Repair to wooden and steel furniture including re-canning, weaving, painting etc at AF Stn Darbhanga under GE (AF) Bihta.

Amount

Bed Hard (FD-246) :- Repair of bed hard by replacing the following items as under and providing one with high glossy french polish to all wooden exposed surface complete all as shown on drawing.:- (a) Removing u/s ply wood top and S & F of new plywood 12 mm thick commercial type best quality ISI marked all as specified & directed.

(b) Removing u/s both side plywood and edging from head board of bed and S & F of new plywood 3.5 mm thick one side decorated with teak wood edging complete all as specified & directed.

(c) Removing u/s legs and S & F of new legs made with teak wood and tightening of legs with new bracket of teak wood as specified & directed.

(d) Removing u/s long rails and S & F of new long rails made with teak wood as per existing complete all as specified & directed.

Table Dining 6 Person (FD-273):- Taking out U/S components of table dinning 6 per and S & F new components made of 1st class hard wood (well seasoned shisham wood) incl fixing elements and applying french polish on all exposed surfaces to the colour match with existing, incl PVC toe/shoe, rest all as specified and shown on drgs. (a) Removing u/s legs and S & F of new legs made with teak wood and tightening of legs with shisham wood bracket of required size as specified & directed.

(b) Removing u/s long rail and S & F of new long rail as specified & directed.

(c) Removing u/s short rail and S & F of new short rail as specified & directed.

(d) Removing u/s top and S & F of new top made out with 18 mm thick pre-laminated particle board with teak wood edging as specified & directed.

Table 900 x 600 (FD-284) :- Taking out U/S components of table 900 x 600 mm with or w/o drawer and S & F new components made of 1st class hard wood (well seasoned shisham wood) incl fixing elements and applying french polish after preparation on all exposed surface in the colour to match with existing, including PVC toe, complete all as specified and directed and shown on drg:- (a) Removing u/s legs from table frame and S & F of new legs as specified & directed.

(b) Removing u/s long rail from table frame and S & F of new long rail made with teak wood as specified & directed.

(c) Removing u/s top and S & F of new top made with 18 mm thick prelaminated particle board with teak wood edging as specified & directed.

Table Peg (FD-236) :- Taking out U/S components of table peg and S & F new components made of 1st class hard wood (well seasoned shisham wood) incl necessary fixing elements and french polish on all exposed surfaces to match with existing colour, incl PVC toe/shoe rest all as specified and shown drg. (a) Removing u/s legs and S & Fof new legs as specified & directed.

(b) Removing u/s rail and S & F of new rail as specified & directed.

(c) Removing u/s top and S & F of new rail top made with 18 mm thick prelaminated particle board with teak wood edging as specified & directed.

Table Centre (FD- 274) :- Taking out U/S components of Table Centre and S&F new components made of 1st class H.W (well seasoned shisham wood) incl fixing elements and applying French polish on all exposed surface to the colour match with existing, incl PVC toe, rest all as specified and shown on drg:- (a) Removing u/s legs and S&Fof new legs as specified & directed.

(b) Removing u/s long rail and S&F of new long rail as specified & directed.

(c) Removing u/s top and S&F of new top made with 18 mm thick pre-laminated particle board with teak wood edging as specified & directed.

Chair Dining(FD-279):- Taking out unserviceable components of Chair Dining and S&F new components made of 1st class hardwood (well seasoned shisham wood) including. necessary fixing elements and applying one coat of French polish after preparation of exposed surface to match the colour of existing complete incl PVC shoe/toe rgt all as specified and shown on drg:- (a) Removing u/s rear legs and S &F of new rear leg as specified & directed.

(b) Removing u/s front legs and S&F of new front leg as specified & directed.

(c) Removing u/s side rail and S&F of new side rail as specified & directed

(d) Removing u/s stiffener and S&F of new stiffener as specified & directed

(e) Removing u/s canning bead and S&F of new canning bead as specified & directed

Chair Easy (FD-225, 108) :- Taking out unserviceable components of Chair Easy and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of French polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specified and shown on drg. (a) Removing u/s front legs and S & F of new front legs as specified & directed.

(b) Removing u/s rear leg and S & F of new rear leg as specified & directed.

(c) Removing u/s cane bead and S & F of new cane bead as specified & directed.

(d) Removing u/s back and front rail and S & F of new back and front and front rail as specified & directed.

(e) Removing u/s arm and S & F of new arm as specified & directed.

