COMPREHESIVE E/M WORKS IN OTM AND MARRIED ACCN AT AFSSR GURGAON UNDER GE (AF) GURGAON

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Modular Switch and sockets will be measured and paid seperately).

(a) For one light point/fan point controlled by one SP switch

(c) For one bell point controlled by one No bell push

All as per item No-2 above but for one 3 pin socket out let, 6 Amps on same board

All as per item No-2 above but for one 3 pin socket out let, 6 Amps on Independent board

All as per item No 2 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. ( Only one 15 Amp point will be in one circuit)

Supply only Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply only Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply only Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, , suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Switch and sockets will be measured and paid seperately).

(a) For one light point/fan point controlled by one SP switch

(c) For one light point controlled by two 2 - way SP switches

(c) For one bell point controlled by one No bell push

All as per item No-12 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

All as per item No-12 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

All as per item No 12 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in existing PVC conduit including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Switch and sockets will be measured and paid seperately).

(a) For one light point/fan point controlled by one SP switch

(c) For one light point controlled by two 2 - way SP switches

(c) For one bell point controlled by one No bell push

All as per item No-16 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

All as per item No-16 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

All as per item No 16 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply and fixing ding dong bell AC 230 volt single pole complete all as specified and directed

Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.

Supply only Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply only Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply only switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

Supply only switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply only ding dong bell AC 230 volt single pole complete all as specified and directed

Supply only stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only Rigid non-metallic PVC conduit of external diameter 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Taking down old unsv VTPN DB of any size.

All as per item No 44 but TPN 8 way

All as per item No 44 but TPN 4 way

Taking down old unsv MCB SPN DB of any size.

All as per item no 48 but SPN 8 way

All as per item no 48 but SPN 12 way

Supply only MCCB 200 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply only MCCB 160 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply only MCCB 125 Amps FP 415 volts 3 phase 50 HZ, ,Ics=100%Icu,breaking capacity 16 KA complete all as specified and directed.

Supply only MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SP 40 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB TP 25-63 Amps 10 KA, 415 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Taking down unserviceable submain wiring of alluminium of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed.

M & L for in submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 25 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified . (Note:- 3 Runs of 6.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose) .

All as per item no 59 above but for 4.0 sqmm wire( For geyser and AC points)

All as per item no 59 above but for 2.5 sqmm wire

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED bulk head fittings, 10 watt, , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only surface mounted round shape 15 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only surface mounted round shape warm white 24 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 12 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 6 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 3000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only PVC gang box suitable for one switch 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge.

All as per srl item 72 above but for one 5 amps switch socket outlet.

All as per srl item 73 above but for one 15 amps switch socket outlet.

Supply only Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.

Supply only exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton Greaves.

Supply only exhaust fan heady duty metal body type 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only exhaust fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only wall mounting fan heady duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan.

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

Supply only ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-Charge.

Supply only in replacement of fan capacitor with copper wire plastic body 2.5 mfd.

Supply only in replacement of fan capacitor with copper wire plastic body 3.15 mfd.

Supply only in replacement of fan capacitor with copper wire plastic body 4.0 mfd.

Supply only white hylem sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 85 above but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 85 above but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 85 above but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

Supply only Batten Holder PVC white suitable for retrofit type CFL/LED Lamp cxomplete allas specified and as directed.

Supply and fix White cover plate with frame,1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge.

Supply only 3 pin plug top 15 Amps all as specified and directed by engineer-in-charge.

Supply only LED flood light fitting 150 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only LED flood light fitting 200 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only in repair LED street light fittings 90 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.

Supply only in repair LED street light fittings 120 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.

Supply only of GI pipe light grade 40 mm dia bracket to make L type for bldg light fitting complete all as specified and direted by Engr-in-Charge.

Supply only of MS flat clamp of size 30mmx5mm thick including nuts ,bolts and washer suitable for bldg light fitting complete all as specified and as directed by Engr-in-Charge.

Supply Only Disinfection hypo chlorine based having chlorine percentage 5-6 % in 40 Ltr jar all as specified and directed by engineer in charge.

S & F LED Bulbs of 07 watts including taking down complete all as specified and directed

S & F LED Bulbs of 09 watts including taking down complete all as specified and directed

Supply only aluminium thimble of size 25 Sqmm 3.5 core 1100 volt grade

35 Sqmm 3.5 core 1100 volt grade

50 Sqmm 3.5 core 1100 volt grade

95 Sqmm 3.5 core 1100 volt grade

120 Sqmm 3.5 core 1100 volt grade

240 Sqmm 3.5 core 1100 volt grade

300 Sqmm 3.5 core 1100 volt grade

400 Sqmm 3.5 core 1100 volt grade

Please Enable Macros to View BoQ information