Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-Finance 11A LAXMI VIHAR BANDHAN PALACE WALI GALI MODIPURAM MEERUT UTTAR PRADESH 250110 | MEERUT | UTTAR PRADESH | 250110 | ₹11.8 L | L1 | Accepted-Finance BEING LOWEST |
| 2 | L2₹14.2 L+₹2.4 L (20.3%)Rejected-Finance EAST DIGHI TANK OLD LIC CAMPUS NEAR BALAJI MARKET GAYA 823001 BIHAR | GAYA | GAYA | BIHAR | 823001 | ₹14.2 L+₹2.4 L (20.3%) | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹14.9 L+₹3.1 L (25.8%)Rejected-Finance EAST DIGHI TANK OLD LIC COMPOUND GAYA BIHAR 823001 | GAYA | BIHAR | 823001 | ₹14.9 L+₹3.1 L (25.8%) | L3 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | M/s Vinay Kumar L3 | SINGHAL ENTERPRISES L1 | M/s Subham Traders L2 |
|---|---|---|---|---|---|---|
| 1.00 | M & L for lifting of unserviceable submersible motor & pump set of capacity 125 HP, three phase from bore hole of tubewell located at Khiriama Pump Hosue by disconnecting column pipes one by one with the help of chain pulley block after all disconnecting electrical and water connections from pump set and transporting the same to authorised workshop after de-coupling motor & pump for carrying out repair and bringing back the same to site, lowering of coupled motor pump set in borewell by making submersible cable joint water proof, flange joints with new nuts, bolts & washers, leather gasket/packing with proper alignment, binding of cable with column pipe with nylon rope and testing on completion complete all as specified and directed. Repair/replacement works to be carried on motor and pumps are mentioned here-in-after. Note: (i) Cost of taking up & lowering of column pipes, transportation of pumps & motor to workshop & back shall be deemed to be included in the rate quoted. (ii) All the items/parts mentioned in item Srl No. 1(a) to 1(n) here-in-after shall be suitable/compatible for the existing type and make of pumping set. (iii) Required T & P such as chain pulley block shall be contractor's responsibility. (iv) Repair/ replacement of shall be done within a period as intimated failing which necessary recovery shall be made. complete all as specified and directed. | 1 | Each Job | 7,500 ₹7,500 | 9,000 ₹9,000 | 5,000 ₹5,000 Lowest |
| 2.00 | 1(a) M & L for cutting and taking out the winding from stator slots of motor & cleaning the slots and rewinding the same by super enamelled copper wire PVC coated of existing size, weight and pattern including all insulation material complete all as specified and directed. | 1 | Each Job | 1,30,000 ₹1,30,000 | 60,000 ₹60,000 Lowest | 85,000 ₹85,000 |
| 3.00 | 1(b) M & L for replacement of upper & lower bush bearing of 125 HP pumpset as existing size made out from gun-metal complete all as specified and directed. | 1 | Set of 2 | 6,000 ₹6,000 Lowest | 15,000 ₹15,000 | 7,500 ₹7,500 |
| 4.00 | 1(c) M & L for replacement of sand gaurd of 125 HP pumpset as existing size complete all as specified and directed. | 1 | Each job | 6,500 ₹6,500 Lowest | 8,000 ₹8,000 | 6,500 ₹6,500 Lowest |
| 5.00 | 1(d) M & L for remetaling of shaft, turning, grinding as per the required size including provision for Key groove, key and coupling as per exisiting | 1 | Each job | 5,500 ₹5,500 Lowest | 8,000 ₹8,000 | 5,500 ₹5,500 Lowest |
| 6.00 | M & L for lifting of unserviceable submersible motor & pump set of capacity 60 HP, three phase from bore hole of tubewell located at Khiriama Pump Hosue by disconnecting column pipes one by one with the help of chain pulley block after all disconnecting electrical and water connections from pump set and transporting the same to authorised workshop after de-coupling motor & pump for carrying out repair and bringing back the same to site, lowering of coupled motor pump set in borewell by making submersible cable joint water proof, flange joints with new nuts, bolts & washers, leather gasket/packing with proper alignment, binding of cable with column pipe with nylon rope and testing on completion complete all as specified and directed. Repair/replacement works to be carried on motor and pumps are mentioned here-in-after. Note: (i) Cost of taking up & lowering of column pipes, transportation of pumps & motor to workshop & back shall be deemed to be included in the rate quoted. (ii) All the items/parts mentioned in item Srl No. 1(a) to 1(n) here-in-after shall be suitable/compatible for the existing type and make of pumping set. (iii) Required T & P such as chain pulley block shall be contractor's responsibility. (iv) Repair/ replacement of shall be done within a period as intimated by the Engineer-in-Charge failing which necessary recovery shall be made. | 1 | Each Job | 3,500 ₹3,500 Lowest | 12,000 ₹12,000 | 4,500 ₹4,500 |
| 7.00 | 2(a) M & L for cutting and taking out the winding from stator slots of motor & cleaning the slots and rewinding the same by super enamelled copper wire PVC coated of existing size, weight and pattern including all insulation material complete all as specified and directed. | 1 | Each Job | 45,000 ₹45,000 Lowest | 60,000 ₹60,000 | 65,000 ₹65,000 |
| 8.00 | 2(b) M & L for replacement of upper & lower bush bearing of 60 Hp pumpset as existing size made out from gun-metal complete all as specified and directed. | 1 | Set of 2 | 4,000 ₹4,000 Lowest | 15,000 ₹15,000 | 5,500 ₹5,500 |
| 9.00 | 2(c) M & L for replacement of sand gaurd of 60 HP pumpset as existing size complete all as specified and directed. | 1 | Eachjob | 4,000 ₹4,000 Lowest | 8,000 ₹8,000 | 4,000 ₹4,000 Lowest |