Sofa Set 5 Seater(FD-281) :- Taking out unserviceable components of Sofa Set 5 Seater and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specifed and shown on drg:- (a) Removing u/s legs and S & F of new legs as specified & directed.

(b) Removing u/s long rail and S & F of new long rail as specified & directed.

(c) Removing u/s short rail and S & F of new short rail as specified & directed.

(d) Removing u/s arms and S & F of new arms as specified & directed.

(e) Replacing of old and u/s foam detatchable cushion and cover of sofa (5 seater) and S & F new best quality 100 mm thick synthetic foam, density of 32 mm with tapestry cloth (Ranges & colour of cloth minimum @ Rs 260/- per mtr or as approved by GE (AF) Bihta.

(f) Replacing of back (size-535 mm) of best quality 100 mm thick synthetic foam density of 32 mm with tapestry cloth (Ranges & colour of cloth @ Rs 260/- per mtr minimum or as approved by GE (AF) Bihta

Table Bed Side(FD-276, 248):- Taking out unserviceable components of Table Bed Side and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specifed and shown on drg:- (a) Removing u/s top and S & F of new top made with 18 mm thick prelaminated particle board as specified & directed.

(b) Removing u/s leg and S & F of new leg as specified & directed.

(c) Removing u/s back ply and S & F of new back ply 6mm thick commercial type as specified & directed.

Bin Soil Linen(FD-244):- Taking out unserviceable components of Bin Soil Linen and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specified and shown on drg:- (a) Removing u/s plywood top and S & F new ply wood top made with 6 mm thick with one side decorative all as specified & directed.

(b) Removing u/s bottom portion and S & F of new bottom portion as per drawing with 12 mm thick 1st HW plank as specified & directed.

(c) Removing u/s leg and S & F of new leg as specified & directed.

Stool Dressing CB (FD-374):- Taking out unserviceable components of Stool Dressing CB and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specified and shown on drg:- (a) Removing u/s long rail and S & F of new long rail as per drg as specified & directed.

(b) Removing u/s short rail and S & F of new short rail as per drg as specified & directed.

(c) Removing u/s leg and S&F of new leg as per drg, as specified & directed.

Table Writing (FD-275/246 & 249):- Taking out unserviceable components of table writing and S & F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete. (a) Removing u/s top and S&F of new top made with 18 mm thick prelaminated particle board conforming to IS with teak wood edging as specified & directed.

(b) Removing u/s ply wood from drawer box and S&F of new drawer box made with 6 mm thick new ply wood commercial type ISI marked as specified & directed.

(c) Removing u/s ply wood from drawer and S&F of 6 mm thick new ply wood and tightening of front portion of drawer as specified & directed.

(d) Removing u/s knob and S&Fof new CP knob 40 x 40 mm size as specified & directed.

(e) Removing u/s legs and S&F new legs all as directed and specified.

Table 3'x2' w/drawer (FD-283):- Taking out unserviceable components of table 3'x 2' w/drawer and S&F new components made of 1st class hardwood (well seasoned shisham wood) including necessary fixing elements and applying one coat of french polish after preparation of exposed surface to match the colour of existing, incl pvc shoe/toe complete all as specified and shown on drg:- (a) Removing u/s top and S&F of new top made with 18 mm thick prelaminated particle board with teak wood edging as specified & directed.

(b) Removing u/s legs and S&F of new legs as specified & directed.

(c) Removing u/s rail and S&F of new rail as specified & directed.

Table Dining 8 Person (FD-273) :- Taking out U/S components of table dinning 8 per and S & F new components made of 1st class hard wood (well seasoned shisham wood) incl fixing elements and applying french polish on all exposed surfaces to the colour match with existing, incl PVC toe/shoe, rest all as specified and shown on drgs:- (a) Removing u/s top and S&F of new top made with 18 mm thick pre-laminated particle board with teak wood edging as specified & directed.

(b) Removing u/s long rail and S&F of new long rail as specified & directed.

(c) Removing u/s short rails and S&F of new short rails as specified & directed.

(d) Removing u/s legs and S&F of new legs as specified & directed.

Foam cushion with tapastry cloth of sofa set 4/5 seater (FD-281):- (a) Replacing of seat (size-560 mm) of bestquality 100 mm thick synthetic foam with tapestry cloth (Ranges of cloth @ Rs 260/- per mtr minimum or as approved by GE (AF) Bihta.

(b) Replacing of back (size-535 mm) of bestquality 100 mm thick synthetic foam with tapestry cloth (Ranges of cloth @ Rs 260/- per mtr mtr minimum or as approved by GE (AF) Bihta.

