CERTAIN REPAIR TO OTM ACCN OF FD HOSPITAL, INF BN-III, NEW ARMD REGT AND VBS UNDER AGE B/R-I AT NAMS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S & F 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's instruction complete all as specified all as specified.

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specificationn make Rajshree.

S&F Aluminium anodised powder coating any colour minimum coating 50 micron door/ windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame of fixiing with handles, tower bolts, rubber gasket and maruti lock , complete all as specified and directedetc complete Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately.

M&L for anodised aluminium powder coated door shutters, aluminium section weighting 0.55kg/m , incl necessary ,5 mm thick, black tinted glass panes with nano coating & glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with each shutter of any type complete all as specified all as specified.

S & F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ,5 mm thick, black tinted glass panes with nano coating & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc complete all as specified all as specified

M&L for powder coated aluminium window sliding type (Bombay pattern) with frame of 1.5mm thick aluminium sections including 5.00mm thick tinted glass fixed with & including anodized aluminium snap beading, glazing clips, joining clips, screws, standard rubber gasket, handles/ Knobs two nos. for each window and MS rollers two nos. for each window shutter etc complete all as specified and directed with following specifications:- (a) Aluminium section for window frame =101.50x44.45x2mm (b) Aluminium ventilator frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. Make of aluminium sections:- M/S JINDAL or M/S HINDALCO or M/S INDAL as approved by GE. (c) Aluminium window frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. Make of aluminium sections:-

M&L for providing and fixing fully glazed 10mm thick entrace tuoghening glass door comprising of one leaf glass shutter of any size gully glazed with neceesary handle , etching ,mpivot arrangement fixed to aluminium doors with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified. (a) All the samll works such as cuttings raking making holes pinning insertion etc making good to disturbed portion as per site requirements/ users / given by the Engineer-in-Chrage shall be included in unit quoted rates .(b) All itching work in glass as directed Engineer-in-Chrage shall be included in unit quoted rates. (c) All Glass door shall be water tight with megnets water seal/as directed Engineer-in-Chrage shall be included in unit quoted rates.

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One coat of Red oxide primer to MS window and guard bar. Note : complete all as specified and directed by Engineer-in-charge.

S&F in repair ,5 mm thick, black tinted glass panes with nano coating fixed to aluminium doors/windows/vents with necessary rubber gaskets duly with complete all as specified and directed.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F, floor doouble door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S & F in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as spd and directed by Engr-in-charge.

S&Fin repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass, other parts made of mild steelheavy duty and fixed

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.

S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.

Dismantling of brick works in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in Cement motar (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.

ditto above -28- but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L for 15mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

Supply only, integral water proofing compound. complete @ 3 % by weight cement roof and parapet/ vertical surfaces and like complete all as specified and directed.

M&L for Applying 1 mm thick wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

Material and labour for preparation of old wooden surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.

Material and labour for preparation of steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.

M&L for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of white wash on ceiling surface complete all as specified

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed

S&F solid PVC wall Lining consisting of 5mm thick single side wood grain printed PVC sheet and other side plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame/fillet as per specifications and drawing including dismantling of existing damaged wall lining complete all as spd and directed. Note-PVC sheet fillet shall be measured and paid separately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing incl dismantling of existing damaged PVC fillet complete all as spd and directed.

M&L for marble or any shade shade of thickness 18-20 mm thick in slab laid over 15mm thick screed bed in cement mortar 1:6 as in floor, steps, riser & treads and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises and rounding to edges of stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.. etc complete all as specified and directed. Note-size of slab will be decided by Engr-in-Charge.

M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M & L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishingand incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and e colour of tiles, incl dismantling / demolition over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L vetrified ceremic tiles 8 to 10 mm thick, in (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling / demolition , coloured tiles laid over and including 15 mm thick screed bed or bedding layer in Cement motar complete all as specfied and directed.

M&L for Vitriefied ceramic tiles 8 to 10mm thick square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match incl dismantling / demolition, Coloured on incl plaster (backing coat) 1:4 Cement motar 10mm thick

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishesincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for heavy duty, exterior grade (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes including demolition of PCC complete all as specified and directed.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand mortar 1:4, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed.

M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete including dismantiling PCC complete all as specified and directed.

(a) Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

(b) Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.

S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank triple layer (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank triple layer (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:6) over 15mm thick and jointed grouted flush pointing in cement Motar (1:3) completed all as specified and directed.

ditto above -77- but except bricks tiles complete all as specified and directed.

M&L of 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course including dismantiling of old PCC complete all as spd

M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed.Make : Asian paint, Sika, Fosroc

S& F, in repair vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as spd and directed by Engr-in-charge.

S & F in repair vitreous china ware counter ovel wash hand basin, any colour, size 570 x 450 mm size fixing in slab including fixing waste pipe , CP waste coupling all as specified and approved by Enger-in-Charge

S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as spd and directed by Engr-in-charge.

S&F in repair 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.

S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed.

S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. Make cera /jagaur/perry ware/hind ware

S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed.

S&F in repairs chromium plated Urinal spreader for fixing with 15 mm dia bore pipe complete all as spd and directed by Engr-in-charge.

S & F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints, any size with arms , including fixing to steel pipe or union complete all as specified and directed

S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms)

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

S&F, in repair Health Faucet/hand shower with 8mm dia 1mtr long easy flexible tube with chrome finish & wall hook complete all as specified and directed.

S & F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old mild steel of any description complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

Material & labour for gypsum board panel 12 mm thick as in ceiling including T section accessory of galvenised mild steel, GI suspender all as per manufacturer design confirming to IS 2095 and IS 2542 – 1981. Weight of board not less than 7 Kg per Sqm including two coat of Oil bound distemper over a coat of plaster of paris including taking down complete all as specified and directed. Note: - Rate quoted shall be deemed to be inclusive of gypsum board, frame work and suspender.

S&F in repair Mortice lock,vertical type, size 100 mm door lock 4 lever baras complete all as specified and directed.

S&F, in repairs, 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent as approved by GE) as in Kitchen cabinet complete all as specified and directed. (Note:- Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately)

S&F, in repair, for 5 mm thick ACP Aluminium composite pannel board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed.

M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed. ( Note:- WPC measured separately)

S&F GI tubing 40mm bore medium grade fixed to wall as sunken spout all as specified and directed

M&L for mirror polishing for old kota stone complete all as specified and directed by Engr-in-charge

Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge laying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. Note writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

500 ltr capacity

1000 ltr capacity

M&L, in repair, 75/100 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

Maintenance and overhauling of Steel rolling shutters (without taking down) opening size 2 to 16 Sqm by opening the top hood and cleaning, oiling, greasing and making free flow of shutters on its guide channels complete including cleaning, oiling, greasing of gear assembly all as directed and including two coats of synthetic enamel paint after preparatiopn of old surfaces complete all as specified and directed.

S&F, in repair, Steel rolling shutters, thickness of laths 1mm thick, with out ball bearing, as specified including top cover, an-choring rod, hasp and staple including one shop coat of primer, and erected in position as indicated, push pull or manual type complete all as specified and directed.

S&F, in repair, Steel rolling shutters, thickness of laths 1.25mm thick, with ball bearing as specified including top cover, an-choring rod, hasp and staple including one shop coat of primer and erected in position as indicated, but gear operated type wirh bevel gear box and crank handle complete all as specified and directed.

Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm each in same opening all as specified and directed

Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm but n exc 2.0 sqm each in same opening all as specified and directed

Taking down aluminium door shutter of any sizes including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

M&L for Demolition of reinforced cement concrete of cover slab/cooking platfrom and RCC roof tank etc complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in Slabs supported on walls,beams/lintel , landings,balconies, canopies, deck slabs and shelves including necessary form work complete all as specified and directed.

Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed

ss enterprises

M/S MAHAJAN CONSTRUCTION CO

M/s Vijay Construction Co.

GEE EMM ASSOCIATES

Chander Mohan Arora Contractor

AS CONSTRUCTION

tarlok singh contractor

Jaspal Construction Co.