| 10.00 | 1(d) M & L for remetaling of shaft, turning, grinding as per the required size including provision for Key groove, key and coupling as per exisiting | 1 | Each job | 3,000 ₹3,000 Lowest | 8,000 ₹8,000 | 3,500 ₹3,500 |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
8 Jul 2026, 6:00 pmClosed
Garrison Engineer Gaya
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
REPAIR MAINT OF SUBMERSIBLE PUMPS, CENTRIFUGAL PUMPS, SWIMMING POOL, STARTER PANELS AND ALLIED WORKS AT MIL STN GAYA
2026_MES_770134_1
8039/GE/26-27/E8
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Gaya
Please ref tender documents
7 documents required · 7 mandatory
₹500
GE Gaya
₹26,000
16 Sept 2026
5 Jun 2026
11 Jul 2026
5 Jun 2026
8 Jul 2026
19 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for lifting of unserviceable submersible motor & pump set of capacity 125 HP, three phase from bore hole of tubewell located at Khiriama Pump Hosue by disconnecting column pipes one by one with the help of chain pulley block after all disconnecting electrical and water connections from pump set and transporting the same to authorised workshop after de-coupling motor & pump for carrying out repair and bringing back the same to site, lowering of coupled motor pump set in borewell by making submersible cable joint water proof, flange joints with new nuts, bolts & washers, leather gasket/packing with proper alignment, binding of cable with column pipe with nylon rope and testing on completion complete all as specified and directed. Repair/replacement works to be carried on motor and pumps are mentioned here-in-after. Note: (i) Cost of taking up & lowering of column pipes, transportation of pumps & motor to workshop & back shall be deemed to be included in the rate quoted. (ii) All the items/parts mentioned in item Srl No. 1(a) to 1(n) here-in-after shall be suitable/compatible for the existing type and make of pumping set. (iii) Required T & P such as chain pulley block shall be contractor's responsibility. (iv) Repair/ replacement of shall be done within a period as intimated failing which necessary recovery shall be made. complete all as specified and directed. | 1 | Each Job | - | - |
| 2 | 1(a) M & L for cutting and taking out the winding from stator slots of motor & cleaning the slots and rewinding the same by super enamelled copper wire PVC coated of existing size, weight and pattern including all insulation material complete all as specified and directed. | 1 | Each Job | - | - |
| 3 | 1(b) M & L for replacement of upper & lower bush bearing of 125 HP pumpset as existing size made out from gun-metal complete all as specified and directed. | 1 | Set of 2 | - | - |
| 4 | 1(c) M & L for replacement of sand gaurd of 125 HP pumpset as existing size complete all as specified and directed. | 1 | Each job | - | - |
| 5 | 1(d) M & L for remetaling of shaft, turning, grinding as per the required size including provision for Key groove, key and coupling as per exisiting | 1 | Each job | - | - |
| 6 | M & L for lifting of unserviceable submersible motor & pump set of capacity 60 HP, three phase from bore hole of tubewell located at Khiriama Pump Hosue by disconnecting column pipes one by one with the help of chain pulley block after all disconnecting electrical and water connections from pump set and transporting the same to authorised workshop after de-coupling motor & pump for carrying out repair and bringing back the same to site, lowering of coupled motor pump set in borewell by making submersible cable joint water proof, flange joints with new nuts, bolts & washers, leather gasket/packing with proper alignment, binding of cable with column pipe with nylon rope and testing on completion complete all as specified and directed. Repair/replacement works to be carried on motor and pumps are mentioned here-in-after. Note: (i) Cost of taking up & lowering of column pipes, transportation of pumps & motor to workshop & back shall be deemed to be included in the rate quoted. (ii) All the items/parts mentioned in item Srl No. 1(a) to 1(n) here-in-after shall be suitable/compatible for the existing type and make of pumping set. (iii) Required T & P such as chain pulley block shall be contractor's responsibility. (iv) Repair/ replacement of shall be done within a period as intimated by the Engineer-in-Charge failing which necessary recovery shall be made. | 1 | Each Job | - | - |
| 7 | 2(a) M & L for cutting and taking out the winding from stator slots of motor & cleaning the slots and rewinding the same by super enamelled copper wire PVC coated of existing size, weight and pattern including all insulation material complete all as specified and directed. | 1 | Each Job | - | - |
| 8 | 2(b) M & L for replacement of upper & lower bush bearing of 60 Hp pumpset as existing size made out from gun-metal complete all as specified and directed. | 1 | Set of 2 | - | - |
| 9 | 2(c) M & L for replacement of sand gaurd of 60 HP pumpset as existing size complete all as specified and directed. | 1 | Eachjob | - | - |
| 10 | 1(d) M & L for remetaling of shaft, turning, grinding as per the required size including provision for Key groove, key and coupling as per exisiting | 1 | Each job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
8039Tenderdocuments.pdf
Tender Documents • 1.00 MB
BOQ_862451.xls
BOQ • 3.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .