8260/E8

Amount

Surface excavation n. exc 30 Cm deep and averaging 15 Cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. for laying of XLPE cables and getting out in soft / loose soil. complete all as specified and directed.

All as per Item No.1 above here in before but for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft / loose soil complete all as specified and directed.

Removing excavated material of hard/dense soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and Labour Plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and Labour Plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) for coping of pole etc including necessary form work complete all as specified and directed.

Material and Labour Hardcore of gauge n.exc 63 mm of broken bricks, deposited, spread and levelled in layers not exceeding 15 Cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix Rolled mild steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

Material and Labour Mild steel fo grade Fe 410-W (Gde-E- 250) quality-A as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pices, cleat etc complete all as specified and directed.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour Endura tiles of size 600mm x600mmx 10mm thick, suitable for external tiles, anti skid, scratch resistance and neutral to UV rays and acid and alkali reistance as in flooring laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and Labour 100 mm thick, plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregates) as sub base complete all as specified and directed.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Preparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and Fix Circular LED high bay light fittings 100 watt with tappered fin design and excellent tharmal management with IP 66 protection including necessary conncetion with all accessories including taking down old unserviceable conventional light fittings complete all as specified and as directed. Make:- Crompton cat part No. LHB11-100-CDL or Make:- Havells SAUCERGEMXPROHBP80Wled757P60DBOLTG or Make:- Bajaj cat Part No. BGHB 100W LED XE.

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 90 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection fixed with 1.5m long GI pipe 50mm bore light grade, 45°bent to shape complete after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells cat part No.ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or Make:- Crompton cat part No. LSTP-90-CDL-M Or Make:- Jaquar cat part No. LSRTO01S90XC.

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 90 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection fixed with 1.5m long GI pipe 50mm bore light grade, 45°bent to shape complete complete all as specified and as directed by the Engr-in-Charge. Make:- Havells cat part No.ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or Make:- Crompton cat part No. LSTP-90-CDL-M Or Make:- Jaquar cat part No. LSRTO01S90XC.

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 60 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection fixed with 1.5m long GI pipe 50mm bore light grade, 45°bent to shape complete all as specified and as directed by the Engr-in-Charge. Make:- Havells cat part No.DURAPEARLLNEOSL60WLED757PASYTOPC or Make:- Crompton cat part No. LSTP-60-CDL-M Or Make:- Jaquar cat part No. LSRTO01S60XC.

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 70/72 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection fixed with 1.5m long GI pipe 50mm bore light grade, 45°bent to shape complete after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells cat part No.ENDURACITYLINEMEOSL70W757PASYBOTF or Make:- Crompton cat part No. LSTP-72-CDL-M Or Make:- Jaquar cat part No. LSRTO01S720XC.

Supply and fix LED decorative post top lantern, 35/40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- Havells cat part No. CORALPT35WLED830PSYMTOPC or CROMPTON Cat part No. LPTO-40-CDL-M

Supply and fix LED decorative post top lantern, 35/40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection complete all as specified and as directed. Make:- Havells cat part No. CORALPT35WLED830PSYMTOPC or CROMPTON Cat part No. LPTO-40-CDL-M

Supply and fix PVC cable terminal boxes, outdoor type of size 170mm x170mm x105mm with MCB SP 6 to 32 Amps including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- Syntex Model No. GSJB 1414 or equivalent model from Make:- Hansel / Universal.

Supply and fix PVC cable terminal boxes, outdoor type of size 170mm x170mm x105mm with MCB SP 6 to 32 Amps including all necessary fittings and connection complete all as directed by Enginner-in-Charge. Make:- Syntex Model No. GSJB 1414 or equivalent model from Make:- Hansel / Universal.

Supply and Fix MCCB , 3 pole 415 V, 25-100 amps with breaking capacity 16 kA complete all as specified and as directed. Make:- Havells Cat part no.IHLGNT0025 toIHLGNT0100 # or equiavalent model from make:- Schneider/ ABB.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 25X4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 32X6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

Supply and Fix 2.5 Sqmm PVC insulated, multi stranded, twin core copper conductor cable from junction box to street light fittings complete all as specified and as directed including taking out old unserviceable copper conductor.

Supply and Fix 2.5 Sqmm PVC insulated, multi stranded, twin core copper conductor cable from junction box to street light fittings complete all as specified and as directed.

Taking out unserviceable UG cables of any type and any sizes from trenches etc and removing from the site of work complete all as specified and directed. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately under relevant item of these schedule.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 35 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 6 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer including 200mm thick PCC type D2 ( 1:4:8, using 40mm graded crushed stone aggregates) for pole foundation bed with dismantling of old unserviceable pole and PCC complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 cm height including numbering of pole all as directed by EIC. (c) Cost of earthwork shall deemed to be included in the unit rate quoted by the tenderer against these item.

Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer including 200mm thick PCC type D2 ( 1:4:8, using 40mm graded crushed stone aggregates) for pole foundation bed complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 cm height including numbering of pole all as directed by EIC. (c) Cost of earthwork shall deemed to be included in the unit rate quoted by the tenderer against these item.

Supply, install LT Bus bar junction box 200 amps rated of size 0.25m x0.25m x0.20m outdoor canopy type, CPRI approved manufacturer, factory made, floor mounted, dust and vermin proof, front and rear operated door, with necessary locking arrangement made out of 50mmx 6mm mild steel angle iron frame work and CRCA sheet of 3.15mm duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 Hz, 1 phase 2 wire system and shall be complete with suitable capacity screwed Aluminium bus bar 200 amps rating with suitable size nuts and bolts, thimbles glands including taking down old unserviceable junction box complete all as specified and as directed.

Supply, install LT Bus bar junction box 200 amps rated of size 0.25m x0.25m x0.20m outdoor canopy type, CPRI approved manufacturer, factory made, floor mounted, dust and vermin proof, front and rear operated door, with necessary locking arrangement made out of 50mmx 6mm mild steel angle iron frame work and CRCA sheet of 3.15mm duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 Hz, 1 phase 2 wire system and shall be complete with suitable capacity screwed Aluminium bus bar 200 amps rating with suitable size nuts and bolts, thimbles glands complete all as specified and as directed.

Supply, install LT Bus bar junction box 200 amps rated of size 0.50m x0.50m x0.60m outdoor canopy type, CPRI approved manufacturer, factory made, floor mounted, dust and vermin proof, front and rear operated door, with necessary locking arrangement made out of 50mmx 6mm mild steel angle iron frame work and CRCA sheet of 3.15mm duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 Hz, 3 phase 4 wire system and shall be complete with suitable capacity screwed Aluminium bus bar 200 amps rating with suitable size nuts and bolts, thimbles glands including taking down old unserviceable junction box complete all as specified and as directed.

Supply and fix GI pipe, 40mm bore, light grade for protection & passing of LT cable fixed to pole/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified & directed including taking out old unserviveable proction pipe.

Supply and fix GI pipe, 32mm bore, light grade for protection & passing of LT cable fixed to pole/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified & directed.

Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge.

K.P Construction Co

ACESOLARR RENEWABLE ENERGY LLP

PINKY CO

INDIA ELECTRICAL EQUIPMENTS

NIRMAL SALES CORPORATION

SUDHA ENTERPRISES

M/s Santosh Industrial Corporation