Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹20.2 L+₹81,499.50 (4.22%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹20.7 L+₹1.4 L (7.02%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹20.8 L+₹1.4 L (7.49%)Rejected-Finance | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹20.9 L+₹1.5 L (7.84%)Rejected-Finance | L5 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹37,800
Closing Date
16 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER JORHAT, MES, JORHAT-785005
CERTAIN REVENUE WORK AND MINOR WORKS AT P-197 , P-246 N P-74AT LICHUBARI UNDER GE JORHAT.
2023_MES_582638_1
8120/E8
Open Tender
Civil Works
Item Rate
120 days
Jorha-05
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER JORHAT
₹37,800
Yes
30 Mar 2023
23 Feb 2023
17 Mar 2023
23 Feb 2023
16 Mar 2023
10 Mar 2023
23 Feb 2023 - 28 Feb 2023
Amount
NOTES :The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level)
Material and labour for Reinforced Cement Concrete M-20 (Nominal mix) using 20 mm graded stone aggregate as in slab complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landings not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete.
Material and labour for TMT Bars Fe 500D of 10mm dia & over cut to length bent to shape required inculding cranking bending spirally hooping for columns etc and binding with MS wire ennealed less than 0.9mm dia or securing with clip complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Material and labour for Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal outside of MOD land complete all as specified and as directed.
Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.
Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, with water proofing treatment. Note:- Water proofing compound shall be measure and paid separately
Rendering 5 mm in Cement Mortar 1:3 on fair faces of brick work or concrete ceiling surfaces finished fair
Supply only integral liquid water proofing compound complete all as specified and directed.
Material and labour for complete removal of existing treatment of internall wall surface of building/structure by mechanical appliance and preparation of and applying two coats plastic emulsion paint over a coat of primer ver a coat of 1.5 mm thick cement base wall putty on ceiling surfaces of any description over 10 cm girth or width complete all as specified and directed.
Material and labour for complete removal of existing treatment of internal surface of building/structure by mechanical appliance and preparation of applying two coats plastic emulsion paint over a coat of primer ver a coat of 1.5 mm thick cement base wall putty on ceiling surfaces of any description over 10 cm girth or width complete all as specified and directed.
Material and labour for preparation of new surfaces and and applying 2 coats of cement based paint over a coat of alkali based primer complete all as specified and directed.
Material and labour for complete removal of existing treatment of external wall surface of building/structure by mechanical appliance and preparation of old surfaces applying two coats of acrylic exterior weather resistant paint(weather proof paint @ 1.67 ltr/10 sqm per two coats ) of required colour shade and as per manufacturer’s specification over a coat of acrylic exterior primer((@ 2.20 kg/10 sqm) over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and applying two coats of 1st quality textured paint of required colour shade and as per manufacturer's specification over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors, sunken floor and paving complete all as specified
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed.
Material and labour for75 mm thick plain cement concrete 7.5 (Nominal Mix) using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed.
Material & Labour of vitrified ceramic tiles,double charged dark coloured shade, 10 mm thick of square/rectangular area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete all as specified and as directed.
Material & Labour of vitrified ceramic tiles,double charged dark coloured shade, 10 mm thick of square/rectangular area of each tile not exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete all as specified and as directed.
Material & Labour Glazed ceramic tiles 1200x600 x 10 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.
Material & Labour of 18mm thick granite ( of any type) work ( table rubbed and polished in pillars and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite over 15mm thick screed bed layer in CM (1:4) including taking down existing one complete all as specified and as directed.
Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. not exceeding 1.50 Sqm each complete all as specified and as directed.
Supply and fixing of anodised powder coated aluminium sections of various sizes as in frame and shutters of doors, windows, ventilators with one or more rebates including joining cleats, handles, glazing clips, packing, anodized aluminium snap beading screws etc complete all as specified and directed by Engr-in-Charge.
Material and labour for power coated anodised aluminium door shutters made of aluminium section as per TD drawing including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, floor hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
Material and labour for 1.2 mm thick polyvinyl profile colour wall panelling system with ‘J’ profile for inside corner, ‘T’ profiler for outside corner, anti- anti-bacterial, fire retardant, waterproof resistant , impacts resistance not less than 50 LBS , tensile strength >37.00 MPa, tensile modulus >2000MPa, surface distortion above 120o F confirming to ASTM D-4477 including GI grid frame work GI section of 80mmx 26mm x 53mm &GI perimeter channel section 20mmx 28mm x 30mm & 2, brass screw completed as per manufactures instructions etc. all as specified and directed.
Supply and fixing of sheet glass 5.5 mm thick ordinary quality fixed to aluminum door in squares in each pane of required size complete all as specified and as directed.
Supply and fixing of Glazing with sheet glass (frosted on one side) 4 mm thick ordinary quality with oil putty in square not exceeding 0.5 Sqm in each pane.
Supply and fixing of Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
Material and labour for Mortice lock brass vertical type 4 levers and size of 100mm. complete all as specified and directed.
Supply and fixing in repairs Stainless Steel drapery rod (1 mm thick stainless steel section outer dia 25 mm with bracket, ring & fancy side holders complete all as directed by Engr-in-Charge
Material and labour for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing on vertical PVC fillet frame all as per specified on page no 162 of SSR Part-II complete all as specified and directed.
Material and labour for 18 mm thick wood grain printed colour PVC prelaminated board for cupboard shutter complete all as specified and as directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
Supply and fixing of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors including taking dwon old one complete all as specified and as directed.
Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors including taking dwon old one complete all as specified and as directed.
Supply and fixing in repairs angle valves fancy type, chromium plated with long shank and cap (concealed type), cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and of size 15 mm bore complete all as specified and directed. Make :- Cat no ARI 39053 of Jaquar or equivalent model of make list as given in PS as approved by GE.
Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia of outlet complete all as specified and directed.
Supply and fixing of 8 mm thick frameless toughen glass wall to wall shower enclosure of size 2000x 2000 mm(max) with two fixed and one open able door fixed on side panel including stainless steel panel hardware complete all as specified and as directed. Make:JSE-CHR-3POPTSDL1520 of JAQUAR or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of 8 mm thick frameless toughen glass wall to wall shower enclosure of size 2000x 2400 mm (max) with two fixed and one open able door fixed on side panel including stainless steel panel hardware complete all as specified and as directed. Make:JSE-CHR-3POPTSDL15202024 of JAQUAR or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of shower panel made of anti-finger print stainless steel body of size of 1600 mm x 200 mm with and including 2 Moveable ABS body massage jets , one no Head Shower, one no Hand shower with with flexible hose, one no cascade shower, Thermostatic mixer with diverter and all necessary fitting and fixtures required as per manufactures instruction complete all as specified and as directed. Make: JPL-SSF-ST88158B of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of in repair 15mm bore, chromium plated two way bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed. Make Cat no ARI 39041 of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of Vitreous china down water closet , single piece - with PP soft close seat cover, hinges, floor mounted water saving dual flushing EWC and white colour with concealed S-trap or P-Trap, white, 690 x 370x 710 mm, including connection to drain (or outgoing pipe) etc all as specified and as directed. Make Cat no LYS-WHT-38851S300UFSMN of Jaquar equivalent model of Kohler/Grohe/ROCA
Supply and fixing of table top basin vitreous china wash basin white flat back, size 700x435x135 mm including CP waste coupling, bottle trap,with GI pipe brackets & , rag bolt in cement concrete/brick wall and making good wall surface complete all as specified and as directed. Make:- ARS-WHT-39903 of Jaquar or equivalent model of make list as given in PS as approved.
