Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹47.8 L+₹2.3 L (5.03%)Rejected-Finance | L2 | Rejected-Finance Higher bid | |
| 3 | L3₹48.3 L+₹2.9 L (6.33%)Rejected-Finance | L3 | Rejected-Finance Higher bid | |
| 4 | L4₹49.1 L+₹3.6 L (7.88%)Rejected-Finance | L4 | Rejected-Finance Higher bid | |
| 5 | L5₹50.0 L+₹4.5 L (9.95%)Rejected-Finance | L5 | Rejected-Finance Higher bid |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
21 Mar 2020, 6:00 pmClosed
GE WEST FEROZEPUR CANTT
GE WEST FEROZEPUR CANTT
PROVN OF WAITING SHED FOR RECTS OF ARM RECRUTMENT OFFICE AND SANCTIONED WORK OF AGE BR 1 UNDER GE WEST FEROZEPUR CANTT
2020_MES_316190_1
802019/GE-71/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST FEROZEPUR CANTT
As per tender
7 documents required · 7 mandatory
₹500
Yes
GE WEST FEROZEPUR CANTT
₹50,000
Yes
GE WEST FEROZEPUR CANTT
19 Aug 2020
2 Mar 2020
23 Mar 2020
3 Mar 2020
21 Mar 2020
16 Mar 2020
14 Mar 2020
Amount
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr depth for cesspits, manholes etc. and getting out soft/loose soil even in foul position complete aii as specified and as direcetd.
Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed.
Excavation in post holes (or similar holes) each n exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth arouond in layers n.exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface in hard/dense soil.
M & L sand filling under floors are in foundations including watering and consolidation complete all as specified and directed.
Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.
M&L for PCC (1:3:6), type C2 (40 mm graded aggregate ) in foundation filling and mass concrete for bottom of manhole complete all as specified and directed.
M&L for PCC (1:4:8), type C2 (40 mm graded aggregate ) in foundation filling and mass concrete all as specified and directed.
M&L for PCC1:3:6 type C-2(40mm graded aggregate)as in posts etc all as specified.
Providing cement concrete type B1 1:2:4 (20 mm graded aggregate) as in copings to brick wall, kneelers,bedplates and all other similar works including necessary form work complete all as specified and directed.
M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Supply only integral water proofing compound complete all as directed.
Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 for cracked wall of manholes,septic tank, soak pits etc ad all other similar works complete all as specified and directed.
All as per item No 14 here-in -above but except bricks complete all as specified and directed. Note :- Old serivceable bricks obtained from Srl No shall be reused after proper cleaning.
M &L continuous brick edging with width equal to width of the brick laid on end vertically with burnt clay bricks of sub class 'B'.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening.
Mild steel Screw bolts (machine made) with hexagonal or square heads at one end screwed the other or screwed both ends, each screwed end to be fitted with washers and one hxagonal or square nut not exceeding 5cm long but not exceeding 10cm long diameter of neck in 11 to 15mm dia complete all as specified and as directed.
S&F deformed or twisted TMT bars 8 mm dia cut to length bent to shape required including cranking binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S&F rolled mild steel section of grade FE-410W (Gde E 250 quality A ) as in steel post/pillars of any shape (rectangular /circular/ square where connected to roof/ truss etc fixed with angle cleat, base plate etc
S&F rolled mild steel plates ( plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment of Gde Fe-410-S.
S&F of rolled mild steel as staging for water tanks, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. conforming to Fe-410-W (Gde E-250) quality B.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and also applying two coats of synthetic enamel paint over a coat of red oxide primer
S&F in repair PVC connection 15mm size PTMT nuts of length 450 mm.
100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.
75mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.
M&L in repair 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.
M&L in repair for PVC (SWR) multi floor trap in repair with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed.
M&L in repair for PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as directed.
M & L for PCC 1:3:6 type C2, (using 40 mm graded aggragate) as in concrete bed to 200 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as directed.
M & L for PCC 1:3:6 type C2, (using 40 mm graded aggragate) as in concrete bed to 150 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as directed.
M & L for 200 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.
M & L for 150 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.
Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 200 mm complete all as directed.
Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 150 mm complete all as directed.
M&L for 200 mm thick soling (or sub base) with broken boulders or quarried stone, interstices filled , surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.
M&L for 100 mm consolidated thick moorum/red bajri spread rolled and consolidated to gradient and camber required as in road earthen shoulders/ granular sub base below soling layer complete all as specified and directed.
Material and labour for 150 mm thick (Compacted thickness laid in two layers of 75 mm each) WBM, with coarse aggregates granite,trap or Basalt of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mmsize) , spread, rolled and consolidated to gradient and camber using required complete all as specified and directed.
M&L for bituminous premix semi-dense asphaltic concrete 40 mm (average) consolidated thickness with 5.5% binder content (Paving bitumen any penetration) by weight of total mix (Design mix), rolled and compacted to required camber and gradient complete all as specified and directed.
Dismantling brickwork of stone/boulder masonry, build incement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.
Dismantling structural steel work framed truss etc.
Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 200 mm complete all as directed.
Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 150 mm complete all as directed.
Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.
