Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹33,600
Closing Date
24 Aug 2026, 3:00 pmDue tomorrow
EE SDW VII
NSTP Coronation Pillar
Repair Renovation of Upadhaya make sluice valves installed at Narela SPS
2026_DJB_297031_12
NIT No 7 (2026-27)
Open Tender
Miscellaneous Works
Works
120 days
NSTP Coronation Pillar
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Online
₹33,600
14 Aug 2026
14 Aug 2026
24 Aug 2026
14 Aug 2026
24 Aug 2026
14 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Repair/ Renovation of Upadhaya Make delivery Sluice Valve of size 400mm Dia. of Pump set no -3 at Narela SPS by carrying out the following works:-
Safety equipment’s & Scaffolding equipment’s have to be arranged for the workers as the work has to be done up to the height of Sluice Valve from the ground level. The same includes loading, unloading & cartage charges etc. | 1 | Job | - | - |
| 1.02 | Removing of wheel along from the sluice valve stem, Opening/cutting of all nut bolts/studs of upper dome (Bonnet) of sluice valve body, Yoke and Gland Plate bolts. | 1 | Job | - | - |
| 1.03 | Lifting of Yoke & bonnet with the help of lifting system & manual labour arrangement to take it to safer place in the pump house as per site requirement. | 1 | Job | - | - |
| 1.04 | Taking out complete wedge from the Sluice Valve body by lifting with the help of Wire rope hoist & manual labour arrangement. Cleaning of body seat rings of Sluice Valve from inside by chemical solution and polishing by manual arrangement. Cleaning of Sluice Valve wedge facing rings by chemical solution, emery paper etc. and polishing as required. | 1 | Job | - | - |
| 1.05 | Repairing of side grooves of the sluice valve body and side ribs of wedge for smooth functioning of wedge in up and down movement | 1 | Job | - | - |
| 1.06 | Closing of Sluice valve from top by providing & fixing of blank flange on the top of sluice valve. | 1 | Job | - | - |
| 1.07 | Repairing of Spindle holder seat on the wedge by cutting of worn out seat and machining and making of new collar seat on the wedge. | 1 | Job | - | - |
| 1.08 | Renovation of Yoke Sleeve collar seat by cutting of all worn out seat and making of new collar seat on the yoke of sluice valve body. | 1 | Job | - | - |
| 1.09 | Supply of T bolts. (C.S) | 2 | Nos | - | - |
| 1.1 | Supply of Gasket for bonnet. (Rubber IS :638 Type-B) | 1 | Set | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_395654.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].