Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 CrAccepted-AOC | ₹1.8 Cr | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹2.2 Cr+₹41.5 L (23.4%)Rejected-Finance H NO 2 2 1137 6 D NEW NALLAKUNTA HYDERABAD TELANGANA 500044 | HYDERABAD | HYDERABAD | TELANGANA | 500044 | ₹2.2 Cr+₹41.5 L (23.4%) | L2 | Rejected-Finance Not being L1 bidder |
| 3 | L3₹2.5 Cr+₹75.1 L (42.3%)Rejected-Finance NO D NO 3 43 NAGENDRA COLONY KOTHAPALEM GOPALAPATNAM VISAKHAPATNAM 530027 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530027 | ₹2.5 Cr+₹75.1 L (42.3%) | L3 | Rejected-Finance Not being L1 bidder |
| 4 | Rejected-Technical | - | - | Rejected-Technical Firm is not enlisted in category c(iii). Hence, rejected |
| 5 | Rejected-Technical CHHATABAD HABIB MENSION KATRASGARH DHANBAD DHANBAD 828113 JHARKHAND INDIA | DHANBAD | DHANBAD | JHARKHAND | 828113 | - | - | Rejected-Technical Slow progress remarks in WLR for the QE Mar 2025 issued by HQ ADG (P) Chennai. Hence, rejected |
| Sl No | Description | Qty | Unit | Dinesh Engineering Enterprises L1 | M/s. Tojym Steel Products L2 | deeta-tech enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling of existing EOT cranes 20 Ton and 10 ton capacity (with 2 ton auxiliary with each crane) at 05 bldg. (20T), 04 bldg. (20T) and 06 bldg.(10T) at LC-III ITR Chandipur and deposited to MES store yard complete all as specified and directed. | 3 | Each Job | 90,000 ₹2,70,000 Lowest | 1,50,000 ₹4,50,000 | 1,70,433 ₹5,11,299 |
| 2.00 | Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 20 Ton for main hoist and 2 Ton for auxiliary hoist, double girder, with a span 13.5 m, lifting/hook height 8 m, bay length 34.95m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation complete all as specified and directed with and including the followings: -
Crane Details:-
(i) Duty Class: M5 for Indoor operations.
(ii) main hoist Lifting Capacity: 20 Ton.
(iii) mini hoist Lifting Capacity: 02 Ton.
(iv) Span:13.50 Metre.
(v)Hook Height : 8.0 Meter.
(vi) LT Wheel Rail Track Size: R-52.
(vii) Bay Length: 34.95 Meter.
(viii) Clearance between Rail Top to Enclosure Roof: As per design approved.
(ix) Hoist: Hoist should be as per IS: 3938 (latest version) of Only Low Head Room Hoist shall be acceptable.
(x) Maximum Speed (Meter / Min.):-
(a) Hoisting: 3
(b) Cross Travel: 10
(c) Longitudinal Travel: 15. | 1 | Each | 54,99,000 ₹54,99,000 Lowest | 79,35,000 ₹79,35,000 | 90,90,000 ₹90,90,000 |
| 2.01Item No 2.00 Contd..// (xi).Hoisting Mechanism with specially designed crab unit for double girder, engineered for smooth jerk free, and soft start, lifting of loads. Hoist drive with micro drive through VVVF drive selected according to the class of duty, driving the rope drum, through helical gear box. The rope drum shall be made out of seamless pipes fabricated from plates tested as per ASTM/IS standards. (xii) Hooks:- Hooks shall be shank type supported on anti friction thrust bearing and the sleeve pulleys shall be made out of malleable cast iron or fabricated, conforming to IS: 3815. (xiii) Controls: The crane shall be controlled by pendant. The main electrical components shall be housed in sheet steel enclosures suitable for indoor application conveniently located for easy maintenance. Standard protection devices for overload protection and short circuit protection shall be provided. (xiv) Hoist Wire Rope : Fibre core confirming to IS: 2266. Mention Wire rope dia, No. of fall & Construction. Minimum Factors of Safety & Tensile Strength (1960N/mm² for wire rope) as per ISO:4309:1990.(Contractor to Comply &submit details for approval) (xv) Lifting Hook: Drop Forged with latch, Plain ‘C’ type, Swivelling on Thrust Bearing, Duly tested as per IS: 15560 (latest version) (Contractor to Comply & submit details for approval) (xvi) Buffers (End Stoppers): Buffers of adequate size shall be provided. (xvii) Maintenance Platform: Maintenance / service platform of load carrying capacity approximate 250 Kgs. of sufficient width shall be provided & fixed through bolted joints only. A hand railing sufficient height Contractor to provide and toe guard (Min 100mm) shall also be provided. Platform shall have anti-skid grating. (xviii) Guards: All the moving parts should be duly covered with guards as per safety norm. Proper guard / cover / tray to prevent falling of bolts from coupling etc should also be provided, wherever required. (xix) Gear Boxes:- Gear Boxes with helical gears, oil lubricated, manufactured using the modern gear cutting machines, duly heat treated to withstand the stringent load conditions and selected according to class of duty commensurate with type of application. | ||||||
