Repair, replacement of internal and external electrification including PCC panel of pump houses (Pump-B, D and I) at Armapur Estate, Kanpur

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting fans etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc.

S & F for point wiring in PVC conduit pipe of HMS grade in required size (as directed) for light/fan point complete with PVC insulated and unsheathed copper cable 1.5 sqmm (Nominal area) multistranded conductor 1100 V, FRLS grade, single core including 1.0 Sq.mm PVC insulated copper cable to common earth and connected to earth dolly on wall surface/on ceiling surface with terminal boxes of pressed steel/plastic boxes factory made of required sizes with top cover 3 mm thick hylam sheet ISI marked white colour for mounting switches , sockets and complete with all bends, junction boxes, corners, couplers, elbow, fillers, tee pieces, cutting holes in or through wall, making good all disturbed work & wall to match the existing with connections and as specified. Make- For Cable/Wire -Finolex/Havells/Grandlay/Gloster/KEI Conduit pipe- Plaza/Associate/AKG

S & F for point wiring in PVC conduit pipe of HMS grade in required size (as directed) for 5 Amp socket point, independent complete with PVC insulated and unsheathed copper cable 1.5 sqmm (Nominal area) multistranded conductor 1100 V, FRLS grade, single core including 1.0 Sq.mm PVC insulated copper cable to common earth and connected to earth dolly on wall surface / on ceiling surface with terminal boxes of pressed steel/ plastic boxes factory made of required sizes with top cover 3 mm thick hylam sheet ISI marked white colour for mounting switches , sockets and complete with all bends, junction boxes, corners, couplers, elbow, fillers, tee pieces, cutting holes in or through wall, making good all disturbed work & wall to match the existing with connections and as specified. Make- For Cable/Wire - Finolex/Havells/ Grandlay/ Gloster/KEI Conduit pipe- Plaza/Associate/AKG

S & F for point wiring in PVC casing & caping of required size (as directed) for one socket outlet 15 A, independent , complete controlled by one switch complete with PVC insulated and unsheathed copper cable 2.5 sqmm (Nominal area) multistranded conductor 1100 V, FRLS grade, single core including 1.0 Sq.mm PVC insulated copper cable to common earth and connected to earth dolly on wall surface / on ceiling surface with pressed steel/plastic boxes factory made of required sizes with top cover 3 mm thick hylam sheet ISI marked white colour for mounting switches , sockets and complete with all bends, junction boxes, corners, coupler, elbow, fillers, tee pieces, cutting holes in or through wall, making good all disturbed work & wall to match the existing with connections and as specified. Make- For Cable/Wire -Finolex/Havells/ Grandlay/ Gloster/KEI Conduit pipe- Plaza/Associate/AKG

S & F for point wiring for one plug point 6 Amps on same board controlled by one switch complete with PVC insulated and unsheathed cable 1.5 Sq.mm (Nominal area) PVC insulated unsheathed multistranded copper conductor 1100 V, FRLS grade single core including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly. Make- For Cable/Wire -Finolex/Havells/ Grandlay/ Gloster/KEI Conduit pipe- Plaza/Associate/AKG

S & F for Wiring for circuit/submain wiring along with earth wire with 2x2.5sqmm+1x2.5sqmm earth wire PVC conduit pipe of HMS grade in required size (as directed) for light point and unsheathed copper cable 2.5 sqmm (Nominal area) multistranded conductor 1100 V, FRLS grade, single core including 2.5 Sq.mm PVC insulated copper cable to common earth and connected to earth dolly on wall surface / on ceiling surface with terminal boxes of pressed steel/ plastic boxes factory made of required sizes with top cover 3 mm thick hylam sheet ISI marked white colour for mounting switches , sockets and complete with all bends, junction boxes, corners, couplers, elbow, fillers, tee pieces, cutting holes in or through wall, making good all disturbed work & wall to match the existing with connections and as specified. Make- For Cable/Wire -Finolex/Havells/ Grandlay/ Gloster/KEI Conduit pipe- Plaza/Associate/AKG

Supply & fixing junction boxes (1/4 way) of size 25 mm ext.dia. Make-Plaza/Associate/AKG

S&F switch piano flush type 5 Amp single pole one way, Make:- Anchor/SSK/Havells

S&F switch piano flush type 15 Amp single pole one way, Make:- Anchor/SSK/Havells

S&F socket 5 Pin 5 Amp, flush type 240 Volt complete, Make:- Anchor/SSK/Havells

S&F socket Multipurpose 15 Amp 240 volt complete, Make:- Anchor/SSK/Havells

S&F ceiling rose surface bakelite of suitable size three terminal 240 Volt complete. Make:- Anchor/SSK/Havells

S & F steeped type Electronic ceiling fan regulator, flush type, on the existing phenolic laminated sheet, etc. as required. Make:-ANCHOR/SSK/HAVELLS.