S & F in repair Sluice Valve class PN 1.6, 80 mm dia complete all as specified and as directed by Engr-in-Charge
M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M&L 100 mm Cement concrete (1:2:4) type B-1 using 40mm graded stone aggregate as in floor topping, surfaces finished even and smooth without using extra cement complete all as specified
M&L for Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 300X200 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing in cement mortar (1:4) complete all as specified.
S/F of Glazed coloured and cereamic tiles in vertical surfaces 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed
M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
S & F machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over complete all as specified and directed.
M and L for 15 mm thick rendering in cement mortar 1:4 inside and outside wall of manhole of brick work/ concrete surface and finishing even and smooth without using extra cement mortar as per manufactures instructions complete all as specified & as direcetd. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.
Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces compound finished even and smooth (without using extra cement ) all as as specified.
Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 80 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.
All as per item No 64 here in before but 20mm dia.
M&L for prepration unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at 10 kg per 10 sqm complete all as specified and as directed.
Demoletion of reinforced cement concrete (reinforcement cut as required to facilitate demoletionof any description and in any position not otherwise specifically provided for complete all as specified and directed.
Excavation in trenches not exc. 1.5 mtr wide and exc. 1.5 mtr but n.exc. 3.00 mtr depth for cesspits, manholes etc. and getting out soft/loose soil even in foul position complete aii as specified and as direcetd.
S&F Table top Vitreous china Wash hand basin (Jaquar Model NO:CNSWHT:705) white concealed /under counter basin type fit under granite platform size 420X590X195mm in cluding CP bottle trap all other fixing arrangements all as specified and directed
M&F Corner glass shelves with CP rail 225mm radious,6mm thick as per sample radious for bath room, fixed on suitable support all as specified and directed
S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type640X360X690 (monolithic flush cistern type)Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed.
S&F CP single Towel Rod 600mm long r (Jaquar model NO:AHS-1507)including with all fixing arrangemetns as fixed in repairs and all as specified and directed
S&F brass CP Angle /Stop cock (Jaquar model No: LYR-CHR-38053)with long shank and cup (concealed type) with wall flange 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs
S&F CP Toilet paper holder with flap cover (Jaquar model No:AKP-CHR-3573P/ AQN-7753) fixing with all necessary arrangementsscres etc.., all as specified and as directed
S&F CP double coat hook (Jaquar model NO:AQN7761)including with all fixing arrangemetns and all as specified and directed
S&f Soap dispenser push button model (Jaquar Model NO:SDR-WHT-DJ0010F)capacity 0.8 ltr of ABS body fixed all as per manufacturing instructions and all as specified and directed.
S&F CP Towel Rack 600mm long with out hangersand with lower hanger (Jaquar model NO:AHS-1581)including with all fixing arrangemetns and all as specified and directed
S&F 600mm long glass shelf with ss railing (Jaquar Model NO:AKP-CHR-35771P)including with all fixing arrangemetns and all as specified and directed
S&F looking mirror(900x600x6 mm) with frame and all as specified and directed Make :- Prayag (Model No : BLM-03F)
S&F as in repair CP grating round 125 mm complete all as specified. Make:- Prayag Cat No BA-40 or Equivalent
S&F Two Way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) (Make:Jaquar) CQTNO;23041/FLR 8041N) and Make: CERA catNo:F3002161 /F2002161 15 mm dia bore type with handle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs
S&F 15mm dia Wash Hand Basin mixer(hot and Cold)(Table mounted Model) with extended spot type with 450mm braided connection pipe (Without POP UP) Make: CERA Cat No:F 3002581/Jaquar Cat NO:CQT-233321B
S&F in repairs Health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge. Make:Jaquar cat No: ALD-CHR-585; Cera Cat NO:F8030103,Prayag No:1871
M&L for 20 users capacity conventional on site LLDPE septic tank designed to carry sewage and sullage water ncluding excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection and all other arrangments complete all as specified and directed.
M&L for soakage wells of size 1.2 M dia X 3 M effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed.
S&F in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.
Cleaning and removal of foreign material from inside the Gully trap including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete all as specified and directed.
Cleaning of existing manhole of any size including removing & re-covering of RCC/CI cover of depth not exc 1.5 mtr by bailing out water/sewage by mechanical pump or manually including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground complete including cleaning sewage line by rodding manhole to manhole complete all as diercted.
Cleaning of existing manhole of any size including removing & re-covering of RCC/CI cover of depth exc 1.5 but n. exc 3.00 mtr by bailing out water/sewage by mechanical pump or manually including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground complete including cleaning sewage line by rodding manhole to manhole complete all as diercted.
Cleaning of sewage pipe lines of dia exc 100mm and not exc. 250mm systematically by passing/rodding ropes,knots,bamboo/wire/kandi, rotary cleaning rods complete all as specified and directed.
M&L 18-20mm thick granite (Of any type ) work (table rubbed and polished ) in steps,jambs pillars window -cills cooking platforms and like in cement mortar (1:4) incuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 10mm thick screed/backing coat and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing,polishing complete all as specified and directed. Note:- Rate quoted by the contractor deemed to inclusive of the following:-.(i) Exposed edges to be rounded
M/s Manoj Construction Co.
KAILASH CONSTRUCTION COMPANY
Brar Enterprises
JAWAHAR CONSTRUCTION COMPANY
HAPPY ELECTRICALS
AKASH ELECTRICALS
CHETAK CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .