pan (pedestal pattern), white including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinging device including connections to drain or outgoing pipe and to flushing pipe anti syphonage pipe etc, complete all as specified and directed.

S&F "as in repair" PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

S&F "as in repair" health foucet (with 1.5mtr long PVC tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.

S&F "as in repair" plastic seat cover,back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 ltr but not exc 500 ltr including inlet/outlet pipes and writing of date of cleaning (CLEANED ON __ __ 2023) and from mouths of circulating pipes, etc. Complete all as specified and directed.

M&L for 20mm thick rendering in CM 1:4 on roof top concrete surfaces, finished the surface even and smooth without using extra cement & smooth WPC liquid of make Dr.fixit or STP as per manufactrer instructions @ 0.200litre in 50kg of cement after sweeping/brushing, clean and washing down with water including necessary scaffolding complete all as specified and directed.

Removing existing roof treatment (any type) by picking, sweeping / brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0 kg of cement per sq.meter complete all as specified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0. (f) Top of membrane shall be provided with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

S&F "as in repair" 40mm thick brick tiles laid on 15mm cement mortar(1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruid oil by weight of cement over APP membrane incl dismantling of existing bricks complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

Formwork to chajjas, landing , balcony railing and similar work:(horizontal or sloping) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F "as in repair" PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.

S&F "as in repair" sink with drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm including CP waste coupling and 32mm dia waste pipe including making disturbed surface to match with existing surfaces, complete all as specified and directed.

S&F corrugated waste pipe, 32mm dia, suitable for WHBs/Sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

Demolition of PCC (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Cleaning and removing all inaccessible roof and wall vegitation and plants after cutting & removing from roots and removing the same out of MoD land complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection and paving laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.

Taking down roof trusses,exc 4mtr but n.exc 8mtr coupled rafters or trussed beams complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

Mild steel screws bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screws ends to be fitted with washer and one hexagonal or square nut, exc 22.5 cms and not exc 30 cm long , 16mm diameter of shank,complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in coloumn for fixing to trusses complete all as specified and directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or colour) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

Abrol construction co

M/S HIMANSHU BUILDERS

M/s GIrdhari Lal Rakesh Kumar

SEVEN UP GOVT CONTRACTORS

surjit enterprises

Alishan Builders

Bidder Name

surjit enterprises

Abrol construction co

M/s GIrdhari Lal Rakesh Kumar

Alishan Builders

M/S TARA CHAND CONSTRUCTION CO.

M/S HIMANSHU BUILDERS

SEVEN UP GOVT CONTRACTORS