S&F of PVC insulated,armoured,heavy duty electric cable with aluminium conductor,1100 volts,cross sectional area 240 sqmm,3.5 core.Make:- Havells,Gloster,Polycab,Finolex,KEI.

S & F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanized iron strip and as directed by EIC/WIC.

S & F Tubes, medium grade, galvanised, with all fitting, laid in trenches 80 mm. including tap log in every 6 mtr. length Make- TATA/JINDAL/SAIL

S & F Tubes, light grade, galvanised, with all fitting, laid in trenches 40 mm. Make- TATA/JINDAL/SAIL

Cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, shelves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n.exc 10 cm girth, (NOTE) : Cutting chases if any, required for concealed conduit wiring shall be measured and paid separately. The cutting chases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using PCC, putty and POP etc and applying finishing coat of existing treatment without any extra cost.

Demolition of concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) cement concrete (unrienforced)

Excavation in trenches in soft /loose soil n.exc 1.5 mtrs wide and n.exc 1.5 mtr. deep for under ground cable and getting out including forming bottom surface to required level or slope.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc.25 cm. soft/loose soil.

Supply & Laid dry old size brick work with sub-class B-Bricks straights or curved on plan exc 6m mean radius.

Supply , spreading & levelling of Ganga sand in trenches for cushioning of cable in layers not exc. 25cm thick

Cement concrete in foundations filling and mass concrete.Type C2 1:3:6 40mm graded aggregate.

S & F LED tube light fitting of 1 x 20 /18 watt , 230v, complete with all accessories internally pre-wired and including connecting up with twin core flexible copper conductor cable of size 0.75 sqmm. from ceiling rose to fitting. (Make:- Philips/ bajaj/Wipro/ Crompton/Havells)

S & F for earthing in replacement complete with GI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 32x6 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including required excavation and earth work in any strata, GI pipe 20mm dia medium grade for watering , and 40 mm medium grade as protection to earth strip upto 10 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover,watering and rainning 20mm graded stone aggregate the surrounding area of GI pipe to settle the soil before making of earth chamber, funnel & wire mesh including making of test point all as specified testing on complete and as directed by EIC.

S & F of GI pipe bracket of 32 mm. Bore dia of 1 meter length with required bend angle at center 02 no. of hole of 10mm. dia. as directed with 01 set of bracing clamp 20*5mm. size made up of MS strip with hole at both end of 10 mm. dia nut two nos. and fix to wall with the help of 10 mm. fastner.

Supply & fixing including connection of IP-66 road way luminaire with high power LED's as a light source of 70+/-5% watts, 6500K capacity complete, in epoxy powder coated pressure die cast aluminium housing & weather proof gasket for LEDs and control gear compartment and pressure die cast aluminium frame with heat toughened clear glass fixed with SS screws, side entry mounting, unique air vent in housing, corrosion resistance I bolt with anti vibration rubber bushing, secondary PC/PMMA lens for optimized light distribution,suitable for input voltage of 160-270V, AC, 47-55Hz, THD < 10%, and power factor > 0.90 , delivery lumens ≥ 100 lumens/watt, beam angle 120°, CRI > 70%, surge protection above 5KV, ambient temperature upto 70°C, with fixture life > 50,000 hrs. complete fitting with LM-79 & LM-80 certified and as directed by EIC. Make:- Bajaj/Philips/Wipro/Crompton with 3 years Warranty from the date of installation.

(For Pump D I) All as above in Sl. no.29 but (a) Bus bar copper - 600A capacity(current rating of bus bar to be calculated assuming 1.67amp per sqmm maximum) having a (3Ph + 1N) high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (Incoming & out going) (b) MCCB 4 POLE, 415v with microprocessor release 400 Amp. With breaking capacity 36 KA (Main Incommer)- 01 no. (c) On load Change Over Switch-01 no. 4 POLE, 415V 400 Amp. Qty.-01 no. (d) MCCB 3 POLE, 415V Adjustable type, 160 Amps with breaking capacity 36 KA -04 nos. (e) MCCB 3 POLE, 415V Adjustable type, 100 Amps with breaking capacity 16 KA - 01 nos.(f) MCCB 4 Pole, 415V Adjustable type,63 Amp with breaking capacity 16 KA - 01 nos. (g) Automatic Star & Delta starter fabricated with heavy duty AC3 Contactor of rating 70 amp, suitable motor protection relay for 30 Hp/22KW motor including single phase preventer, timer, NO/NC contact, Push button(ON/OFF), indication lamp, etc., complete in all respect and as directed -qty.01 no. (h) Automatic Star & Delta starter fabricated with heavy duty AC3 Contactor of rating 110 amp, suitable motor protecion relay for 72 Hp/55KW motor including single phase preventer, timer, NO/NC contact, Push button(ON/OFF), indication lamp, etc., complete in all respect and as directed -qty.04 nos. Note:- Provision of amper meter digital type in each starter.

(For Pump D II) All as above in Sl. no. 29 but (a) Bus bar copper - 400A capacity (current rating of bus bar to be calculated assuming 1.67amp per sqmm maximum) having a (3Ph + 1N) high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (Incoming & out going) (b) MCCB 4 POLE, 415v with microprocessor release 400 Amp. With breaking capacity 36 KA (Main Incommer)-01 no. (c) MCCB 3 POLE, 415V Adjustable type, 160 Amps with breaking capacity 36 KA-04 nos. (d) Automatic Star & Delta starter fabricated with heavy duty AC3 contactor of rating 110 amp, suitable motor protection relay for 72 Hp/55KW motor including single phase preventer, timer, NO/NC contact, Push button (ON/OFF), indication lamp, etc., complete in all respect and as directed-qty-04 nos. Note:- Provision of amp. meter digital type in each starter.

(For Pump B I) All as above in Sl. no. 29 but (a) Bus bar copper - 400A capacity (current rating of bus bar to be calculated assuming 1.67amp per sqmm maximum) having a (3Ph + 1N) high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (Incoming & out going) (b.) MCCB 4 POLE, 415V,with microprocessor release 300 Amp. With breaking capacity 36 KA (Main Incommer)- 01 no. (c) MCCB 3 POLE, 415V Adjustable type, 100 Amps with breaking capacity 16 KA - 05 nos. (d) MCCB 4 Pole, 415V,Adjustable type, 63 Amp with breaking capacity 16 KA - 02 nos. (e) Automatic Star & Delta starter fabricated with heavy duty AC3 contactor of rating 70 amp, suitable motor protection relay for 40 Hp/30KW motor Including single phase preventer, timer, NO/NC contact, Push button(ON/OFF), Indication lamp, etc., complete in all respect and as directed -qty.03 nos. (f) Automatic Star & Delta starter fabricated with heavy duty AC3 contactor of rating 70 amp, suitable motor protection relay for 30 Hp/22KW motor including single phase preventer, timer, NO/NC contact, Push button(ON/OFF), indication lamp, etc., complete in all respect and as directed-qty.01 no. Note:- For every motor has to be used amp. meter(digital). Note :- Provision of amper meter digital type in each starter .

(For Pump B II) All as above in Sl. no. 29 but (a) Bus bar copper - 200A capacity(current rating of bus bar to be calculated assuming 1.67amp per sqmm maximum) having a (3Ph + 1N) high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (Incoming & out going) (b) MCCB 4 POLE, 415V, Adjustable type, 160 Amps with breaking capacity 36 KA -01 no. (Main Incommer). (c) MCCB 3 POLE, 415V, Adjustable type, 63 Amps with breaking capacity 16 KA - 02 nos. (d) MCCB 4 Pole, 415V, Adjustable type,63 Amp with breaking capacity 16 KA - 01 no. (e) Automatic Star & Delta starter fabricated with heavy duty AC3 Contactor of rating 70 amp, suitable motor protection relay for 30 Hp/22KW motor including single phase preventer, timer, NO/NC contact, Push button(ON/OFF), indication lamp, etc., complete in all respect and as directed -qty .02 nos. Note :- Provision of amp. meter digital type in each starter .

Dismantling of existing power panels (CFS, MCCB, MCB, Bus bar, CT's, all meters, Panel to starter LT cable & starter to motor LT cable of different size) and removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors,etc.

Dismantling of existing Starters of different rating and removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors,etc.

Installation, commissioning of power panel including connection of all incoming and out going cables in panel and out going cable for all switches and motors with suitable size/ratings available in the pump house. Motor/switch with suitable size of glanding & lugs and as directed by EIC/WIC and testing on satisfactory completion of work.

S& f of cable jointing kit for 1100 volts(earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core PVC armoured aluminium conductor cable of size 240 sqmm. Make-: 3M/Mahindra/Denson.

m/s sagar electricals (BID ID -841660)

M/S- Kanhaya Electric Works (BID ID -840449)