SPL REP TO ROOF PLUMBING FLOORING AND RE WIRING OF BLDG NO P 96 JCOs MESS OF 11 MAHAR AT SI LINES 05 SRW UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down shutters of any descripition exc 1sqm but n exc 2sqm each and removing to or from store, complete all as specified and directed

Taking down shutters of any descripition n exc 1 sqm each and removing to or from store, complete all as specified and directed

Taking up or down 15mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.

Demolition of reinforced concrete in any description and in any position not otherwise specifically provided for (below or above ground level), complete all as specified and directed.

Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone masonery built in cement mortar, complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Cutting holes in brick walls exc half brick but not exc one brick in cement mortar ore cement lime mortor for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F Pre-painted galvalume aluminiu Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

M&L Providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops, copings an levelling concrete etc slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and including 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in epoxy adhisive complete all as specified and directed.

M&L for vitrified light shade tiles, 10 mm thick (Square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in pointed in white or coloured cement to match tile to match the colour of tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.

Roughening surface of old cement floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L 25mm thick PCC type B-1 1:2:4 (20mm graded aggregate) as in sub base of floor, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for making good under cills and over archs, lintels and bressummers including all pinning where necessary in cement mortar in 1:6, complete all as specified and directed.

Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed.

S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F 75mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F 100mm but hinges, extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for factory made, second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L 12 mm thick Plywood grade BWP, type BB fixed with screws to timber frame work, complete all as specified and directed

M&L 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed

S&F in repairs Continuous (piano) hinges, 40mm width of flaps mild steel, bright finish or electrogalvanised, complete all as specified and directed

M&L for Preparation new wooden surface of any decription and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.

M&L for Preparation old wooden surface of any decription and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F 300mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed.

S&F in repairs wall mixture telephonic with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, with & including hand shower & tube complete all as specified and directed. [MAKE:- Prayag (Wall mixer cat No.7270 or 7370, shower cat no.BH-73) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]

S&F hand shower (health faucet) brass with 1.0 mter long flexible tube and wall hook complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-81) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]

S&F Chromium plated grating doom 100 mm dia with waste hole, complete all as specfied and directed.

S&F PVC connection 15mm size with PTMT nuts of length 750 mm fixing complete all as specified and directed by engr in charge.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs 15 mm bib taps fancy type cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece single (Y) equal or unequal bend, 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece single (Y) equal or unequal bend, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

S&F in repair PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

S&F tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repair of vitreous China wash down water closet pan, casket type (pedestal pattern), with integral seat cover and flush tank, coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed (Make : Hindware Cat Part No. 92045 or equivalent make as per Appx 'C' (list of make) as approved by GE]

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12.5 cm wide with chromium plated bracket guard and railing 50 cm long complete all as specified and directed.

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8310) or equivalent in MARC/ JAQUAR/ make as per Appx 'C' (list of make) as approved by GE]

M&L 15 mm thick rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound, complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)

M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall/ceiling, complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L Brick work with Fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using modular bricks, complete all as specified and directed.

M&L brick work with Fly ash bricks in CM 1:4 using modular bricks straight or curved on plan to any radius, complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, polygonal rubble walling, brought up to course, complete all as specified and directed.

M&L for Struck pointing to squared rubble masonary , coursed or uncoursed in cement mortar 1:4, complete all as specified and directed.

M&L preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.

Supply only bitumen primer for use in waterproofing and damp proofing treatments, complete all as specified and directed

M&L for Reinforced cement concrete design mix M-25 in slabs supported on walls, beams & columns complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs as in roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished flat surfaces, complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L Preparation of new plastered surface and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed Make : Shalimar (Shaktiman)/ Asian (ACE) /Burger (Wall Menta) or equivalent in approved make by GE. (Note : Putty shall be measured and paid separately)

M&L for complete removal of existing treatment and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed Make : Shalimar (Shaktiman)/ Asian (ACE) /Burger (Wall Menta) or equivalent in approved make by GE. (Note : Putty shall be measured and paid separately)

M&L Preparation of new plastered surface and applying two coats of oil emulsion distemper over one coat of white cement based putty all as specified and directed. (Note : Putty shall be measured and paid separately)

M&L for complete removal existing treatment and applying two coats of oil emulsion distemper over one coat of white cement based putty all as specified and directed. (Note : Putty shall be measured and paid separately)

S&F in repairs aluminium anodised alloy harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconneting and refixing in position capacity exc 500 and n exc 1000 ltr. including Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc, complete all as specified and directed.

Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Taking down existing old roof treatment of any description, type and in any position including removal of old tiles, screed, felt, etc complete all as specified and directed.

M&L for grouting by pressure injection with cement slurry of 50kg cement mixed with pidicrete SM-225 gms of M/S pidilite industries ltd or Cobex 100 of M/S Fosroc Chemicals as per instruction, complete all as specified & directed.

M&L 25mm thick fillet of PCC type B-0 1:2:4 (12.5mm graded aggregate) 100mm wide and 100mm height in rounded/triangular shape shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrance should not be taken over at any steep turns and hence all corners/junctions should be rounded, for padding of roof complete all as specified and directed.

M&L 10 mm thick rendering in cm 1:4 on fair aces of bricks walls/concrete surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)

M&L for Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for water proofing roof treatment to Non accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3.5 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following sequence and specifications: (a) Complete removal of existing treatment including padding/plastering/PCC/Brickbat/coba or any type water proofing as per Item No. 103. (Note:- This item will be paid under item No. 103) (b) Conduct ponding test for 72 hrs, after ponding test grouting is to be done as per item No 121 at the leakage area. (Note : Ponding test will be paid under item No. 121) (c ) After the surface is repaired with pressure grouting the slab will be tested for water tightness again for 72 hrs before processing further treatment. (Note : Ponding test will be paid under item No. 121) (d) 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by wt of cement applied over roof slab. (Note : This item will be measured and paid separately under item No.106) ( e) The surface of the roof, parapet and gutters, drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. By wire brushing and dusting. For cast iron drain outlets the grow shall be cut around to tuck in the treatment as pipes, chimneys stacs etc and other similar situations to ease up about corners.

Item No. 108.00 Contd…. (f) Bituminous primer conforming to IS 3384-1986 @ 0.3Kg/Sqm to be applied and prepared surface till the surface is properly impregnated. (g) APP modified water proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturers instruction, the overlaps while torching shall be 100mm in both directions (longitudinal and transverse directions). All overlap joints shall be sealed thoroughly by thermofusing both the membrane layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. (h) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SVR latex @200ml per bag of cement and cured well before laying the memebrane. (j) Fillet of PCC (1:2:4) type B-0 of 100mm wide and 100mm height in rounded/triangular shape shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrance should not be taken over at any steep turns and hence all corners/junctions should be rounded. (Note : This item will be measured and paid separately under item No. 105) (k) 72 hrs testing of treatment for water tightness by ponding of water. (Note : Ponding test will be paid under item No. 121. All three stages of ponding vide sl 108.00 (b), (c) & (k) shall be measured as one unit)

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of of galvanised steel wire with cement mortar 1:3 complete all as specified. Note :- Galvanised steel wire netting shall be measured and paid separately.

S&F galvanised steel wire of mesh in size 12mm, 1.40mm nominal dia of wire and fixed with tinned tacks or galvanised wire staples

M&L for cutting grooves of size 70mm depth and 12mm wide in existing brick masonry/concrete block using diamond blade cutter machine to inserting TMT bar as required width and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed . Note:- TMT bar shall be measured and paid separately.

S&F 12 mm thick, toughen glass as in doors, partitions, window or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, locks fixed with wall /ceiling/floors, floor springs etc complete all as specified and directed.

S&F in repairs Gl frame work for plaster of paris board ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers etc complete all as specified and directed.

M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat/curved surface for any shunk and raised moulding over GI frame work and reinforced with G.I. wire mesh complete all as specified and directed

M&L for Plaster of paris cornies, shape and pattern as approved by GE complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insultion, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed

S&F solar control film 25 micron reflective (gareware sun control or equivalent) complete all as specified and directed

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

S&F in repairs ball brass valves, 25 mm size high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed

S&F anodised aluminium grill (anodised transperent or dyed to required shade according to IS : 1868 with min anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to existing window frame with CP brass/stainless steel screws @200 mm centre to centre, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed

M&L for carrying out ponding test for 72 hrs, after carrying out of grouting and roof treatment as per item No 108 (b), (c ) & (k) at the seepage/leakage area, complete all as specified and directed

S& F in repairs 15mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed

S& F in repairs 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed

S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, ISI marked, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA/ make as per Appx 'C' (list of make) as approved by GE]

S&F PVC connection 15mm size with PTMT nuts of length 750 mm fixing complete all as specified and directed.

Dismantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed

M&L for providing and fixing stainless steel (Gde 304) railing made of hollow tubes, channels, plates etc., incl welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete incl fixing the railing with necessary accessories and stainless steel botls etc., of required size on the top of the floor or the size of waist slab with suitable arrangement complete all as specified and directed

Dismantling water tanks and removing to store of capacity n.exc. 1000 ltrs capacity, complete all as specified and directed

Taking down carefully the old unserviceable aluminum point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, wall light fittigs, tube light fittings, surface light fitting, ceiling light fittings, any types of fittings etc and making good disturbed surfaces of walls including necessary touch up with the same finishes to surrounding wall, floors etc complete all as specified and directed.

M&L for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in concealed PVC conduit should not less than 20 mm dia and including juction covers and junction boxes, sunken cast iron/ pressed steel terminal boxes duly grouted in bricks cement or wooden planks wall and painted with red oxide metal primer for mounting of switches, sockets, fan regulator with 3 mm thick plastic laminated sheet top cover fixed with brass screwed and cup washers including making good to disturbed surfaces of wall in CM 1:3 with white/colour wash as per adjoining specifications including provision of continuous earth continuity wire of 1.5 sqmm copper PVC insulated insulated FRLS cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.

All as per Srl item No -132.00 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per Srl item No -132.00 here in before but for One light point controlled by two way switch complete all as specified and directed.

All as per Srl item No -132.00 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.

All as per Srl item No -132.00 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire, complete all as specified and directed.

All as per Srl item No -132.00 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4 Sqmm and 4 Sqmm as earth wire, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S&F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed.

S&F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed

S&F modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed

S&F modular switch socket combination multipurpose 6 pin 16 amp 3 module complete all as specified and directed

S&F modular fan regulator complete all as specified and directed

S&F in repair bell push flush type SP 5 Amp complete all as specified and directed.

S&F in repair electric bell single phase suitable for 240 V complete all as specified and directed.

S&F 5 Amp 2 way switch piano flush type single pole complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed.

S&F stepped type electronic fan regulator complete all as specified and directed

S&F LED tube light complete fitting, surface mounted lumanaires, 1 x 18 W, 240V. Decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack.with bipin holders, LED lamps, connector block, etc. complete with all accessories internally pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specfied & directed.

Refixing of serviceable light fitting any type any make retrieved against item No. 131 and size with connection complete all as specified and directed.

S&F angle holder insulated body with back plate for conduit fittings complete all as specified and directed.

S&F LED lamp 10 Watt B22 CDL complete all as specified and directed.

S&F building security light fitting 35 watt 230 v AC made up of pressure die cast aluminium housing with high effcient LED as lighting source and PC over having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with suitable galvanized iron pipe “light grade” brackets1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

S&F Exhaust fan 300 mm sweep metal body with louvers 240V complete with all accessories including making hole in stone/brick wall grouting suitable size with nuts/bolts & making good in all respects complete all as specified and directed.

S&F Exhaust fan 380 mm sweep metal body with louvers 240V complete with all accessories including making hole in stone/brick wall grouting suitable size with nuts/bolts & making good in all respects complete all as specified and directed.

Taking down carefully existing ceiling fan any type any make, incl servicing and painting of ceiling fan with white enameled paint and refixing after celaning and painting and connection with flexible copper wire upto ceiling rose and checking of nuts bolt washers & safety pin etc complete all as specified and directed.

S&F ceiling fan 1200 mm sweep single phase AC 220 Volts 50 HZ, 3 blades double ball bearing and connecting including provision of 3 core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from ceiling rose/connector to fan, etc including GI down rod of appropriate length as per site requirement, complete all as specified & directed.

S&F wall fan oscillating sweep 400 mm, 240V complete with all accessories all as specified and directed.

S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in surface PVC casing and caping size 20mm /PVC conduict dia 20mm including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor making good the disturbed surfaces and white wash or colour wash as per adjoining specifications , necessary junction box with covers including connections, PVC flexible pipes to be used while connecting the cable in DBs/Pannel, including taking down old unsv submain wiring complete all as specified and directed.

S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 10 sqmm (Nominal Area) FRLS stranded copper conductor drawn in surface PVC casing and caping size 20mm /PVC conduict dia 20mm including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor making good the disturbed surfaces and white wash or colour wash as per adjoining specifications , necessary junction box with covers including connections, PVC flexible pipes to be used while connecting the cable in DBs/Pannel, including taking down old unsv submain wiring complete all as specified and directed.

S&F in repairs sheet metal enclosure double door type surface mounted concealed in wall TPN 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed.

S&F MCCB 125 Amp, 3 Pole breaking capacity 16 KA with complete electrical connections by appropriate size of copper lugs, including taking down old unsv MCCB complete all as specified and directed.

S&F in repairs sheet metal enclosure double door type surface mounted concealed in wall TPN 4 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed.

S&F in repairs sheet metal enclosure double door type surface mounted concealed in wall SPN 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed.

S&F in repairs sheet metal enclosure double door type surface mounted concealed in wall SPN 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed.

S&F in repairs MCB TPN suitable for 240 volts, AC supply 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, including taking down old unsv MCB TPN complete all as specified and directed.

S&F in repairs MCB SP suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SP complete all as specified and directed.

S&F in repairs MCB SP suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, including taking down old unsv MCB SP complete all as specified and directed.

S&F in repairs MCB SPN suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, including taking down old unsv MCB SPN complete all as specified and directed.

S&F in repairs MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SPN complete all as specified and directed.

S&F Decorative wall mounting SS finish fixture with Lamp holder, PVC/Polycarbonate type with back plate suitable for oval glass batten fittings all accessories internally pre-wired and including connecting up with copper conductor cable with suitable size complete all as specified and directed.

Supply, fixing, connecting and testing of electric water heater (Geyser) stationary storage type, closed / vented type, vertical, including inner container of copper, capacity 25 Ltrs, 240 volts, 1500 Watts with two PVC pipe Nylon braided (suitable for hot water), 15mm dfia CP fancy type stop cocks, for inlet and out let purpose, anchor fastner, nuts, bolts and washer etc, with power cable 6 Sqmm copper conductors, complete all as specified and directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in with excavated soil of any type including spreading,leveling, watering and well ramming in layers n exc 25 cm thick.

Removing excavated material exc 50 m and not exc 500 mtr and depositing where directed complete all as specified and directed by Engr-In-Charge.

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.

Cutting of bituminous road/PCC hard standing/road/floor for laying of GI pipe upto 80mm dia (trench not more than 0.3m x 0.3m) for passing of cable including making good the disturbed surfaces all as per existing complete all as specified and directed.Note:-GI pipe shall be measured & paid separately under relevant items of this schedule.

M & L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed. Note: Unit rate of earthing deemed to be included with GI wire 4 mm, GI pipe light grade protection pipe 15 mm up to 7.5 RM.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 50 sqmm, 3.5 core, 1100 volts grade, laid in trenches, fixed to pole, passing through pipes/ducts, etc complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed.

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

S&F in repair post top light fitting new generation energy saving environmental friendly, long life esthetically designed with symmetrical light destribution spun aluminium landscape luminare with high power LEDs as light source complete all as specified and directed.

Taking up or down 50mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.

Taking up or down 40mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connection and including cleaning for refixing or removal to stores, complete all as specified and directed.

Refixing old steel tubing 50 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 40 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 25 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 50 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 40 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 50mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed

S&F in repairs 40mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed

S&F in repairs 25mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed

Deduct Schedule of credit (calculation will be done off line) Rs. 50785.00

Vee kay construction