REPAIR/REPLACEMENT TO JOINERY, PLUMBING AND SANITARY FITTINGS AND OTHER B/R-I MISC WORK AT HQ CC, OFFRS MD ACCN OF AGE B/R-I UNDER GE (EAST) LUCKNOW

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

All as per item No 1 above but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

M&L for pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lungs,hinges,lock strike plate etc complete, as specified supplied complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed.

S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at joints complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F 30 mm thick IInd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge in SSR Part-I 1991 section 8 clause 8.20 (b) complete all as specified and directed.

S&F 35 mm thick plain framed, panelled shutters (two panel) of IInd class hard wood rail and styoles with lock rail and panel of 12 mm BWP grade BWR plywood the size of rail and style as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides incl 4.00 mm thick MDF board on both sides of flush shutter with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type B-1 both of surface finish, colour and pettern approved, fixed with approved adhesive, complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item no 13 but without glazing bars

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100mm size of butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and directed.

S&F 100mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F 100mm size mild steel pressed handles, oval type ISI marked stove enamelled black complete all as specified and directed.

S&F 75mm size of butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and directed.

S&F 125mm butt hinges extruded brass ,bright polished and fixed, type B - 11 complete all as specified and directed.

S&F brass handle ,extruded, fabricated type polished 150mm long complete all as specified and directed.

S&F brass sliding door bolt 300mm long with sand or die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts with barrel of extruded section complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete, all as specified & directed.

S&F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

S&F IInd class hard wood (sal) plain filltes square rectangular or tringular in section clean swan screwed with nails sectional are exc 13 Sq cm but not exc 25 Sqcm complete all as specified and directed.

M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of steel surfaces over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screw complete all as specified and directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Eye door viewer (Magic Eye) of suitable size fixed with panneled door shutter complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F 3mm thick ordinary palin glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors,/partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified and directed.

M&L 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5mm thick tinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle, complete all as specified and directed. Note:- (a) Quoted rate including 5.5mm thick tinted glass, SS wiremesh, Deco grill etc in this item. (b) Framed section 3 track size = 92x31.75x1.5mm (c) Shutter section size = 40x18x1.55mm

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cm thickness below and above ground level, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per item no 53 but, as on dado/ skirting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 and taking down cement plaster /terrazo dado/wall tiling and skirting. etc on brick or stone walls etc complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cementcomplete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc complete all as specified and directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern/EWC) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

Supply only water closet seat, cover white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F CP grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed.

S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc complete all as specified and directed.

S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe complete all as specified and directed.

S&F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S&F in repair CP shop dish fancy type fixed with SS screw on wall etc complete all as specified and directed.

S&F in repair toilet paper holder CP fixed complete all as specified and directed.

S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repairs cast iron floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed.

Disconnecting existing tanks, exc 250 Ltr & not exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning repairing, etc. measured separately) complete all as specified and directed.

Disconnecting existing tanks, exc 500 Ltr & not exc1000 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning repairing, etc. measured separately) complete all as specified and directed.

Dismantling PVC water tanks and removing for capacity exc 250 litres & not exc 500 litres etc., complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc.complete all as specified and directed.

Dismantling PVC water tanks and removing for capacity exc 500 litres & not exc 1000 litres etc., complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repair 25 mm dia stainless steel curtain rods including brackets and fancy type end knobs, complete all as specified and directed.

Dismantling of cast iron drain pipe jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed.

S&F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in wall with cement joints complete all as specified and directed.

S&F 75 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints complete all as specified and directed.

S&F in repair 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore cast iron bends with acces door of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F 100 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps 6 Kg/Sq cm complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

S&F of prelaminated particle board of 12mm thick, exterior grade, prelaminated both side with decorative choice lamination ,fixed with beading to aluminiume frame work etc complete all as specified & directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F of 12mm thickness toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required etc. complete all as specified and directed.

Taking out existing of aluminium frame/shutter of door /windows fixed same opening with glazed/ particle board in panels incl, wooden wall panelling all necessary repair and replacing with the aluminium snap beading, rubber packing, glazing clip etc upto area 4.50Sqm each etc complete all as specified & directed.

S&F in repair aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed. complete all as specified & directed.

S&F in repair brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified & directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 1.00 m long anodise aluminium door sill lfixed with screw etc complete all as specified & directed.

S&F in repair rubber door seal beading (size 50x5mmthick) fixed with screw etc complete all as specified & directed.

S&F solid PVC wall Linning consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame and PVC L-beading at top of wall lining,opening eadge of door & windows as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm thick for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

M&L for 4 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screwds to timber frame work, complete all as specified & directed.

M&L for 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame work block board grade 2 quality interior grade having both sides commercial faces fixed with screws to timber frame work, complete all as specified & directed.

M&L for applying two coat of melamine wood polish on new wooden wall surfaces including preparation and applying sealer/filler etc to have smooth and glossy finish surface to the entire satisfaction of complete all as specified and directed.

S&F in repair stainless steel pegs 6 legs fancy type, all as specified fixed, complete all as specified & directed.

S&F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repair symphonic action type single/twin type flushing cistern kit any size and any type complete all as specified and directed.

S&F in repair vitreous china coloured half stall type urinal with sensor assembly including CP brass urinal spreader, CP brass waste coupling, CP brass bottle trap, 40 mm dia waste pipe, grating & brackets, complete all as specified and directed.

S&F in repair viterious china coloured WHB 570x 470 counter top oval shape cascade pattern with pillar taps ,cast copper alloy capstan heads CP PVC connection, CP bottle trap and cp waste coupling 32mm dia in lead to waste pipe complete all as specified and directed.

S&F for vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 sqm but not exc1 Sqm in floor etc laid over 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

133.S&F of vitrifield ceramic tiles light shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 sqm but not exc1 Sqm as in skirting etc laid over 10mm thick screed bed in CM (1:3) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS

KUMAR ENTERPRISES

m/s raghubar dayal

M/S SWATI CONSTRUCTION

ANIL CONSTRUCTION

QUALITY CONSTRUCTIONS CO

M/s Durga Construction Company

M/s Ramesh Chandra

Tecj Nirmaan