CA NO. GE(W)/HSR-50/2025-26 REPAIRS TO FLOOR PLASTER OF BLDGS OF OTM AND MD ACCN OF JCOS/OR OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) including demolition of cement concrete complete all as specified and directed.

M & L for Light shade vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not .exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed bed in CM 1:6, including dismantling of old existing tiles complete all as specified and directed.

M&L for Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:4 including dismantling of old existing tiles complete all as specified and directed.

M & L for Dark Shade vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not .exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed bed in CM 1:6 including dismantling of old existing tiles complete all as specified and directed.

M&L for Vitrified ceramic tiles (Dark shade) 10mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:4 including dismantling of old existing tiles complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 including dismantling of old existing tiles complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick backing coat in cement mortar 1:4 including dismantling of old existing tiles complete all as specified and directed.

Renewing Glazed/Vitrified tiles in patches, area n .exc 5 sq.m. including removing and cleaning old tiles, preparing beds with 10mm thick CM (1:4) and laying or setting, jointing neat cement slurry and pointing with colour/white cement to matching colour of new or old tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300x450x7mm / 250x350x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of old existing tiles complete all as specified and directed.

Dismantling of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L, form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed.

M&L for cement concrete M-20 (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for Old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10mm thick backing coat in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified over 15mm thick screed be in CM 1:4 complete all as specified and directed.

Description all as item No 23.00 above but Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed.

M&L for Mirror polishing on existing or old marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L, Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 50mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey pigment cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping including sand cushioning 50mm thick complete all as specified and as directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 to brick/concrete ceiling surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M&L for Rough cast plaster as s[ecofoed (rendering coat not less than 10mm thick in CM 1:3 while it is still in plastic state the rough case misture consisting of cruhed stone or fine gravel aggregate size 6 to 12 mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall upto cill height complete all as specified and directed.

M&L for two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces and Chalk whiting, on plastered surfaces, prepare-tory to distempering complete all as specified and directed.

M&L for one coat of oil bound distemper on old plastered surfaces of walls including preparation of old surfaces complete all as specified and directed.

M&L for preparation new plastered surfaces of ceiling and applying two coat of white wash over Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over old surface including complete removal of existing treatment complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainlees steel sink, 1.00mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F of Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) including taking down old one complete all as specified and directed.

M&L for 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs of Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repairs, of Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F of 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets including taking down old unserviceable flushing cistern and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, fixed in repairs complete all as specified and directed.

S&F in repairs, of Wash basins, Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs of Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repairs of 15mm Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs of 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m with shutter each and refixing in same opening after carrying out plastering work complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters and refixing in same opening after carrying out plastering work complete all as specified and directed.