Rewiring / Repairing of electrical fan and Fittings in new DGM CN (Tx-North) Agra office at M/W Bldg. Tora, OA Agra.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (A) Group 'A'

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

b) 2 x 2.50 sq.mm. + 1 x 2.5 sq. mm earth wire

c) 2 x 4 sq.mm. + 1 x 4 sq. mm earth wire

Supplying and drawing following size of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit etc as required. (a) 2 x 1.5 Sq. mm

b) 4 x 1.5 Sq. mm

c) 2 x 2.5 Sq. mm

d) 2 x 4 Sq. mm

Supplying and fixing of following size of steel conduit along with accessories in surface / recess i/c painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit etc as required. (a) 20 mm

Supplying and Fixing of following piano type switch/ socket in place of faulty components in existing switch board , Power points i/c connections etc as required.(a) 5/6 Amp single way Switch

b) 3Pin 5/6 Amp Socket outlet

c) 15/16 Amp Switch

d) 6 pin 15/16 Amp Socket outlet

e) 180 mm x100 mm x 60 deep MS box i/c phenolic laminated sheet cover etc

S/Fixing 20 watt LED 4 feet tube fitting suitable for single phase, 230 volts AC supply system connection etc complete as required.(M/s Cromption/ Philips or S.S make)

Replacement of following faulty components in existing fitting and fans i/c connections etc as required . a) 40W. 1200mm Flou. Tube (Philips/Crompton Make)

b) 40 W. Electronic Ballast (Philips/Crompton Make)

c) Brass Batten Holder

d) 12 watt LED lamp

e) 36 watt Pin type CFL

f) 15watt CFL pin type

g) Electronic fan regulator ISI Marked

Rewinding and overhauling of following exhaust fan replacement of bushes bearing shaft including capacitor etc. complete as required.(Note:-Dismatled copper wire shall be property of contractor, qoute the rates accordingly) a) Exhaust fan single phase, 450 mm, 240 V

b) 1200/1400 mm Ceiling fan single phase, 240 V

Providing Wall mounted fan upto 400 sweep with in bult regulator and silent operation i/c connection etc as required ( M/s Khaitan/ Cromption /havells make or SS make)

Supplying and fixing of 100 Amp TPN switch disconnector fuse unit with sheet steel enclosure, 415/500 Volts, with HRC fuses and all acessories etc complete as required.. (M/s L&T make FN 100 or SS approved make)

Replacement of 100 Amp Four Pole Isolator in the existing MCB DBs complete with connections, testing and commissioning etc. as required.

Supplying & Fixing of energy efficient 30 watt LED Street Light with IP 65 protection complete with all accessories on the existing pole i/c connection with 1.5 Sq. mm copper conductor single core cable etc. complete as reqd.(Make:-Crompton LSTS-30-CDL-M / Havells / Philips /Syska and SS make)

Providing prefabricated wall bracket for street light fitting for suitable size i/c fixing clamps, nut and bolts etc. as required.

Supplying and Laying of 2 x 1.5 sq. mm. copper conductor armoured cable PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade on surface / recess / ground etc as required

Shifting of 04 Nos. split type AC unit & 03 Nos Window AC unit from Admin Bldg Sanjay Place to M/W Bldg Tora ( Agra) including loading unloading , transportaion etc complete as required.

I.T.C of 1.5 / 2.0 TR split type A/C unit i/c brazing / welding of refrigeration pipe between indoor & outdoor unit and making good the damage, leak test etc complete as required. (At M/W Bldg Tora ( Agra)

Supplying and fixing 2 waysheet steel enclosure dust protected, duly powder painted with 20 amps "C" curve, SP&N MCB on surface or in recess complete with connections, testing and commissioning etc. as required.

Supply & Fixing of copper refrigerant pipe lines as suction and discharge length for split A/C unit of i/c foam insulation etc. complete as required.

Charging of refrigerant Gas R-22 in the existing split AC units i/c Supplying vaccmization and also pressure testing with nitrogen etc. complete with connections, testing and commissioning etc. as required.

Supply & fixing of powder coated prefabricated mounting stand for out door unit made out of 18 SWG Powder coated M.s Sheet and perforated angle iron of suitable size i/c cutting, welding, painting and grouting etc. complete as reqd.