Supply and fixing of brass chromium plated single lever basin mixer wall mounted exposed part kit type of consisting of brass concealed body with operating lever, cartridge sleeve, wall flange, nipple & spout and all necessary fitting and fixtures required as per manufactures instruction complete all as specified and as directed. Make: ARI-39233NK & ALD 233N of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of Toilet paper holder chrome plated complete all as specified and directed. Make Cat no AKP 35753PS of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of Soap Dispenser with Glass Bottlecomplete all as specified and directed. Make Cat no CAN-1135N of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of double arm wall mounted reversible plain / magnifying (X3) pivotal mirror complete all as specified and directed. Make Cat no ACN-1193N of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of Towel shelf/rack chrome plated 24’’ long complete all as specified and directed. Make Cat no CAN-1581H of Jaquar equivalent model of make list as given in PS
Supply and fixing in repairof Towel Rail 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make :- Cat no ACN-1111SM of Jaquar or equivalent model of make list as given in PS as approved by GE.
Supply and fixing in repairof Towel ring of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make :- Cat no ACN-1121N of Jaquar or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of Glass shelf chrome plated 22" long complete all as specified and directed. Make Cat no AKP-35731P of Jaquar equivalent model of make list as given in PS
Supply and fixing of corner glass shelf chrome plated complete all as specified and directed. Make Cat no ACN-1173 of Jaquar or equivalent model of Kohler/Grohe/ROCA
Material and labour for GI Frame work for seamless ceiling comprising of GI perimeter channel 0.55mmm thick with two unequal flanges of 20 and 30mm and web of 7 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended form soffit at approx 900mm centre to entre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.
Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)
Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)
Subtotal of Sch A part-I
SCHEDULE 'A' PART - II FOR E/M PORTION (Sl No __ to ____)
Material and labour for point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for one light/fan point controlled by one switch complete all as specified and as directed.
Supply and fixing of Metal flush modular box for 2 module complete all as specified and as directed.
Supply and fixing of Metal flush modular box for 8 module complete all as specified and as directed.
Supply and fixing of White cover plate with frame (both ineer plate & outer plate cover) , 2 module complete all as specified and as directed.
Supply and fixing of White cover plate with frame (both ineer plate & outer plate cover) , 8 module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 2 module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 3module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 4module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 6module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 8module complete all as specified and as directed.
Supply and fixing in repaire of White cover plate with frame (both ineer plate & outer plate cover) , 12 module complete all as specified and as directed.
Supply and fixing of Modular switch 6 Amp single pole one way complete all as specified and as directed.
Supply and fixing in repaire of Modular switch 6 Amp single pole one way complete all as specified and as directed.
Supply and fixing in repaire of Modular switch 16 Amp single pole one way complete all as specified and as directed.
Supply and fixing in repaire of Modular socket 16/6 Amp 3 pin combined shattered complete all as specified and as directed.
Supply and fixing ceiling rose surface bakelite 65x50mm three terminals complete all as specified and as directed.
Supply and fixing LED light fitting Spot type with high out put diffuser 10 w 220 V AC decorative type with driver holder and LED lampincluding connecting up three core1.00sq. Mm copper conductor flexible wire/cable complete all as specified.
Supply and fixing in repairs of LED light fitting square type high out put diffuser 18 W 220 V AC decorative type with driver holder and LED lamp including ,internally pre-wired including connecting up three core1.00sq. Mm copper conductor flexible wire/cable complete all as specified.
Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp & high power LED’s as light source with 110 Lumen per watt (Minimum) and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No LDL-10-CDL of Crompton/ BCLSB 10NW of Bajaj or equivalent model of make list as given in PS as approved by GE.
Supply and fixing wall mounted fan, 400 mm sweep, 240 volts grade,1350 RPM, including connecting with ceiling rose complete all as specified and as directed. Make: Model: Platina Remote white Wall Fan of make- Havells or equivalent model in CGL/Bajaj
Supply & Fixing exhaust fan 250mm sweep PVC body with louvers symphony type, AC single phase,including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed.
Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 8Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length complete all as specified and as directed.
Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed.
Supply and fixing MCB DP 40 to 63 amps 415 volts 10KA breaking capacity.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
M/S Deep Construction
M/S BARUAH ELECTRICALS
M/S RK SAHA AND CO
M/S BARUA REFRIGERATION WORKS
A K DUTTA CHOWDHURY AND CO
M/S DHAR AND DHAR
M/S DILIP GOSWAMI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .