Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC KERNI MARKET COURT ROAD UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹23.9 L+₹2.4 L (11.0%)Rejected-Finance NEW HOSPITAL ROAD UDHAMPUR UDHAMPUR UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹31.8 L+₹10.2 L (47.7%)Rejected-Finance B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹34.9 L+₹13.4 L (62.2%)Rejected-Finance SUBASH NAGAR W NO 5 H NO 354 BEHIND SBI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹38.4 L+₹16.9 L (78.6%)Rejected-Finance WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance BEING L5 |
| Sl No | Description | Qty | Unit | SHIVAE CONSTRUCTION L6 | ASIA BUILDER L7 | ANIKET TRADERS L3 | APARANA ENTERPRISES L4 | kerni electricals L1 | DAVINDER SINGH L5 | MAHAJAN TRADING CO L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for replacement of Distance to go markers with the following specifications and as directed: Distance to go markers shall have three sides arranged in triangular shape. Black aluminium composite panel(ACP)/Polycarbonate Panel of 3 mm thick to be used for fabrication of vertical faces of the markers.These panels are to be screwed/bolted individually on the three aluminium metal frames to form two vertical faces. Aluminium metal pipes at the three corners of the markers are to be of 1500 mm i.e. 300 mm longer than the vertical faces. The mounting leg pipes are to be screwed/bolted in MS plates 200 mm x 200 mmx 6 mm thick fixed on the post hole 300 x 300 x 450 mm (PCC 1:3:6) including excavation in any type of soil. The vertical faces of the DTGM will be 1200 mm on DTGM face, a margin of 100 mm to be left from top and bottom, thereafter the inner 1000 mm x 1000 mm area will be used for writing the numerals/letter with red retro reflecting tape. The height of the letter/numeral to be 1000 mm whereas the width would vary for each letter/numeral; the same needs to be evenly distributed by leaving equal margin on both sides. | 32 | Each | 50,000 ₹16,00,000 | 18,000 ₹5,76,000 | 28,500 ₹9,12,000 | 47,000 ₹15,04,000 | 23,000 ₹7,36,000 | 45,000 ₹14,40,000 | 15,000 ₹4,80,000 Lowest |
| 2.00 | M&L for replacement of existing sign board of any size with double sided sign boards with following specifications or as directed by Engineer-in-Charge:- (a) Body of the Sign boards cabinet of size exc 2.50 Sqm and n exc 3.00 Sqm to be manufactured from a corrosive resistant extruded aluminium section of size not less than 63.50 mm x 38.10 mm x 1.20 mm thick interlocked with cross members and side panels of suitable sizes. (b) Polycarbonate sheet not less than 3 mm thick to be fixed with aluminium/stainless steel screws on either face of the cabinet. The other faces of the cabinet are to be sealed/covered with same polycarbonate sheet. (c) The height of bottom side of board shall be 300 mm above ground level . (d) The frangible legs of aluminium pipes minimum 5 in numbers of suitable hollow section are to be screwed/bolted on MS plate of size 200 mm x 200 mm x 4 mm thick embedded in PCC 1:3:6 post holes of size 300 mm x 300 mm x 300 mm incl necessary earth work . (e) The colour of the polycarbonate sheet shall be Red/Yellow//Black/White. | 7 | Each | 50,000 ₹3,50,000 | 35,000 ₹2,45,000 | 75,000 ₹5,25,000 | 36,000 ₹2,52,000 | 27,000 ₹1,89,000 | 45,000 ₹3,15,000 | 18,000 ₹1,26,000 Lowest |
| 3.00 | M&L for replacement of existing sign board of any size with double sided sign boards with following specifications or as directed by Engineer-in-Charge:- (a) Body of the Sign boards cabinet of size exc 0.60 Sqm and n exc 0.90 Sqm to be manufactured from a corrosive resistant extruded aluminium section of size not less than 63.50 mm x 38.10 mm x 1.20 mm thick interlocked with cross members and side panels of suitable sizes. (b) Polycarbonate sheet not less than 3 mm thick to be fixed with aluminium/stainless steel screws on either face of the cabinet. The other faces of the cabinet are to be sealed/covered with same polycarbonate sheet. (c) The height of bottom side of board shall be 300 mm above ground level . (d) The frangible legs of aluminium pipes 2 in numbers of suitable hollow section are to be screwed/bolted on MS plate of size 200 mm x 200 mm x 4 mm thick embedded in PCC 1:3:6 post holes of size 300 mm x 300 mm x 300 mm incl necessary earth work . (e) The colour of the polycarbonate sheet shall be Red/Yellow//Black/White. Notes: (item No 1, 2 & 3) Before procurement/supply, sample of board shall be produced by the contractor for approval of GE/user. Tenderer may see the sketch/drg of the sign boards and DTGM in the sub division before qouting the rates. Sign boards and DTGMs are required to be frangible and should be designed to withstand the static and operational wind or jet blast loads with a suitable factor of safety but should break, distort or yield readily when subjected to the sudden collision forces of a 3000 Kg aircraft airborne and travelling at 140 km/h or moving on the ground at 50 km/h | 11 | Each | 25,000 ₹2,75,000 | 14,000 ₹1,54,000 | 32,000 ₹3,52,000 | 18,000 ₹1,98,000 | 11,000 ₹1,21,000 Lowest | 1,00,000 ₹11,00,000 | 13,000 ₹1,43,000 |
| 4.00 | M & L 100 mm thick PCC 1:3:6 in floors finished even and smooth without using extra cement below Sign boards and DTGMs | 82 | Sqm | 500 ₹41,000 | 300 ₹24,600 | 200 ₹16,400 Lowest | 250 ₹20,500 | 300 ₹24,600 | 200 ₹16,400 Lowest | 350 ₹28,700 |
| 5.00 | Complete removal of old paint of any description by paint removers or burning off by blow lamps, with wire brushes/grinders and cleaning with scrapers any number of coats, any width or girth on PCC surfaces to the maximum extent without disturbing the top finished surface of PCC to the satisfaction of users all as specified and directed. | 2,500 | Sqm | 25 ₹62,500 | 60 ₹1,50,000 | 20 ₹50,000 Lowest | 45 ₹1,12,500 | 20 ₹50,000 Lowest | 50 ₹1,25,000 | 200 ₹5,00,000 |
| 6.00 | Excavating over area n exc 1.5 m deep and getting out in soft/loose soil | 2,000 | Cum | 190 ₹3,80,000 | 200 ₹4,00,000 | 140 ₹2,80,000 | 126 ₹2,52,000 | 250 ₹5,00,000 | 60 ₹1,20,000 Lowest | 100 ₹2,00,000 |
| 7.00 | Removing excavated material exc 5 km but n exc 10 km and depositing where directed | 2,000 | Cum | 150 ₹3,00,000 | 100 ₹2,00,000 | 200 ₹4,00,000 | 190 ₹3,80,000 | 25 ₹50,000 Lowest | 75 ₹1,50,000 | 100 ₹2,00,000 |
| 8.00 | Forming embankment including raising (or lowering) earth, spreading in layers n exc 30 cm thick, watering, ramming /rolling and finishing to required size, shape etc, n. exc. 1.5 m high from base. | 2,000 | Cum | 180 ₹3,60,000 | 50 ₹1,00,000 | 100 ₹2,00,000 | 77 ₹1,54,000 | 35 ₹70,000 Lowest | 50 ₹1,00,000 | 200 ₹4,00,000 |
| 9.00 | Supply only fine aggragate (sand) stone/dust free as approved | 200 | Cum | 1,900 ₹3,80,000 | 3,200 ₹6,40,000 | 1,800 ₹3,60,000 | 2,000 ₹4,00,000 | 450 ₹90,000 Lowest | 2,000 ₹4,00,000 | 1,300 ₹2,60,000 |
| 10.00 | Spreading and levelling earth/sand in layer n exc 25cm thick in layer complete al as specified and directed. | 200 | Cum | 50 ₹10,000 Lowest | 2,200 ₹4,40,000 | 100 ₹20,000 | 171 ₹34,200 | 100 ₹20,000 | 70 ₹14,000 | 100 ₹20,000 |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
11 Jul 2025, 6:00 pmClosed
GE (AF) UDHAMPUR
GE (AF) STATION UDHAMPUR
REPAIR/REPLACEMENT OF SIGN BOARDS/DTGM, EARTH FILLING/LEVELLING ON SHOULDERS OF RUNWAY/TAXI TRACKS/PTT/LINKS/DISPERSALS ETC INCLUDING SAND FILLING AND PLOUGHING OF SGA AND OTHER RELATED WORKS AT AF STN UDHAMPUR
2025_MES_714461_1
GEAFU-16/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) STATION UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) UDHAMPUR
₹96,000
7 Aug 2025
13 Jun 2025
14 Jul 2025
13 Jun 2025
11 Jul 2025
27 Jun 2025
13 Jun 2025 - 20 Jun 2025
Amount
M & L for replacement of Distance to go markers with the following specifications and as directed: Distance to go markers shall have three sides arranged in triangular shape. Black aluminium composite panel(ACP)/Polycarbonate Panel of 3 mm thick to be used for fabrication of vertical faces of the markers.These panels are to be screwed/bolted individually on the three aluminium metal frames to form two vertical faces. Aluminium metal pipes at the three corners of the markers are to be of 1500 mm i.e. 300 mm longer than the vertical faces. The mounting leg pipes are to be screwed/bolted in MS plates 200 mm x 200 mmx 6 mm thick fixed on the post hole 300 x 300 x 450 mm (PCC 1:3:6) including excavation in any type of soil. The vertical faces of the DTGM will be 1200 mm on DTGM face, a margin of 100 mm to be left from top and bottom, thereafter the inner 1000 mm x 1000 mm area will be used for writing the numerals/letter with red retro reflecting tape. The height of the letter/numeral to be 1000 mm whereas the width would vary for each letter/numeral; the same needs to be evenly distributed by leaving equal margin on both sides.
M&L for replacement of existing sign board of any size with double sided sign boards with following specifications or as directed by Engineer-in-Charge:- (a) Body of the Sign boards cabinet of size exc 2.50 Sqm and n exc 3.00 Sqm to be manufactured from a corrosive resistant extruded aluminium section of size not less than 63.50 mm x 38.10 mm x 1.20 mm thick interlocked with cross members and side panels of suitable sizes. (b) Polycarbonate sheet not less than 3 mm thick to be fixed with aluminium/stainless steel screws on either face of the cabinet. The other faces of the cabinet are to be sealed/covered with same polycarbonate sheet. (c) The height of bottom side of board shall be 300 mm above ground level . (d) The frangible legs of aluminium pipes minimum 5 in numbers of suitable hollow section are to be screwed/bolted on MS plate of size 200 mm x 200 mm x 4 mm thick embedded in PCC 1:3:6 post holes of size 300 mm x 300 mm x 300 mm incl necessary earth work . (e) The colour of the polycarbonate sheet shall be Red/Yellow//Black/White.
M&L for replacement of existing sign board of any size with double sided sign boards with following specifications or as directed by Engineer-in-Charge:- (a) Body of the Sign boards cabinet of size exc 0.60 Sqm and n exc 0.90 Sqm to be manufactured from a corrosive resistant extruded aluminium section of size not less than 63.50 mm x 38.10 mm x 1.20 mm thick interlocked with cross members and side panels of suitable sizes. (b) Polycarbonate sheet not less than 3 mm thick to be fixed with aluminium/stainless steel screws on either face of the cabinet. The other faces of the cabinet are to be sealed/covered with same polycarbonate sheet. (c) The height of bottom side of board shall be 300 mm above ground level . (d) The frangible legs of aluminium pipes 2 in numbers of suitable hollow section are to be screwed/bolted on MS plate of size 200 mm x 200 mm x 4 mm thick embedded in PCC 1:3:6 post holes of size 300 mm x 300 mm x 300 mm incl necessary earth work . (e) The colour of the polycarbonate sheet shall be Red/Yellow//Black/White. Notes: (item No 1, 2 & 3) Before procurement/supply, sample of board shall be produced by the contractor for approval of GE/user. Tenderer may see the sketch/drg of the sign boards and DTGM in the sub division before qouting the rates. Sign boards and DTGMs are required to be frangible and should be designed to withstand the static and operational wind or jet blast loads with a suitable factor of safety but should break, distort or yield readily when subjected to the sudden collision forces of a 3000 Kg aircraft airborne and travelling at 140 km/h or moving on the ground at 50 km/h
M & L 100 mm thick PCC 1:3:6 in floors finished even and smooth without using extra cement below Sign boards and DTGMs
Complete removal of old paint of any description by paint removers or burning off by blow lamps, with wire brushes/grinders and cleaning with scrapers any number of coats, any width or girth on PCC surfaces to the maximum extent without disturbing the top finished surface of PCC to the satisfaction of users all as specified and directed.
Excavating over area n exc 1.5 m deep and getting out in soft/loose soil
Removing excavated material exc 5 km but n exc 10 km and depositing where directed
Forming embankment including raising (or lowering) earth, spreading in layers n exc 30 cm thick, watering, ramming /rolling and finishing to required size, shape etc, n. exc. 1.5 m high from base.
Supply only fine aggragate (sand) stone/dust free as approved
Spreading and levelling earth/sand in layer n exc 25cm thick in layer complete al as specified and directed.
Ploughing of SGA not less than 30 cm in depth using plant & its connecting tools required for ploughing complete all as specified and directed.
MAHAJAN TRADING CO (BID ID -3355692)
ANIKET TRADERS (BID ID -3346420)
APARANA ENTERPRISES (BID ID -3340581)
DAVINDER SINGH (BID ID -3347166)
SHIVAE CONSTRUCTION (BID ID -3347094)
ASIA BUILDER (BID ID -3355085)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .