EXTERNAL AND INTERNAL PERIODICAL SERVICES INCLUDING MISC B/R REPAIR WORK AND ROOF TREATMENT TO MARRIED ACCN AT SANYAT LINE, KARAM VIHAR, TIGRIS MOUDE LINES, SUMERIAN LINES, NEW MOUDE LINES, PARADE ROAD AND OTM ACCN TO CERTAIN UNITS IN THE AOR OF AGE

Amount

M & L 15 mm thick rendering in cement mortar 1:4 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position and after taking down cement or cement lime plaster , including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar 1:6 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position and after taking down cement or cement lime plaster ,including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling / bottom of roof slab/ chajja etc in CM 1:3, finished even and fair in any position and after taking down cement or cement lime plaster, including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L rendering 25 mm thick in two layer on fair faces of concrete or concrete surface in ceiling/ bottom of roof slab/ chajja in CM 1:3, finished even and fair in any position etc, including chicken wire mess fixed with nails etc and taking down cement or cement lime plaster, including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

M & L for providing and applying smart care Dampproof, a fibre reinforced elastometric liquid water prrofing membrane formulated with reinforced acrylic fibres having Sun Reflective Index (SRI) of 105 on horizontal/ vertical surfaces of roof/ wall/ chajjas in multiple costs @2.0 litre/ sqm. Primary coat is self-priming coat of elastomeric water proofing liquid (Dilution with water in the ratio of 3:1, damp proof : Water) and other coat to be applied undiluted. The coating needs to be reinforced with 40GSM Geotextile, to sandwiched between 2nd &3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Cgarge. Make : SmartCare Damp Proof of Asian Paint or equivelent in Berger/ Nerolac/ STP/ FOSROC/ SSPL only. Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE befor starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofingtreatment for a period of Eight years i fevour of GE. A sum equivelent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.

M & L for PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, benching, coping etc., and similar type of works, weathering, slightly rounded or chamfered angles including demolition of existing PCC of any type discription and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for preparation of internal/external old decorated brick/ concrete /plastered/un-plastered surfaces of walls, pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/ holes in surface filling with white putty etc to receive further treatment complete all as specified and directed.

M & L for preparation of old decorated concrete /plastered/un-plastered surfaces of ceiling / bottom of roof slab etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty etc to receive further treatment complete all as specified and directed.

M & L for preparation of internal/external new surface of plaster/concrete surface of walls, pillers, cornices etc to receive further treatment complete all as specified and directed.

M & L for preparation of new surface of plaster/concrete surface of ceiling / bottom of roof slab etc to receive further treatment complete all as specified and directed.

M & L for complete removal of existing internal/external any type of treatment including preparation of old decorated brick/ concrete /plastered/un-plastered surfaces surface of walls, pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty etc to receive complete all as specified and directed.

M & L for 2mm thick water proof wall care putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive further treatment complete all as specified and directed.

M & L for one coat of interior wall primer as on new / old prepared any type surface/ wall putty surface on wall/ ceiling etc, as per manufacturer's specification complete all as specified and directed

M & L for one coat of Exterior wall primer as on new / old prepared any type surface/ wall putty surface/plastered surface on wall etc, as per manufacturer's specification complete all as specified and directed

M & L for one coat of white wash applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of white wash applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of colour wash applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed. Note : (1) Work will be carried out in common area , stair case , balcony, passage area , parking area , terrace area in multistory building (G+9) and as directed by Engr-in charge (2) Rate quoted up to G+9 floor bldg including scaffolding

M & L for one coat of white wash applying on any type of prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for two coat of white wash applying on any type of prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for one coat of cement base paint applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of cement base paint applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for one coat of oil bound distemper, using roller brush , applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for one coat of oil bound distemper, using roller brush , applying on any type of prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for two coat of oil bound distemper, using roller brush , applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of oil bound distemper, using roller brush , applying on any type of prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for two coat of 1st quality acrylic interior emulsion of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for one coat of weather proof exterior emulsion paint premium quality of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of weather proof exterior emulsion paint premium quality of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M&L cutting shrubs, wild growth/trees n exc 30cm girth and removing complete vegetation growth from walls incl taking out roots from roofs/brick work and making good the disturbed surface with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate or filing with CM 1:3 etc as required including treating affected area with acid wash to check further growth of vegetation and disposing off the rubbish from site (MoD Land) from the above mentioned area complete all as specified and as directed. Note:- The rates quoted by the tenderers are deemed to be up to G+9 floor bldg included for safety precautions

M&L Providing and applying Ruff 'N' Tuff - Scratch trowel applied synthetic grooved finish texture standard (2 mm to 2.5 mm) medium rough surfaces, coverage @ 4.00 Kg / Sqm as approved pattern and any position /type of wall , piller, columan , facia etc and including taking down of existing texture/ any other treatment and prepration the surface with scrubbing down with water, scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces, repairs of all surface imperections- cracks, leakages, undulation and rust etc complete all as specified and as directed by Engr- in-charge.

M&L PVC hollow wall panelling 6 to 8 mm thick wood grain teak finished/any type decorative surface prelaminated inclusive of fixing on to wall incl moulding end caps/ L /U etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed.

M&L 4mm thick desginer ceiling board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instruction and including dismantling of old ceiling of any description/type with frame , complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

Refixing old steel water tubing galvanised 15mm bore fixed to walls, under floors and on ceiling surfaces and including taking up or down steel tubing 15 mm bore and connecetions, including cleaning for refixing etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

Refixing old steel water tubing galvanised 20 mm bore fixed to walls, under floors and on ceiling surfaces and including taking up or down steel tubing 20 mm bore and connecetions, including cleaning for refixing etc complete all as specified and directed.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167KNB and equivalent in list of make of CA.

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in list of make of CA.

S&F in repair 15mm angle cock/ stop valves, with wall flange , chromium plated cast copper alloy, screwed down, high pressure, with fancy handle, screwed ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make: Jaquar or equivalent in list of make of CA.

S & F in repair CP jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall etc complete all as specified and as directed.

S & F in repair stainless steel fancy type bracket for curtian rod with new screws for curtain rod complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position incl scafolding as required etc complete all as specified and as directed.

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 and after dismantling floor, hearth or wall tiling and with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge .

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:3 and after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4, rounding to edge of granite as per required and after dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed including hacking out old broken glass from wooden frames and steel frame complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in saft area upto the 10 story building also )

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

NOTE : (a) The work mentioned in above items shall be carried out in multi storied buildings (G+8) also which may require scaffolding or Jhulla arrangements or any other T&P items are included in the quoted rates by the contractor. (b) All debris obtained from demolition item shall be removed from the site at daily basis to avoid any seepage/leakage from roof slab and deposit the debris out of the MoD land.

A R construction

R. S. Associates

Gaurav India Corporations

Akhil Enterprises

garnet engineers contractors

M/s Sree Baba Traders

STAR CONSTRUCTION CO

POONAM ENTERPRISES

MAA SANTOSHI ENTERPRISES