Karnataka

To Be Opened

Works

Lift Irrigation Scheme

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

Minor Irrigation Department

Minor Irrigation Division Dharwad | Dharwad, Karnataka

Amount: ₹80.5 LCloses: 3 Jun 2026Closed

Timeline

Published26 May 2026
Closed3 Jun 2026
Bid Opening5 Jun 2026

Tender Value

₹80.5 L

EMD Value

₹80,600

Closing Date

3 Jun 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

EE Devaraj k Shigganvi

Office Number

Mobile Number

Work Description

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT11291/CALL-2

Reference Number

MI/2025-26/LI/WORK_INDENT11291/CALL-2

Tender Type

Reserved

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Dharwad

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from Civil Engineering construction Work receipts only. for last 05 years i.e from 2021-22 to 2025-26

RequiredCompany/contract Registration Certificate KPWD License

RequiredSimilar Nature work done certificates for the last five year period issued by the officer not below the rank of Executive Engineer and counter signed by Superintending Engineer. for last 05 years i.e from 2021-22 to 2025-26

RequiredAudited Profit & Loss statements,Balance sheets,ITR copies Considering Yearly construction Work Receipts only issued by Chartered Accountant with UDIN is preferred. for last 05 years i.e from 2021-22 to 2025-26

RequiredDetails of Existing commitments and on-going works and which Tenders already submitted as per section 3 of Standard bid document K/W-2

RequiredAssessed Available Tender Capacity as per K/W-2

RequiredG.S.T. Registration certificate. & latest G.S.T. Returns filed document.

RequiredLine of Credit of not less than Rs.7.40 Lakhs Bankers certificate / LOC certificate should be in prescribed format, if not, then the Bid is liable to be rejected

RequiredST caste Certificate

RequiredDomicile Resident Certificate from Past 10 Years

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-3

Conditional Tenders will not be considered

All relevant documents as per the KW-3 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified.

Name, address, and Mobile number, telex, Email and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc.

The tenderer shall also disclose if there are any bankruptcy proceedings against him

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states)

A copy of GST registration certificate should be uploaded

The contractor shall quote the rates without adding GST for either materials or works contract (service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractors bid amount. tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. If the GST rates are revised during the contract period, Payment will be made/withdrawn accordingly. The increase if any in the GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the Authority.

Estimate rates are excluding GST as per Common SR 2024-25 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of lumpsum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are excluding GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly.

The period of completion is 06 (Six months) including monsoon

If any of the dates mentioned in this tender happens to be a general holiday, the next working day holds good.

Other details can be seen in the tender documents.

Omission and Typographical errors if any will not be the ground for any claims by the Contractor.

The Tenders are invited as per Standard tender Document KW-3 The Tenderer should adhere to all terms & conditions in the tender documents , Standard Specifications, and prevailing Government orders/ circulars.

The tenderer shall be eligible KPWD Registered contractor

Letter of Credit should be in prescribed format, if not, then the Bid is liable to be rejected

Star rates are to be adopted as per the period of completion of work.

This tender is reserved for ST

Technical Criteria

General

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactorily completed at least 90 Percent of the Contract value in last five years that is 2021-22 to 2025-26 as prime contractor at least one similar work such as Any Construction work to an extent of 25% of the cost of the work Rs.20.13 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer( if the work is done in other states)

Work Done Certificate

Satisfactorily completed at least 90 Percent of the Contract value in last five years that is 2021-22 to 2025-26as prime contractor at least one similar work such as Any Construction work to an extent of 25% of the cost of the work Rs.20.13 Lakhs. . Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer( if the work is done in other states)

Work Done Certificate

Executed in any one year, the following minimum quantities of work:(2021-22 to 2025-26)Earth Work (excavation including embankment)920.00Cum 2.Concrete Work (including P.C.C & R.C.C)23cum 3.vertical turbine pump 4.Electric Pole 8NOs.

Others -- Past Experience

Capabilities of Vendor

Assessed available tender capacity (AxNx5 - B) Where A- Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. Tender Inviting Authority N - Number of years prescribed for completion of the works for which Tenders are invited. B - Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 06/12 years (period of completion of the works for which Tenders are invited) Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Bid capacity calculation

Section 3, Qualification Information. As per K/W-3

Others -- Qualification Informatio

The tenderer shall be eligible KPWD Registered contractor

PWD Registration Certificate (Class I/II/III/IV)

Liquid assets and /or availability of credit facilities of no less than Rs.25.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Financial Status

Achieved in at least one financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.80.52 Lakhs. Financial turnover of previous years will be given a weightage of 10 percent per year to bring them to price level of FY 2026-27

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹2,020

EMD Fee Amount

₹80,600

Important Dates

Last Activity

26 May 2026

Published

26 May 2026

Bid Opening

5 Jun 2026

Download Ends

2 Jun 2026

BOQ Preview

•

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 For 3Cx300Sq.mm (300 sqmm, ESIGI wire...

•

11 kV, Jointing & Cable Termination Kit as per IS-13573 ,Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable (3*240 sqmm)

•

11 kV, Jointing & Cable Termination Kit as per IS-13573, Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable (3*240 sqmm) asper Common SR 2023-24 Vol-6 I NO 45.08 PG No 20

•

Unloading of the faulty Transformer tank with active parts and accessories at firm's work or loading of repaired Transformer tank with active parts or accessories at firm's works. asper Common SR 2023...

•

Draining out oil from the Power Transformer complete duly collecting the oil in barrels (supplied by KPTCL), shifting barrels to safe place (in the Station premises only) with proper tightness of cork...

•

Filling of oil to the main tank and OLTC tank, filtering the oil including filtering till attainment of prescribed BDV valves including labour, filtering equipment along with accessories. asper Common...

•

Crane Hire charges for loading and unloading

•

Tipper.5.5 cum Comman SR 2023-24 Volume 1 Item No 126 Page No 47A

•

Drying of Transformer at factory : Drying of active parts of transformer in Oven

•

Transformer RepairsScope: Repairs and Reconditioning of 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and...

•

Removing & refixing the pump after repairing of existing horizontal mounting/ monoblock pump with following spares, etc. including aligning of pump with reference to motor & running the pump on load. ...

•

Removing and refixing the 230/415 v 50 hz I phase/III phase suitable capacity suitable speed horizontal foot mounted screen protected drip proof continous rated monoblock/squrrel cage induction motor ...

•

Removing and cleaning the CI / DI pipes and specials including jointing materials, washing (excluding valves) etc complete. (450mm Dai pipe And Speciale) asper Common SR 2023-24 Volume 5 Item No 2.13....

•

Removing the CI/DI valves and its tail piece from the pipe line, cleaning,washing, painting and returning the same to the stores etc. for (450mm Dai pipe And Speciale) asper Common SR 2023-24 Volume 5...

•

Mobile Hydralic Crane Capacity Common SR 2023-24 Voluem 1 Item Sl No 74 Page No A45

•

Conveying of released materials to nearest stores Hire charges of tractor trolley

•

Engaging heavy mazdoor for dismantling loading and unloading

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

•

Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...

•

Providing and fixing of rubber gasket 6 mm thick with cutting of ring shaped gasket with punching holes as per flange PCD and holes for 250 mm flanged connections

•

Providing and fixing of rubber gasket 6 mm thick with cutting of ring shaped gasket with punching holes as per flange PCD and holes for 350 mm flanged connections

•

Providing and fixing of double washer nuts and bolts of 16 x 75 mm long

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room a. Engaging lectrician

•

Batching plant 50 m3 / hr rated capacity Common SR 2023-24 Volume 4 Page no 27

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room c)Gas cutting labour

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room d)Hiring of crane

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room. e)Conveying by tractor trolley

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room . f) Engaging heavy mazdoor

•

Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...

•

Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables. b...

•

Work of repairing and overhauling of upto 400 amps LT breaker bus coupler as specified below: Complete dismantling of breaker units of 400 amps, breaker of compressor room taking out the fixed and mov...

•

Work of overhauling and servicing upto 1250KW, 6.6KV, motor as specified below: a. Disconnect the HT/LT, Cable and record motor details take out the motor from bed b. Check alignment and record detail...

•

Supplying Ball bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for 100 HP

•

Supplying thrust bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for100 HP

•

Phosphorous bronze bearing bush for 100 to 150 Hp

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP STAGE BUSHES

•

Top body bush fitting

•

For Connecting bush G.M new making each 60 to 120 HP

•

Repairs to Vertical turbine pumps as per ISI specifiction with guaranteeperiod of not less than 12 months For Pumps stage body bush fitting Each ( FOR 60HP TO 120 HP)

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP IMPELLER AND NECK RING

•

For Pump body necking fitting Each for 60 HP to 120 HP

•

For Impeller breezing making

•

Pump open and fitting at workshop

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months f) For Balancing spaider rubber guide each

•

For pump gear box body radial bearing For 60HP to 120HP

•

Erection, testing, commissioning and trial running of Vertical turbine pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour...

