REPAIRS/REPLACEMENT OF OLD BATTERY BANK , LT PANEL, AMMETER ,VOLTMETER, APFC PANEL AND CONNECTED ITEMS OF ELECTRIC INSTALLATION OF RA AND DA UNDER GE PULGAON

Amount

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in any kind of soil for laying / taking down of cables, getting out and levelling of bottom suface to required level all as specified and directed by EIC.

M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil. complete all as specified and directed by EIC.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed by EIC.

Supply and fixing Double wall Corrugated High Density Polymer Ethylene (HDPE) pipe of SIZE 50 mm diameter as per IS 14930 (Part-2):2001, Laid in trenches/floors and fixed on walls/poles, with and including neccessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed. by EIC

All as per item No 4 above….. But for HDPE pipe size 90 mm diameter

Taking out LT XLPE/PVC insulated armoured cable alongwith all joints of any size from trenches wall/roof/Pole complete all as directed by EIC.

Supply, laying and testing 10 Sq mm 4 core LT XLPE insuated PVC bedded galvanised steel strip or wire armoured earthed electric power cable with aluminium conductor 1100 volts grade, heavy duty in trenches/along pole or wall complete all as specified and directed by Engineer-in-Charges. Note:- 1. Excavation and earth work, DWC pipe, clamps, and cable joint shall be measured and paid separetely under respective items :-

All as per item No 7 above….. But of size 16 Sq mm 4 core

All as per item No 7 above….. But of 25 Sq mm 4 core

All as per item No 7 above….. But of 35 Sq mm 3.5 core

All as per item No 7 above….. But of 50 Sq mm 3.5 core

All as per item No 7 above….. But of 70 Sq mm 3.5 core

Supply & laying in repair 40mm bore galvanized steel tubing "light grade" with all fittings in trenches/ under roads/ along pole/ wall for cable protection all as specified & directed by Engr-in-Chrage. .

All as per item No 13 above….. But of size50 mm bore

Road cutting for UG cable under road/railway crossing, pavement, hardstanding by mannually means, protection GI pipe for cable of required dai and making it good to match with the adjoining surface/structure for after cable passing complete all as specified and directed. by EIC Note : GI pipe and PCC will be measured and paid against respective items.

Material and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation of pole upto ground level complete all as directed .

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/plinth block / road trench filling including necessary form work all as directed by Engr-in-Chrage.

S&F for Indicator lamp neon/LED type (set of three ) complete all as specified ad directed. by Engr-in-Chrage

S& F for Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade FRLSH type with copper conductor multistranded cable not less than 1.5 sqmm with lugs on both ends of cable. complete all as specified ad directed. by Engr-in-Chrage

M& L for taking out LT feeder panel front and back type opening replace old clamps and fix new hinges by drilling or belding as per condition , replaced burnt out lugs and insulation , proper, insulation taping to XLPE cable and painting inner and outer side , top and bottam, including cleaning of grass around, from the panel till 2mtr and from road to panel for easy operation complete all as specified and drirected by Engr-In-Charge

M& L for taking out LT feeder panel all cables from loops, for fixing GI Pipe for cable protection and making new foundation in place of broken foundation with PCC 1:4:8 in 40 mm graded stone aggregate and re-fixing all cables with proper lugs after inserting through GI pipe complete. Note :; PCC shall be measured and paid in the respective items.

M&L for Preparation of old painted surfaces of steel tubular poles 9/11 Mtr long including cross arms protection pipe and painting one coat of aluminium paint from ground level to top of pole and cross arms and protection pipe and painting including writing poles numbers in white letter on black background complete all as specified and directed by Engr-in-Charge.

S and F in repair loop in / loop out box of internal size 250 x 210 x 115mm made out of FRP (Hot moulded type) with weather proof canopy and locking screws alongwith 5/6 Amps MCB-01 No, 16 Amps rated 2 pole connector - 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector complete in the box, duly fixed to steel tubular pole using 25 x 3mm FI clamp with suitable gland and lugs for connecting cable including taking down old one complete all as specified and as directed.

Material and labour in replacement/repair for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (2009) connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt alround earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 50mm thick cover reinforced with 8mm dia TMT bars @ 100mm c/c both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm bore GI medium grade earth lead protection pipe, complete all as specified and directed. Note :- Earth strip 32x6 mm and protection pipe 40 mm dia up to 7.5 mtr shall be included in quoted rate.

Supply and fixing in replacement of SCR controlled cum boost single phase 30 volt 40 Amp Battery charger of make APEX and DC distribution board in commoncubical. The charger is suitable for 230 Volt +/- 10% single phase AC input and DC output for 24 volt -100 AH Battery Bank and supply load. DC Distribution Board : Incomer : 63 Amp MCB DP-01 No Outgoing : 16/20 Amp MCB DP-01 No supply of lead Acid SMF VRLA Battery Bjank of 30 Volt 100 AH consisting of 15 Nos cells of 02 Volts 100 AH capacity each complete with inter cell connector SS Nut, Bolts and washers MS powder coated stand in factory charged condition complete all as specified ad directed. by Engr-in-Chrage

Supply and fixing Microprocessor-based Demand Controller with programmable demand limits (CLOUD BASED DEMAND CONTROLLER WITH MULTIFUNCTIONAL METER) for 700 KVA, adjustable time intervals (15/30 mins), and built-in display for real-time . Monitoring including HT CT 100/A ratio, 11 KV CL-0.5 15 VA and Siren. (i) Controller with automatic control over non-essential loads (load shedding feature) based on demand threshold (ii) Demand forecasting alarm/Siren system for upcoming threshold breach (with visual and audible alarms) (iii) Microprocessor-based controller with configurable demand limits and logging capabilities. (iv) Demand intervals: Configurable for 15-minute or 30-minute intervals. (v) Load shedding capability based on demand threshold with automatic restoration. (vi)Communication: RS-485, Modbus, Ethernet, optional GSM module. (vii)Display: LCD/LED for real-time demand monitoring. Notes: (a) All equipment and installation must conform to the latest IS/IEC standards. (b) Any civil works (e.g., mounting structures, trenches for cables) are to be included in quoted rate. (c) Warranty: Minimum of 2 years on all equipment and workmanship. complete all as specified ad directed. by Engr-in-Chrage

Supply and fixing Microprocessor-based Demand Controller with programmable demand limits (CLOUD BASED DEMAND CONTROLLER WITH MULTIFUNCTIONAL METER) for 250 KVA, adjustable time intervals (15/30 mins), and built-in display for real-time . Monitoring including Split core CT 400/5A ratio CL-0.5 5 VA tapewound and Siren. (i) Controller with automatic control over non-essential loads (load shedding feature) based on demand threshold (ii) Demand forecasting alarm/Siren system for upcoming threshold breach (with visual and audible alarms) (iii) Microprocessor-based controller with configurable demand limits and logging capabilities. (iv) Demand intervals: Configurable for 15-minute or 30-minute intervals. (v) Load shedding capability based on demand threshold with automatic restoration. (vi)Communication: RS-485, Modbus, Ethernet, optional GSM module. (vii)Display: LCD/LED for real-time demand monitoring. Notes: (a) All equipment and installation must conform to the latest IS/IEC standards. (b) Any civil works (e.g., mounting structures, trenches for cables) are to be included in quoted rate. (c) Warranty: Minimum of 2 years on all equipment and workmanship. complete all as specified ad directed. by Engr-in-Chrage

Supply and fixing Microprocessor-based Demand Controller with programmable demand limits (CLOUD BASED DEMAND CONTROLLER WITH MULTIFUNCTIONAL METER) for 120 KVA, adjustable time intervals (15/30 mins), and built-in display for real-time . Monitoring including Split core CT 200/5A ratio CL-0.5 5 VA tapewound and Siren. (i) Controller with automatic control over non-essential loads (load shedding feature) based on demand threshold (ii) Demand forecasting alarm/Siren system for upcoming threshold breach (with visual and audible alarms) (iii) Microprocessor-based controller with configurable demand limits and logging capabilities. (iv) Demand intervals: Configurable for 15-minute or 30-minute intervals. (v) Load shedding capability based on demand threshold with automatic restoration. (vi)Communication: RS-485, Modbus, Ethernet, optional GSM module. (vii)Display: LCD/LED for real-time demand monitoring. Notes: (a) All equipment and installation must conform to the latest IS/IEC standards. (b) Any civil works (e.g., mounting structures, trenches for cables) are to be included in quoted rate. (c) Warranty: Minimum of 2 years on all equipment and workmanship. complete all as specified ad directed. by Engr-in-Chrage

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable of size 10 Sqmm flat complete all as specified ad directed. by Engr-in-Chrage

All as per item Sr No 31 above but of size 6 Sqmm.complete all as specified ad directed. by Engr-in-Chrage

Material and labour for coarse aggregate filling using stone gravels, rounded, of size n exc. 43 mm suitable to site, in the area covered by four/six pole structures complete all as specified and directed. by Engr-in-Chrage

Dismantling of the complete APFC of 125/100 KVAR 415 Volts from its position, opening for repair, preventive maintenance, servicing, including wiring, replacement of worn parts to make it fully functional, reassembling after repair, installation to its original position, connection with input/output supply, testing to its full load capacity all as directed & specified. NOTE :- (a). Spares / parts except minor repairs required for replacement shall be measured and paid separately. (b)Necessary wiring with 1.5 Sqmm Single Core FRLSH included in the above Cost.

Supply only Power Contactor MOC-15 ,3 pole 415 Volts capacity 15 amps AC 50HZ (for switching of capacitor ) all as directed.

Supply only Power Contactor MOC-5, 3 pole 415 Volts capacity 5 amps AC 50HZ (for switching of capacitor ) all as directed. by Engr-in-Chrage

Supply only 10 KVAR Heavy duty Power Capacitor 440 Volt,in APFC Panel complete all as specified and directed. by Engr-in-Chrage

Supply only 5 KVAR Heavy duty Power Capacitor 440 Volt,in APFC Panel complete all as specified and directed. by Engr-in-Chrage

Supply only 3 KVAR Heavy duty Power Capacitor 440 Volt,in APFC Panel complete all as specified and directed. by Engr-in-Chrage

Supply only 2 KVAR Heavy duty Power Capacitor 440 Volt,in APFC Panel complete all as specified and directed. by Engr-in-Chrage

Supply only 1 KVAR Heavy duty Power Capacitor 440 Volt,in APFC Panel complete all as specified and directed. by Engr-in-Chrage

Supply only CT of 100/5 all as specified and directed by Engr-in-Chrage

Supply only APFC relay 8 Stage including adon For APFC Panel complete all as specified ad directed. by Engr-in-Chrage

Supply only APFC relay 12 Stage including adon For APFC Panel by Engr-in-Chrage

Supply only MCB 3 pole 16 Amps 440 Volts all as specified and directed. by Engr-in-Chrage

Supply only MCB 3 pole 10 Amps 440 Volts all as specified and directed. by Engr-in-Chrage

Supply only MCB TP 32 amps 440 volts complete all as specified and directed by Engr-in-Chrage

Supply only flexible copper cable PVC insulated multi stranded of size 3 core 2.5 Sqmm 1100 Volts grade.complete all as specified ad directed. by Engr-in-Chrage

Supply only flexible copper cable PVC insulated multi stranded of size 3 core 4 Sqmm 1100 Volts grade. complete all as specified ad directed. by Engr-in-Chrage

SHRI HARI CONSTRUCTION (BID ID -3156140)

M/S JEELANI ELECTRICALS (BID ID -3151876)

M/S. ELECTROPOWER TECHNOLOGIES (BID ID -3151231)

MAHARASHTRA ENTERPRISES (BID ID -3151313)

SHREE SIDDHIVINAYAK TRADERS (BID ID -3151470)

SHRI RANI SATI TRADERS (BID ID -3151725)

Bidder Name

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

M/S JEELANI ELECTRICALS

MAHARASHTRA ENTERPRISES

metro electrical services

M/S. ELECTROPOWER TECHNOLOGIES

SHRI HARI CONSTRUCTION