Special repair of Canteen, V.C. Room, OPD Room and Kitchen in Distt. Jail Palwal in Palwal Distt. Based on New HSR 2021 Re-Tender

Amount

Civil Works

Providing & Fixing false ceiling without grooves with 12mm to 15mm thick, 600 x 600mm best quality mineral fibre tiles of approved make fixed on M.S. steel runners frame i/c cost of screws angles, cleats, rawel plugs with taping and painting etc. complete in all respect as per approval of the Engineer-in-Charge of the work. (HSR 13.92)

11.43cm thick brick wall laid in cement sand mortar 1:4 in superstructure. (HSR 11.48 a)

Providing & fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92) Note: - The agency to whom the work is allotted will have to produce original bill/ voucher for all quantity in token of proof of purchase of material.(a) Size of ceramic Glazed Tiles 200 x 300mm of reputed manufacturer like: - RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge.

Removing doors and windows (wooden and steel) together with the dismantling of walls:- (HSR 8.17) (a) Doors

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS; 733 and IS; 1285fixed with rawplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and (HSR 17.95 + Note II)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom, and sides with required neoprene felt etc. aluminium sections shall . (HSR 17.96) Note (i) Add Rs. 15/- Per Kg. if powder coating of 50micron is done instead of anodizing in above item no. 9 & 10. (HSR 17.96 + Note

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS; 12823 grade 1 type II in panelling fixed in aluminium doors. Windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. (HSR 17.97)(b) Pre-laminated particle board with decorative lamination on both sides.

Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30)(b) Glass panes 4mm thick, exceeding 40sq dm areas.

Providing and fixing hard drawn steel wire fabric 75mm x 25mm rectangular mesh with 3.25mm dia wire fixed on steel windows of standard rolled sections with 3mm thick flat iron cover moulding of 12.50mm width fixed with machine screws welded complete in all respect. (HSR 18.33)

12mm thick cement plaster 1:6. (HSR 15.7)

Providing & fixing Ceramic Tiles/ anti skid tiles of size 400 x 400mm or abovee size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: - Tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA & RAK. (HSR 14.91) Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Cost of aluminium fitting complte for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt). (HSR 17.72)(a) for single leaf shutter.

Providing and fixing in position Indian make (Ordinary) Lavatory Suites Consisting of Lavatory in Vitreous China Ware size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I Brackets for building into wall including Painting; 32mm C.P Brass Waster with C.P brass chain and rubber plug; 15mm C.P Brass Screw down pillar tap with Jamnuts or couplings best design (as approved by the Engineer- In-charge). All fittings best Indian make and to the approval of the Engineer-in-charge. ALL brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fittings etc. (HSR 30.41) (a) White (v) Size 560 mm x 450 mm with one no. Tap.

Chowkats of commercial hard wood such as hollock, champ, chikrassy, and chaplash, etc., (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned), of doors and windows including iron hold fasts, corner straps, screws, bolts for hold fasts, etc., complete fixed in positon. (HSR 17.12)

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/ cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (HSR 17.93) (a) commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:-(iii) 35 mm thick

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- (HSR 18.34) (c) door and window frame size 127mm x 50mm with 40mm wide double rebate.

Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide locak rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) as per (HSR 17.92) 35 mm thick

Yunish Khan Contractor