PROVN OF SECURITY WALL WITH ALLIED INFRA FORCERTAIN UNITS AT UDHAMPUR UNDER GE (P) UDHAMPUR

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total Amount of Sch 'A' Part - II (Plumbing Work)

Total Amount of Sch 'A' Part - III (Internal water supply work)

Total Amount of Sch 'A' Part - IV (Internal Electrification work)

Total Amount of Sch 'A' Part - V (Sewage Disposal work)

Total Amount of Sch 'A' Part - VI (Area Drainagel work)

Total Amount of Sch 'A' -VII (Path Work)

Total Amount of Sch 'A' -VIII (Security Wall & Gate Work)

Total Amount of Sch 'A' -IX (Protective Work)

Total Amount of Sch 'A' Part -X (External Electrification Works)

Total Amount of Sch 'A' Part -XI (External Water Supply Works)

Total Amount of Sch 'A' Part -XII (Site Development & Site clearance)

Total Amount of Sch 'A' Part -XIII (Dismantling and Demolition Work)

Sch 'A' Part - XIV (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

MCB, single pole, 6 to 32 Amp, `C' series,10 KA, 240 Volt, complete all as specified.

MCB, single pole and neutral, 6 to 32 Amp, `C' series, 10KA, 240 Volt, complete all as specified.

LED tube light fitting of capacity 18/20/21 watt alongwith integrated driver and including LED tube rod integrated type IP 20. The fitting shall be provided with LED driver of same make, voltage surge protection upto 2.5 KV, operating voltage 140- 270 volt. The rate includes necessary fixing and connecting arrangement all as directed by Engr-in-Charge. Make : Crompton Cat Part No LCTL-18-CDL or techinically and commercially equivalent model of Philips/Bajaj/Wipro/ GE/Syska/ Surya as approved by GE.

LED Bulb, B-22 base, 9/10 watt, complete all as specified.

Ceiling fan of 1200 mm sweep BEE 5 star complete 230 volts single phase and provisioning of flexible copper conductor of size 1.5 sqmm of required length from ceiling rose to ceiling fan for giving connection complete, all as specified and directed by Engr-in-Charge.

Exhaust fan with aluminium louvers of size 300mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed.

45 Watt, lP66 LED street light luminaries comprising of Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/ watt, lumen maintenance> 70 % at 50000 hrs, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1, IEC-61000-3-2, IEC 61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with three core twisted copper conductor flexible copper wire of suitable size from street light to junction specified and as directed.

120 Watt, lP65 LED Flood light luminaries comprising of rectangular shape Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output>100 Lum/Watt, lumen maintenance>70% at 50000 hrs, color temp 5000-6500 K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1 / IS10322 CPT0.5 Sec/Sec.5) 1987. The luminaire must have secondary optics with perfectly matched lens for better light control with and including turn table made out of MS angle of size 40x40x5mm bent to shape, angle and size as directed and smaking electrical connections with three core twisted copper conductor flexible copper wire of suitable size, complete all specified and as directed.

35 Watt, LED post Top lantern with die cast aluminum body and with clear toughtened glass diffuser and IP 65 protection connected woth all accessories including fixing of light fitting with suitable size GI pipe light grade and necessary PCC work, complete all specified and as directed.

Timer switch 415 volts,3 phase of 20 Amp rating with contactor fitted inside steel enclosure, outdoor type, complete all as specified and as directed.

Concertina coil 600 mm dia, 56 loops, 2.5mm core wire, heavy gavanised (wire-275 GSM & strip-200 GSM), tensile strength of wire-1400-1500 N/Sqmm, weight 6-8Kg/coil, stretchable length- 6m to 8m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete, all as specified and as directed. Make: M/S Global Engg/ M/S Special steels Ltd/ M/S Super Fence/A1 fence.

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

Steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate (300mmx300mm), welded to pole, final taper plug, bolts, nuts, and screws poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-31, 9mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.50 m and marking pole No. with black paint at suitable height and erected in position, complete all as specified and directed. Note: Excavation and Earth Work ,PCC in foundation shall be measured and paid for separately.

Thermostatic cable junction box/distribution board of size 210x310x116mm, IP 65 with metric knockouts for cable entry of size upto 10 Sqmm 4 core with hinged cover and locking arrangement with and including MCB SPN 6 to 32 Amp of 2 strip and fastening MS clamp of sixe 25x3mm with LT poles, complete all as specified and as directed.

Road cutting for laying of cable/pipe and making good the disturbed/excavated surface as per existing road, complete all as specified and as directed.

Cutting existing water line connection 80/50mm for addition/alteration for 40/25mm bore pipe by insertion of Tee, socket, union etc. including welding, bending etc, including excavation and earthwork complete all as directed.

CREDIT SCHEDULE: Deduct Credit schedule worth Rs 2,83,720.00 (Minus) as listed in Schedule À' Part-XV . Note: Tenderers will not quote against this item being a firm amount. Contract lump Sum will be worked out offline after deducting the credit schedule amount.

Mehar Enterprises

M/S Inderjit Sharma and Co.

JINDAL BUILDERS

R K BUILDERS

M/S BHATIA BUILDERS AND CONTRACTORS

M/s Ravinder Kapoor Engineers and Builders