•

Supplying fixing and wiring earthelectrode for grounding of lifts,transformers,DGsetsetc.using 40mm dia 2.9mm thick 2.5m long G Ipipe with G Ifunnel with mesh and suitable size reducer fixed on the to...

•

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. Complete including cost of materials, labour, usage charges of machinery complete as per specifications.

•

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...

•

For Transportation charges both side (WATER SUPPLY AND UGD WORKS Comman SR 2023-24, Volume-V , Page No: 164, Item no 13.74.4)

•

Supplying and fixing Moulded Case Circuit Breaker(MCCB)verth eexisting wood/panelboard using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete.Protection of Over lo...

•

Supplying SAE 10 oil etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part B , Page No: 125 sl no 11)

•

Supplying Lubricant Bearing cooling oil etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part A , Page No: 20 sl no 15 )

•

Grease GEM-RR3 etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part A , Page No: 20 sl no 12)

•

Supplying Transformer oil etc complete with all lead and lift as per the direction of engineer incharge (Comman SR 2023-24, Volume-IV Part B , Page No: 125 sl no 12)

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.100 A

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.125 A

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 3Cx185Sq.mm (185 sqmm ESTGI Wires-3.1...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in-situ vibrated M-20 (28 days cube compressive strength not less than 20 N/sq mm) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing watchmen for watch andward of lift irrigation scheme for engaging un skilled labour for day and night unskilled (Heavy work),Unskilled (Light Work),Sweeper, Billover, Blue Printer, Chief Maz...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. (Common SR Vol-4, 2023-24, P-101, 1-8.3)

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

royalty.pdf

Others - royalty • 12.37 MB

loc format.pdf

Others - LOC • 0.35 MB

11291 KW3 fin.doc

Tender Document • 1.29 MB

general specifications admin.pdf

Others - General specification • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Lift Irrigation Scheme

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

Minor Irrigation Department

Minor Irrigation Division Dharwad | Dharwad, Karnataka

Amount: ₹80.5 LCloses: 3 Jun 2026Closed

Timeline

Published26 May 2026
Closed3 Jun 2026
Bid Opening5 Jun 2026

Tender Value

₹80.5 L

EMD Value

₹80,600

Closing Date

3 Jun 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

EE Devaraj k Shigganvi

Office Number

Mobile Number

Work Description

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT11291/CALL-2

Reference Number

MI/2025-26/LI/WORK_INDENT11291/CALL-2

Tender Type

Reserved

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Dharwad

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from Civil Engineering construction Work receipts only. for last 05 years i.e from 2021-22 to 2025-26

RequiredCompany/contract Registration Certificate KPWD License

RequiredDetails of Existing commitments and on-going works and which Tenders already submitted as per section 3 of Standard bid document K/W-2

RequiredAssessed Available Tender Capacity as per K/W-2

RequiredG.S.T. Registration certificate. & latest G.S.T. Returns filed document.

RequiredLine of Credit of not less than Rs.7.40 Lakhs Bankers certificate / LOC certificate should be in prescribed format, if not, then the Bid is liable to be rejected

RequiredST caste Certificate

RequiredDomicile Resident Certificate from Past 10 Years

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-3

Conditional Tenders will not be considered

All relevant documents as per the KW-3 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified.

Name, address, and Mobile number, telex, Email and fax numbers of the contractor is to be provided

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The tenderer shall also disclose if there are any bankruptcy proceedings against him

A copy of GST registration certificate should be uploaded

The period of completion is 06 (Six months) including monsoon

If any of the dates mentioned in this tender happens to be a general holiday, the next working day holds good.

Other details can be seen in the tender documents.

Omission and Typographical errors if any will not be the ground for any claims by the Contractor.

The tenderer shall be eligible KPWD Registered contractor

Letter of Credit should be in prescribed format, if not, then the Bid is liable to be rejected

Star rates are to be adopted as per the period of completion of work.

This tender is reserved for ST

Technical Criteria

General

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Work Done Certificate

Satisfactorily completed at least 90 Percent of the Contract value in last five years that is 2021-22 to 2025-26as prime contractor at least one similar work such as Any Construction work to an extent of 25% of the cost of the work Rs.20.13 Lakhs. . Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer( if the work is done in other states)

Work Done Certificate

Others -- Past Experience

Capabilities of Vendor

Others -- Bid capacity calculation

Section 3, Qualification Information. As per K/W-3

Others -- Qualification Informatio

The tenderer shall be eligible KPWD Registered contractor

PWD Registration Certificate (Class I/II/III/IV)

Liquid assets and /or availability of credit facilities of no less than Rs.25.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Financial Status

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹2,020

EMD Fee Amount

₹80,600

Important Dates

Last Activity

26 May 2026

Published

26 May 2026

Bid Opening

5 Jun 2026

Download Ends

2 Jun 2026

BOQ Preview

•

Repair And Maintaines of Agasamatti Lift Irrigation Scheme at Haveri Taluk Haveri Dist

•

11 kV, Jointing & Cable Termination Kit as per IS-13573 ,Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable (3*240 sqmm)

•

11 kV, Jointing & Cable Termination Kit as per IS-13573, Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable (3*240 sqmm) asper Common SR 2023-24 Vol-6 I NO 45.08 PG No 20

•

Crane Hire charges for loading and unloading

•

Tipper.5.5 cum Comman SR 2023-24 Volume 1 Item No 126 Page No 47A

•

Drying of Transformer at factory : Drying of active parts of transformer in Oven

•

Mobile Hydralic Crane Capacity Common SR 2023-24 Voluem 1 Item Sl No 74 Page No A45

•

Conveying of released materials to nearest stores Hire charges of tractor trolley

•

Engaging heavy mazdoor for dismantling loading and unloading

•

Providing and fixing of rubber gasket 6 mm thick with cutting of ring shaped gasket with punching holes as per flange PCD and holes for 250 mm flanged connections

•

Providing and fixing of rubber gasket 6 mm thick with cutting of ring shaped gasket with punching holes as per flange PCD and holes for 350 mm flanged connections

•

Providing and fixing of double washer nuts and bolts of 16 x 75 mm long

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room a. Engaging lectrician

•

Batching plant 50 m3 / hr rated capacity Common SR 2023-24 Volume 4 Page no 27

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room c)Gas cutting labour

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room d)Hiring of crane

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room. e)Conveying by tractor trolley

•

Labour charges for releasing and removing old Control Panel Board and starters, from the existing location inside control room . f) Engaging heavy mazdoor

•

Supplying Ball bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for 100 HP

•

Supplying thrust bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for100 HP

•

Phosphorous bronze bearing bush for 100 to 150 Hp

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP STAGE BUSHES

•

Top body bush fitting

•

For Connecting bush G.M new making each 60 to 120 HP

•

Repairs to Vertical turbine pumps as per ISI specifiction with guaranteeperiod of not less than 12 months For Pumps stage body bush fitting Each ( FOR 60HP TO 120 HP)

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP IMPELLER AND NECK RING

•

For Pump body necking fitting Each for 60 HP to 120 HP

•

For Impeller breezing making

•

Pump open and fitting at workshop

•

Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months f) For Balancing spaider rubber guide each

•

For pump gear box body radial bearing For 60HP to 120HP

•

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. Complete including cost of materials, labour, usage charges of machinery complete as per specifications.

•

For Transportation charges both side (WATER SUPPLY AND UGD WORKS Comman SR 2023-24, Volume-V , Page No: 164, Item no 13.74.4)

•

Supplying SAE 10 oil etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part B , Page No: 125 sl no 11)

•

Supplying Lubricant Bearing cooling oil etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part A , Page No: 20 sl no 15 )

•

Grease GEM-RR3 etc., complete with all lead and lift as for the direction of Engineer incharge (Comman SR 2023-24, Volume-IV Part A , Page No: 20 sl no 12)

•

Supplying Transformer oil etc complete with all lead and lift as per the direction of engineer incharge (Comman SR 2023-24, Volume-IV Part B , Page No: 125 sl no 12)

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.100 A

•

Supply and fixing of 3 polepower contactor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.125 A

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. (Common SR Vol-4, 2023-24, P-101, 1-8.3)

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

royalty.pdf

Others - royalty • 12.37 MB

loc format.pdf

Others - LOC • 0.35 MB

11291 KW3 fin.doc

Tender Document • 1.29 MB

general specifications admin.pdf

Others - General specification • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid