Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹24.9 L+₹2.1 L (9.29%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹25.2 L+₹2.4 L (10.6%)Rejected-Finance 06 SACHIN SANTOSH DALVI G T HOSPITA CSMT MUMBAI MAHARASHTRA 400001 UDYAM MH 19 0135994 27ALQPD7257B1Z2 R M | MUMBAI | MAHARASHTRA | 400001 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹27.0 L+₹4.1 L (18.2%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹27.2 L+₹4.4 L (19.2%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8479 REPAIR AND MAINT TO CERTAIN BUILDINGS AT INS TRATA UNDER AGE BR II UNDER GE NW KUNJALI
2022_MES_551335_1
8479/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹80,000
Yes
24 Jan 2023
12 Sept 2022
10 Oct 2022
19 Sept 2022
8 Oct 2022
26 Sept 2022
12 Sept 2022 - 19 Sept 2022
Amount
Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S&F, stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.
S & F, 30 mm thick Second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profile with MS square tube, supplying and fixing in opening as per specifications & directed by Engineer-in-charge.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.
S&F 150 mm size extruded aluminium handle, fabricated type, anodiesed complete all as specified & directed by Engineer-in-charge.
M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer
Demolition of cement concrete ground floors and paving not exc 15 cm thick (below or above GL)
Dismantling floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.
M & L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,(600mm x 600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.
M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4 etc.
M&L for granite 20mm thick of any type work ( table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed.
M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified
M&L for PCC 1:2:4 type B1, 50mm thick using 20mm graded stone aggregate as in flooring
M& L for PCC 50mm thick type C1 1:3:6 (using 20mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight
Demolition of brick/stone masonry built in CM. all as specified.
M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified directed.
M&L for brick work with sub class B bricks straight or curved on plan in half brick thick wall in CM 1:4 complete all as specified.
S & F in repair vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary fixing complete
S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete
S & F plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete in repairs
S & F in repair Bib tap 15mm dia cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F in repair Pillars tap 15mm dia fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F in repair 20mm stop cock fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc
S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets
S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete
S & F in repair kitchen sink made of stainless steel 1mm thick with plugs, washers including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mmx330mmx160mm
S & F in repair for pressure jet for western type water closet with PVC connection 600 to 900 mm long including brass head screw and suitable washer.
S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete.
S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge
S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc.
Taking up or down steel tubing 15mm dia and connections including cleaning for refixing
-Ditto- All as per Item No 47 above but 20mm dia
S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc
-Ditto- All as per Item No 49 above but 20mm dia
S & F PVC (SWR) multi floor trap 75mm dia with grating including joint with solvent cement
S & F in repair Chromium plated tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc.
Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)
Dismantling water tanks and removing to store exceeding 500 but not excd 1000 Lter capacity
S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs.
-Ditto- All as per item No 55 above but 1000 ltr capacity.
S&F PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferule and fixed in repairs.
Disconnecting existing tanks exc 250 ltr and not exc 500 ltr capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
Disconnecting existing tanks n exc 250 ltr capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
Cleaning and removing all scale and dirt in tanks exc 250 ltr and not exc 500 ltr capacity , etc, from tanks and from mouths of circulating pipes, etc.
Cleaning and removing all scale and dirt in tanks n exc 250 ltr capacity , etc, from tanks and from mouths of circulating pipes, etc.
Dismantling wrought iron or mild steel work of any description not othervise provided for that purpose.
S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) type of Fe 410-W (Gde E- 250) quality 'A', complete all as specified & directed by Engineer in charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engineer-in-charge.
S&F Prepainted galvanume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws
S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.
S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end
Cutting chases pinning in for concealed water tubing etc and making good cutting not exc 10cm in width or girth to brick/stone wall or concrete surfaces
Taking down cement or cement lime plaster, any description on brick or stone surfaces of any position etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear for any plastering complete all as specified & directed by Engineer-in-charge.
M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L for rendering 10 mm thick plaster in cement mortar (1:3) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).
M & L for plastering 5mm in CM 1:4 on ceiling / chajja complete all as specified and directed.
M & L for two coats of cement base paint over a coat of cement primer on walls or newly plastered surfaces
M & L for preparation of new plastered surfaces and applying three coat of white wash on walls complete
M&L for preparation of new plastered surfaces of wall and applying two coats of destemper oil emulsion over a chalk whiting and as directed by Engr-in-charge.
M & L for preparation of new plastered surfaces and applying three coat of white wash on ceiling
Preparation of old decorated surfaces and applying one coat of white wash on ceiling including in narrow width, bands, cornices, pilasters etc., complete all as specified and as directed
Preparation of old decorated surfaces and applying one coat of cement base paint on walls including in narrow width, bands, cornices, pilasters etc., complete all as specified and as directed
Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces over 10cm width or girth complete all as specified and as directed.
Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces over 10cm width or girth complete all as specified and as directed.
S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.
S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union
M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using grey cement and pigment of any shape and size conforming to IS 15658 - 2006, complete. Note :- Pattern of tiles to be Rubber moulded or equivalent as approved by GE.
M & L for 30mm thick sand cushion, filling under floors or in foundations including watering and consolidation
S & F Chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cement and pigments, set jointed in neat cement slurry as in floors/path etc over and including 15mm thick screed bed in CM 1:6 complete.
Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed.
M&L for 40 mm thick Cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 85 mm as per the requirement all as directed and specified complete.
M&L for 10mm thick screed plaster on roof in CM 1:4 for laying waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)
Supply only integral Waterproofing compound.
M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane all as speficied and directed.
Dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately)
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded stone aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 all as directed.
M& L for Providing precast cement concrete Type C1 (1:3:6) by using 20mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete with joints to match the existing.
S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling alongwith 12mm thick Gypsum board in ceiling including dismantling of wall and ceiling boards (fibre, pulp, insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
M & L complete removal of existing treatment of old decorated surfaces of walls, soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scaffolding complete all as specified and as directed.
SB CONSTRUCTION
Sachin santosh dalvi
Unitech Enterprises
MADHU ENTERPRIZES
H R Enterprises
SAIRAM CONSTRUCTION
Genius Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .