KMC/MDPS/P1JST/45/25-26

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 3. Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC B. REPAIRING 1. Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed.(a) From 1st floor level.

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC A. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m. 1) ISMC channel (250mm ht. x 80mm wide x 7.1mm web thickness x 14.1mm flange thickness x 3000 mm length) = 90.21kg

Supplying, fitting, fixing bolts with nuts, washer: (i) 10 to 16 mm dia: (b) Length above 75 mm and upto 150 mm.

Supplying, fitting, fixing bolts with nuts, washer: (i) 20 to 25 mm dia bolt: (b) Length above 75 mm and upto 150 mm.

Drilling holes of requisite diameter inR.S. joists channels, tees, Plates etc. b) (I) Dia.above 12mm and depth upto 10 mm.

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. (Payment to be made on area of cut surface).

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC A. ORIGINAL WORKS 8. M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) (To be used for repair works only).

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld.

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld.

BUILDING WORKS (K) PAINTING, VERNISHING ETC. A. ORIGINAL WORKS 1. (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

BUILDING WORKS (K) PAINTING, VERNISHING ETC. A. ORIGINAL WORKS 2(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : (iv) Two coats (with any shade except white).

BUILDING WORKS (C) Brickworks, Concrete Works etc. 10. Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety.

Fitter Mechanic @Rs. 326/each + 10% agency profit= Rs. 358.60

Fitter Mechanic (Helper) @Rs. 270/each + 10% agency profit= Rs. 297.00

Mazdoor (Male) @Rs.245/each + 10% agency profit= Rs.269.50

Sub Total

Please Enable Macros to View BoQ information