(FD-225/279) Removing u/s cane plastic from chair of any sorts and recaining of chair with 2 mm wide cane plastic half round as per godrej pattern Make Premier or as approved by best quality by GE, rest as per drg and directed.

(FD : 333) Removing u/s cane plastic from chair verandah and reweaving the same with new plastic cane 2 mm dir weaving in godrej pattern with border of 4mm dia cane plastic of best quality complete. Make Premier or as approved of best quality by GE, rest as per drg and directed.

Polishing of Wooden Furniture:- Preparation of old polished wooden surface by scrapping, rubbing and removing old polish, putty, stains etc. and cleaning as required apply fill the woods/ cracks etc by putting yellow ochre etc. So as to achieve proper surface for polishing. Apply high class glossy French polish/Sprit polish to achieve high standard all as specified and as directed by Engineer-in-Charge. Bed Hard (FD-246)

Table Dining 6/8 Person (FD-273)

Table 900x600 (FD-284)

Table Peg (FD-236)

Table Centre (FD-274)

Chair Dining(FD-279)

Chair Easy (FD-225)

Sofa Set 5 Seater(FD-281)

Table Bed Side(FD-276)

Bin Soil Linen(FD-244)

Stool Dressing CB(FD-374)

Table Writing (FD-275/246)

Table 3'x2' w/drawer (FD-283)

Locker Bed Side Steel (FD-1029) :- (a) Removing U/S legs from locker steel and S & F new legs of reqd size of 1mm thick MS sheet complete all as directed and shown on drg.

(b) Removing U/S shutter from locker steel and provn of new shutter of reqd size of 1mm thick MS sheet complete all as directed and shown on drg.

(c) Removing old U/S locking assambly and S&F of new locking assambly complete with handle, lock, lock plate all as directed and as per drg.

(d) Removing old U/S bow handle & Hasp stapple and S & F new bow handle & Hasp stapple all as per drg and directed by Enginer -in- charge.

Chair CB Steel with arm (FD-75):- (a) Removing old U/S seat and S&F new seat of best quality of Ist class hard wood (shisham) frame seat duly canned with 2mm wide half round plastic cane, white and fixing of MS strip 12mmx2mmx485mm long at the bottom of seat. Rest all as drg.

(b) Removing old U/S back and S&F new back of best quality of Ist class hard wood (shisham) frame back duly canned with 2mm wide half round plastic cane, white and fixing of MS strip 12mm x 2mm x 485 mm long at the back. Rest all as drg.

(c) Removing old U/S handle of chair steel with arms and S&F handle made out of Ist class hard wood (shisham) duly black painted all as per drg & directed.

Book Case LP Steel (FD-1028, 336):- (a) Removing U/S legs from exisiting place and S & F new legs made out of MS sheet 1mm thick all as per drg & directed by Engineer - in -charge.

(b) Removing old U/S lock and S &F new brass lock with duplicate key of godrej pattern all as per drg, and directed by Engineer - in- charge.

(c) Reviting / Gas welding of existing shelves all as per drg and directed by Engineer - in - charge.

Charpoy GI Pipe (FD-220):- (a) Removing unsv nylon newar from charpoy GI Pipe tighting the complete charpoy i.e loose check nuts, elbows long rail, short rails and S&F of new ply wood of size 1980 x 920mm x 12mm thick of kit ply/national ply wood on top with galvanished iron nuts and bolts 6mm dia of 70mm long total 10 nos with washer on underside before tighting the nuts including provision of check nut, ply wood shall be supported on one nos GI stiffner made out of 40x6mm flat iron fixed with nut & bolt at center of the charpoy complete all as specified and directed by Engr-in-Charge.

(b) Removing old U/S ply wood from charpoy GI pipe tightning the complete i.e.loose chuck nut , elbow , long rail , short rail and S&F of new ply wood of size 1980 x 920mm x 12mm thick of kit ply/national ply wood on top with galvanised iron nuts and bolts 6mm dia of 70mm long total 10 nos with washer on underside before tighting the nuts including provision of check nut, ply wood shall be supported on one nos GI stiffner made out of 40 x 6mm flat iron fixed with nut & bolt at center of the charpoy complete all as specified and directed by Engr-in-Charge.

(c) Dismantling by unscrewing old existing long rail from the existing frame of charpoy GI pipe and supply and fixing of long rail 32 mm nominal bore (medium grade) including threading on both ends with fittings in the frame all as sfd and directed and shown in drg No FD-220. Make : TATA/Jindal /surya prakash.

