SITC of 40 Nos. 1.5TR, 5 star, Inverter type Split AC units for Raman Hostel at ALTTC Campus, Ghaziabad (Left Wing) (SH- Associated work)

Supplying and fixing 2 way sheet steel enclosure dust protected, duly powder painted with 20 amps "C" curve, SP&N MCB on surface or in recess complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4 Way TPN DB made of sheet steel on surface/ recess having IP 42 & 43 protection double metal door complete with all standard accessories, inter connection i/c painting earthing etc. as required. [M/s Legrand Cat No. 507670]

Supplying and fixing of Cable End Box on the top or bottom of the DB etc. as required. [M/s Legrand Cat No. 507916]

S/Fixing of following rating MCBs in the existing MCB DB and enclosure complete with connection, testing & commissioning etc. as required. (M/s Legrand make) (a) 5-32 Amp SP MCB –‘C’ Series

(b) 100 Amp Four pole Isolator

(c ) Blanking Plate

Supplying, installing. Testing & commissioning of dust & vermin proof Floor mounted cubical type LT Panel fabricated out of 2 mm C.R.C.A. sheet with suitable size frame, hinged type door, front openable cable alley/powder coating after treatment of CRCA sheet, sign writing connection with following outgoing as well incoming feeders and incorporating the following accessories as per the specification attached (i) 250 Amp Alum. bus bar 4 strip supported on SMC insulator for 3 phase and neutral (ii) Two Nos. earth studs with 25 mm x 5 mm Al. bus bar across the panel for the earth connection (iii) Panel mounted on M.S. channel of 75mm x 50mm x 5mm thick A) IN COMMER : (i) 250 Amp 4 Pole MCCB, 36 KA breaking capacity, release range (200-250 A) [M/s L&T DN2-250D make] - (01 No.) (ii) DN2 Direct Rotary handle - (01 No.) (iii) Digital Voltmeter with VSS - (01 No.) (iv) Digital ammeter i/c ASS & 3 Nos. suitable size CT's - (01 No.) (v) LEDs type 25 mm dia Indication lamp with HRC fuses backlite base for 3 (R-Y-B) - 01 No. B) OUT GOING : (i) 100 Amp 4 Pole MCCB, 36 KA breaking capacity, release range (80-100 A) [M/s L&T DN0-100D make] - 05 Nos. (ii) DN0 Direct Rotary handle - 05 Nos. [Note:- (1) Panel shall be got manufactured from a CPRI approved Panel Manufacturer. (2) The panel will be painted in "SIEMENS GRAY" Colour. (3) The drawing of the panel shall be got approved by Engineer-in-charge before fabrication.]

Laying of one no. PVC insulated and PVS sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a) Above 35 sq. mm and upto 95 sq. mm (clamped with 25 x 3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (a) Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3½ X 50 sq. mm (35mm)

(b) 3½ X 150 sq. mm (50mm)

Providing & Fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/ cable as required.

Supplying of 3½ X 50 sq. mm PVC insulated PVC sheathed Al. conductor armored cable of 1.1 KV grade etc. complete as required.

Supplying and laying of 3 x 2.5 Sqmm copper conductor PVC insulated PVC sheathed XLPE armoured power cable of 1.1 KV grade on surface of wall i/c making connection etc. complete as required.

I.T.C of 250 / 400 Amp TP MCCB in the existing feeder piller and making the incomming connection with 3.5 x 240 Sqmm PVC insulated PVC sheeted Aluminium Cond. Armoured cable i/c making end termination with suitable size thimble, making connection, testing etc complete as reqd.

Transportaion charges of 3.5 x 150 Sqmm Aluminium cond. power cable Approx. 360 mtrs. from BSNL store at Meerut to ALTTC, Ghaziabad i/c loading / unloading from the vehicle and safe transportation etc complete as reqd.

Supply and Laying of 100 mm dia 'A' class G.I pipe for crossing the road i/c cutting of RCC road, excavation and repairing the road after laying etc. complete as reqd. (M/S TATA, JINDAL or S.S make)

bindal electricals & engineers