(d) Dismantling by unscrewing unserviceable, existing short rail and cutting the old GI Pipe as retrieved from item ser No 3 above in before to the required size of short rail of charpoy GI pipe and threading at both ends and fitting the frame all as specified and shown on drg ..

(e) Cutting the existing old GI pipe as retrieved from item ser No 4 (c) & 4 (d) above in before to the required size of legs of charpoy GI Pipe and threading at both ends and provided a cap fitting to the frame all as specified and shown on drg.

(f) Supply and fixing elbow 32 mm bore three way medium grade ISI marked to the frame of charpoy GI pipe including taking out unsv old existing cracked/broken elbow all as specified directed and shown on drg .

(g) S & F of 32 mm bore check nut to the frame of charpoy GI pipe of medium grade ISI marked including taking out unsv old existing cracked/broken check nuts all as specified and shown on drg.

(h) Supply and Fixing of GI caps 32 mm bore medium grade to the legs of charpoy including taking out cracked/broken GI caps all as specified and shown on drg.

Chair Revolving for computer(TP):- (a) Removing old U/S seat of chair computer and S & F new seat duly covered with tepestry cloth all as per trade original shape and directed by GE/ Engineer in charge.

(b) Removing old U/S back of chair computer and S& F of new back duly covered with tepestry cloth all as per trade and directed by Engineer in charge.

(c) Removing old U/S wheel base and S & F new wheel base with wheel and get set readly smoth function of chair all as directed by GE/ Engineer in charge.

(d) Removing old U/S Hydroulic system and S&F new Hydroulic system to smooth function as per original shape all as directed by GE / Engineer in charge.

Almirah Med Steel (FD-1032):- (a) Riveting / Gas welding of existing shelves to exiting Almirah with providing new rivet complete all as directed.

(b) Removing u/s legs from existing place and S & F of new legs with mild sheet of reqd size. Legs shall be made of MS sheet 1 mm thick as per drg.

(c) S & F in repair bottom sheet of size 485 x 920mm made out of 1mm thick MS sheet as per drawing.

(d) Removing old U/S locking assambly and S&F of new locking assambly complete with handle, lock, lock plate all as directed and as per drg.

Running welding in repair to steel furniture by removing bends, broken members shall be welded to existing places welded portion shall be furnished by grinding , rubbing and shall be applied with one coat of synthetic enamel paint to match with existing surface after preparation of surface over one coat of red oxide primer.

Chair Verandah (FD-259/333):- Removing of U/S old cane plastic from chair verandah and Re- canning of chair verandah with 4mm thick new white cane plastic half round with mat pattern after applying one coat of white paint and 4 Nos PVC cap to chair verandah complete all as per drg and as directed.

Table office clerk steel(FD-84/1004):- (a) Removing old U/S top and S & F new top made with 18mm thick prelaminated board exterior grade type II confirming to IS 12823 with teak wood edging complete all as directed and shown on drg.

(b) Removing old U/S handle and U/S lock and S&F in new handle and lock of reqd size as per drg complete all as directed and shown on drg.

Almirah Large Steel (FD-1031): - (a) Riveting/Gas welding of existing shelves to exiting Almirah with providing new rivet complete all as directed & as per drg.

(b) Removing u/s legs from existing place and S & F of new legs with mild sheet of reqd size. Legs shall be made of MS sheet 1 mm thick as per drg.

(c) Removing old U/S locking assambly and S&F of new locking assambly complete with handle, lock , lock plate all as directed and as per drg.

Computer Table(FD/E6/MAP/03):- (a) Removing old U/S top and S & F new top made with 18mm thick prelaminated board exterior grade type II confirming to IS 12823 with teak wood edging complete all as directed and shown on drg.

Painting of steel furniture:- Preparation of surface by way of scrapping, rubbing, cleaning, removing old paint stain etc and applying one coat synthetic enamel paint of required shade as approved by spray painting. FD-1031 (a) Almirah large steel

FD-1032 (b) Almirah Med steel

FD-90 (c) Book case L/P steel

FD-84 (d) Table office clerk steel

FD-84 (e) Table office officer steel

FD-75 (f) Chair CB steel with arm

FD-75 (g) Chair CB Steel with out Arm

FD-127 (h) Locker Bed side steel

FD-90 (j) Book shelf open small

(k) Book shelf open large

(l) Table Writing steel

A K C PROJECT

PRAFUL ENTERPRISES