| 2.02Item No 2.00 Contd..// (xx) Gears Details: Gear Box should be of fabricated type duly stress relieved. Pinions made of En 24 and gears of En 18. Gears in all the Stages shall be helical in design and to be of machined, lapped and hardened Straight and helical spur gearing shall normally be used for all motions. Worm and bevel gears shall not be used. First and high speed reductions shall be through helical gears. All first reduction pinions and also the other pinions if feasible shall be integral with the shafts. All gears shall be of hardened and tempered alloy or carbon steel with machine cut teeth. Gear tooth shall be cut in metric module system. Surface hardening of teeth is not allowed. The Gears / pinions should be hardened to HRC 50-55 and ground. Please note that gears and pinions must have pressure angle of 20° only. (xxi) Brakes:- Brakes for all the motions shall be Flameproof Electro-magnetic shoe/Flameproof hydraulic thruster brakes according to the application. (xxii) End carriages: End carriages with standard wheel bases fabricated using the modern welding and machining techniques to ensure jerk free and smooth travel motion. The wheels shall be double flanged, supported on self aligning anti-friction bearings, Buffers shall be provided at the ends of the carriage as per IS Standards. (xxiii) Wheels: Tread area of LT & CT Wheels shall be lined with High quality Phosphorus Bronze of suitable thickness to sustain Standard Working Load (SWL). (xxiv) Lubrication: Suitable lubrication system shall be provided for gear box, all rotating parts wherever applicable. Details of the same to be furnished indicating the type & quantity of Lube Oil & grease etc. (xxv) Rope Drum: Shall be of fabricated type stress relieved or seamless pipe. The circumferential weld joints shall be tested by 100% X-Ray quality. (xxvi) Type of Coupling: Couplings should be flexible geared Barrel type. No pin / bush / rubber type coupling to be used. (xxvii) Machining Operation: All mechanical mating surfaces and wheel seating areas are to be machined to the required finish and protected. | ||||||
| 2.03Item No 2.00 Contd..// (xxviii) Input Power Supply: Shall be 415 ± 10% Volts, 50 ± 3% Hz, 3 Phase, AC. (xxix) Control Voltage: Shall be 110V AC. (xxx) Protection: All Panels, Limit- Switches and Motors shall have IP 54 protection & shall be flameproof Enclosure. Motor Details: Squirrel Cage Induction Crane, Totally enclosed, fan cooled, Insulation Class-F & confirming to relevant latest IS:325, and IS-123, S4 duty, 150 starts per hour and 40% CDF. Contractor to provide other details like No. of motors, capacity of motor, Frame size, make, type and No. of poles etc. (xxxi) Wiring: All the panel wiring should be done by using standard multi core Copper flexible FRLSH cable. (xxxii) Type & details of Brakes for all motions: Conical rotor type or "Fail to safe" action type flameproof Electromagnetic shoe / flameproof disc brakets type to be provided to hold the mechanism in position instantaneously as soon as the power supply is 'OFF' either accidentally or intentionally for all motions. (xxxiii) Electric Contactors: shall have SIEMENS / L&T / GE contactors suitable for Crane operations. (xxxiv) Contactors Rating:- The rating of all Contactors shall be at least 50% higher than the respective electric motor full load current, at the specified duty cycle. (xxxv) Earthing for Electrical items in Crane: Shall be carried out as per IS. (xxxvi) Trailing Cables/Rubber Cables: Trailing cables/Rubber cables (Extra flexible having copper conductors only) should be travelling on rollers moving on separate IBeam parallel to Bridge Girder and both for LT & CT and from ground panel to panel of crane shall be supplied and Erected by contractor. (xxxvii) Limits Switches: Hoist shall be provided with both Flameproof rotary and Flameproof counter weight type (Over Hoisting and Over lowering) Shunt, adjustable type limit switches. Limit switches shall be provided for both CT & LT. Two way lever type for CT both direction and LT both direction. Supply and Erection of DSL: Suitable capacity DSL to be provided by contractor for CT & LT and it is part of scope of contract. | ||||||
| 2.04Item No 2.00 Contd..// (xxxviii) Pendent: Flameproof Pendent should be of Die cast Aluminium or Hard un-breakable plastic having push buttons for each motion e.g. Bridge light, Siren/bell On and off switches and stay put type emergency stop switch along with mode (RRC or Pendant) selector switch. Pendent shall be hanged in the middle of Bridge Girder with Chrome plated steel chain & duly covered with sleeve. (xxxix) All other incidental, Civil, Electrical and Mechanical works other than specified above but required at site will be done by contractor. (xl) LT Panel : Ground LT panel of required rated capacity as per installed crane with MCCBs and other accessories will be supplied by contractor and rate is deemed to included in above rate. (xli).Type, Capability and general requirements: Type: Double Girder Box Type EOT Crane as per IS: 807 & IS: 3177 (latest version) Crane Operation: Through Radio Remote Control as also with Pendant control of Reputed Make with Push Button for ON, OFF, UP, DOWN, Forward, Reverse, Left, Right, Siren, Bridge Light & Emergency Stop with option for control selection. Operating Voltage 24Volts, all will be submitted by contractor for approval of Garrison Engineer. (xlii) Illumination: 2 Nos. of not less than 35 Watts LED Lamps & fittings shall be provided under the Bridge and 1 No. shall be provided under CT Trolley. Fittings shall be of non-integral type. (Total lights 3 Nos.). (xliii) Painting Instructions: (a) Surface Cleaning: Girder to be shot blasted or chemically treated for surface cleaning, after completion of all operations but prior to painting. Contractor to furnish the details of facilities for Shot Blasting M/c at their/OEM's works. (b) Painting: One coat of Red Oxide Primer with 25 micron DFT (Dry Film Thickness) and 48 hours of compulsory curing after painting (c) The crane should be thoroughly cleaned and final painting with two coats of Flameproof Resistant Paint (Colour –Golden Yellow) each with a DFT of 25 micron and intermittent curing of 16 hours. Final touching will be done after erection & commissioning at site if required. | ||||||
| 2.05Item No 2.00 Contd..// (xliv) Environment condition:- The shop floor environment will be dust prone, humid, Corrosive (Due to coastal area)Weather conditions are tropical. Crane shall be kept in the normal shop floor condition without any temperature controlled enclosure / shop. Max. temperature variation is 25 deg Celsius in 24 hours. Sound level should be minimum and the crane should have decent aesthetic look. Ambient Temperature: 4º C - 50º C & relative Humidity: 95% | ||||||
| 3.00 | Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 20 Ton for main hoist and 2 Ton for auxiliary hoist ,double girder, with a span 8.5 m, lifting/hook height 8 m, bay length 19.60m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation, with and including the followings: -
(i) Duty Class: M5 for Indoor operations.
(ii) main hoist Lifting Capacity: 20 Ton.
(iii) mini hoist Lifting Capacity: 02 Ton
(iv) Span:8.50 Metre.
(v)Hook Height : 8.0 Meter.
(vi) LT Wheel Rail Track Size: R-52.
(vii) Bay Length: 19.60 Meter.
(viii) Clearance between Rail Top to Enclosure Roof: As per design approved.
(ix) Hoist: Hoist should be as per IS: 3938 (latest version). Only Low Head Room Hoist shall be acceptable.
(x) Maximum Speed (Meter / Min.):
(a) Hoisting: 3
(b) Cross Travel: 10
(c) Longitudinal Travel: 15.
Rest all as per Srl No 2.01 to 2.05 here-in-before. | 1 | Each | 65,79,000 ₹65,79,000 Lowest | 74,75,000 ₹74,75,000 | 83,70,000 ₹83,70,000 |
| 4.00 | Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 10 Ton for main hoist and 2 Ton for auxiliary hoist ,double girder, with a span 13.5 m, lifting/hook height 8 m, bay length 35.77m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation, with and including the followings: -
(i) Duty Class: M5 for Indoor operations.
(ii) main hoist Lifting Capacity: 10 Ton.
(iii) mini hoist Lifting Capacity: 02 Ton
(iv) Span:13.50 Metre.
(v)Hook Height : 8.0 Meter.
(vi) LT Wheel Rail Track Size: R-52.
(vii) Bay Length: 35.77 Meter
(viii) Clearance between Rail Top to Enclosure Roof: As per design approved.
(ix) Hoist: Hoist should be as per IS: 3938 (latest version) of Only Low Head Room Hoist shall be acceptable.
(x) Maximum Speed (Meter / Min.):
(a) Hoisting: 3
(b) Cross Travel: 10
(c) Longitudinal Travel: 15.
Rest all as per Srl No 2.01 to 2.05 here-in-before. | 1 | Each | 54,00,000 ₹54,00,000 Lowest | 60,40,000 ₹60,40,000 | 72,90,000 ₹72,90,000 |
| 5.00Notes for item No. 2.00 to 4.00 :- (1). The crane is to designed by the contractor/OEM/Manufacturer. Major Technical specifications of the crane are given above and given in Particular Specifications here-in-after. These are to be complied with by the contractor/OEM/Manufacturer. The parameters which are not specified are to be as per Contractors'/OEM's own design. The contractor shall submit following drawings, giving all design parameters and get the drawings approved from the Garrison Engineer. The drawings shall be complete in all respect. Drawing :- (a) GA Drawing of the Crane (for approval). (b) GA Drawing of Hoist / Trolley (for approval). (c) Calculations for Bridge Girder. (d) GA Drawing of Individual Mechanisms (for approval). (e) Drawings of Bridge, End Carriage, Leg and their connections. (f) Sub-Assembly Drawing for Wheels, Gear Boxes & Hoist. (g) Calculations for Selection of Electric Motors, Gears, Brakes, Couplings, Wheels, Wire Rope etc. (h) Design calculations for Bridge Girder, Crab etc. (i) Wiring Diagram with Logic Circuits and Bill of Material (for approval). (j) Cable Selection based on current rating. (2). The various dimensions given above are approximate. The contractor is advised to verify the ground details as well as visit the site of work for accurate measurements of these dimensions. In any case before undertaking fabrication work the contractor must ascertain the final finished dimensions. The subject crane is meant for the purpose of handling small to medium load of various components. The crane will be put to use for 365 Days’ continuous duty with CT, LT and Hoist movements . The department shall be responsible for providing suitably rated electrical outlet in the Main Electrical Control Panel/Main Distribution Board of the buildings . The contractor shall certify that these are sufficient and meets the requirements of his design. (3) Levelling of gantry to be carried out before installation of crane at site and deemed to be included in the quoted cost. (4) The bidder has to sign an MoU with one of the approved manufacturer specified in the tender documents for designing, supply, installing , testing and commissioning of cranes. The MoU shall be submitted to the Garrison Engineer (I) R&D Chandipur before commencement of the work. (5) The tenderer shall visit the site before quoting the tender and have the letter confirmation from MES that firm has visited the site and shall upload the letter documents alongwith tender documents on portal. (6) Motors, brakes, limit switches, push button stations, electrical fittings, inching facility (for up & down motion as well as forward & reverse motion), local control panel, rope drum & hook and any other items missed in the tender but to be part of flameproof crane is deemed to be included in the quoted cost. (7) The cost of necessary civil work for installation of crane system or any other accessories required for proper installation & function of crane but not mentioned in the tender is also deemed to be included in the quoted rate. | ||||||
Tender Value
₹2.4 Cr
EMD Value
₹3.1 L
Closing Date
5 Jul 2025, 6:00 pmClosed
Chief Engineer (RnD) Delhi
HQ Chief Engineer (RnD) Delhi Probyn Road Delhi-54
REPLACEMENT OF DERATED EOT CRANE AT 04, 05 AND 06 BUILDING AT LC-III OF ITR, CHANDIPUR
2025_MES_702731_2
CE RnD/DLI-34/CHANDI/2024-25
Open Tender
Civil Works
Item Rate
270 days
CHANDIPUR
As per tender documents
8 documents required · 8 mandatory
₹2,000
GE (I) (RnD) Chandipur
₹3.1 L
Yes
2 Sept 2025
13 Jun 2025
12 Jul 2025
13 Jun 2025
5 Jul 2025
21 Jun 2025
Amount
Dismantling of existing EOT cranes 20 Ton and 10 ton capacity (with 2 ton auxiliary with each crane) at 05 bldg. (20T), 04 bldg. (20T) and 06 bldg.(10T) at LC-III ITR Chandipur and deposited to MES store yard complete all as specified and directed.
Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 20 Ton for main hoist and 2 Ton for auxiliary hoist, double girder, with a span 13.5 m, lifting/hook height 8 m, bay length 34.95m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation complete all as specified and directed with and including the followings: - Crane Details:- (i) Duty Class: M5 for Indoor operations. (ii) main hoist Lifting Capacity: 20 Ton. (iii) mini hoist Lifting Capacity: 02 Ton. (iv) Span:13.50 Metre. (v)Hook Height : 8.0 Meter. (vi) LT Wheel Rail Track Size: R-52. (vii) Bay Length: 34.95 Meter. (viii) Clearance between Rail Top to Enclosure Roof: As per design approved. (ix) Hoist: Hoist should be as per IS: 3938 (latest version) of Only Low Head Room Hoist shall be acceptable. (x) Maximum Speed (Meter / Min.):- (a) Hoisting: 3 (b) Cross Travel: 10 (c) Longitudinal Travel: 15.
Item No 2.00 Contd..// (xx) Gears Details: Gear Box should be of fabricated type duly stress relieved. Pinions made of En 24 and gears of En 18. Gears in all the Stages shall be helical in design and to be of machined, lapped and hardened Straight and helical spur gearing shall normally be used for all motions. Worm and bevel gears shall not be used. First and high speed reductions shall be through helical gears. All first reduction pinions and also the other pinions if feasible shall be integral with the shafts. All gears shall be of hardened and tempered alloy or carbon steel with machine cut teeth. Gear tooth shall be cut in metric module system. Surface hardening of teeth is not allowed. The Gears / pinions should be hardened to HRC 50-55 and ground. Please note that gears and pinions must have pressure angle of 20° only. (xxi) Brakes:- Brakes for all the motions shall be Flameproof Electro-magnetic shoe/Flameproof hydraulic thruster brakes according to the application. (xxii) End carriages: End carriages with standard wheel bases fabricated using the modern welding and machining techniques to ensure jerk free and smooth travel motion. The wheels shall be double flanged, supported on self aligning anti-friction bearings, Buffers shall be provided at the ends of the carriage as per IS Standards. (xxiii) Wheels: Tread area of LT & CT Wheels shall be lined with High quality Phosphorus Bronze of suitable thickness to sustain Standard Working Load (SWL). (xxiv) Lubrication: Suitable lubrication system shall be provided for gear box, all rotating parts wherever applicable. Details of the same to be furnished indicating the type & quantity of Lube Oil & grease etc. (xxv) Rope Drum: Shall be of fabricated type stress relieved or seamless pipe. The circumferential weld joints shall be tested by 100% X-Ray quality. (xxvi) Type of Coupling: Couplings should be flexible geared Barrel type. No pin / bush / rubber type coupling to be used. (xxvii) Machining Operation: All mechanical mating surfaces and wheel seating areas are to be machined to the required finish and protected.
Item No 2.00 Contd..// (xxviii) Input Power Supply: Shall be 415 ± 10% Volts, 50 ± 3% Hz, 3 Phase, AC. (xxix) Control Voltage: Shall be 110V AC. (xxx) Protection: All Panels, Limit- Switches and Motors shall have IP 54 protection & shall be flameproof Enclosure. Motor Details: Squirrel Cage Induction Crane, Totally enclosed, fan cooled, Insulation Class-F & confirming to relevant latest IS:325, and IS-123, S4 duty, 150 starts per hour and 40% CDF. Contractor to provide other details like No. of motors, capacity of motor, Frame size, make, type and No. of poles etc. (xxxi) Wiring: All the panel wiring should be done by using standard multi core Copper flexible FRLSH cable. (xxxii) Type & details of Brakes for all motions: Conical rotor type or "Fail to safe" action type flameproof Electromagnetic shoe / flameproof disc brakets type to be provided to hold the mechanism in position instantaneously as soon as the power supply is 'OFF' either accidentally or intentionally for all motions. (xxxiii) Electric Contactors: shall have SIEMENS / L&T / GE contactors suitable for Crane operations. (xxxiv) Contactors Rating:- The rating of all Contactors shall be at least 50% higher than the respective electric motor full load current, at the specified duty cycle. (xxxv) Earthing for Electrical items in Crane: Shall be carried out as per IS. (xxxvi) Trailing Cables/Rubber Cables: Trailing cables/Rubber cables (Extra flexible having copper conductors only) should be travelling on rollers moving on separate IBeam parallel to Bridge Girder and both for LT & CT and from ground panel to panel of crane shall be supplied and Erected by contractor. (xxxvii) Limits Switches: Hoist shall be provided with both Flameproof rotary and Flameproof counter weight type (Over Hoisting and Over lowering) Shunt, adjustable type limit switches. Limit switches shall be provided for both CT & LT. Two way lever type for CT both direction and LT both direction. Supply and Erection of DSL: Suitable capacity DSL to be provided by contractor for CT & LT and it is part of scope of contract.
Item No 2.00 Contd..// (xliv) Environment condition:- The shop floor environment will be dust prone, humid, Corrosive (Due to coastal area)Weather conditions are tropical. Crane shall be kept in the normal shop floor condition without any temperature controlled enclosure / shop. Max. temperature variation is 25 deg Celsius in 24 hours. Sound level should be minimum and the crane should have decent aesthetic look. Ambient Temperature: 4º C - 50º C & relative Humidity: 95%
Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 20 Ton for main hoist and 2 Ton for auxiliary hoist ,double girder, with a span 8.5 m, lifting/hook height 8 m, bay length 19.60m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation, with and including the followings: - (i) Duty Class: M5 for Indoor operations. (ii) main hoist Lifting Capacity: 20 Ton. (iii) mini hoist Lifting Capacity: 02 Ton (iv) Span:8.50 Metre. (v)Hook Height : 8.0 Meter. (vi) LT Wheel Rail Track Size: R-52. (vii) Bay Length: 19.60 Meter. (viii) Clearance between Rail Top to Enclosure Roof: As per design approved. (ix) Hoist: Hoist should be as per IS: 3938 (latest version). Only Low Head Room Hoist shall be acceptable. (x) Maximum Speed (Meter / Min.): (a) Hoisting: 3 (b) Cross Travel: 10 (c) Longitudinal Travel: 15. Rest all as per Srl No 2.01 to 2.05 here-in-before.
Design, supply, installation, testing and commissioning of Flameproof electrically operated, overhead travelling (EOT) cranes of capacity 10 Ton for main hoist and 2 Ton for auxiliary hoist ,double girder, with a span 13.5 m, lifting/hook height 8 m, bay length 35.77m, floor operated conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, on existing steel supporting structures, with Hoisting, Cross Travel (CT) , and Long Travel (LT) with micro drives through VVVF drives with control panel, power and controlling cables, confirming to relevant ISs, controlled by pendent push button station and radio remote control switch of operation, with and including the followings: - (i) Duty Class: M5 for Indoor operations. (ii) main hoist Lifting Capacity: 10 Ton. (iii) mini hoist Lifting Capacity: 02 Ton (iv) Span:13.50 Metre. (v)Hook Height : 8.0 Meter. (vi) LT Wheel Rail Track Size: R-52. (vii) Bay Length: 35.77 Meter (viii) Clearance between Rail Top to Enclosure Roof: As per design approved. (ix) Hoist: Hoist should be as per IS: 3938 (latest version) of Only Low Head Room Hoist shall be acceptable. (x) Maximum Speed (Meter / Min.): (a) Hoisting: 3 (b) Cross Travel: 10 (c) Longitudinal Travel: 15. Rest all as per Srl No 2.01 to 2.05 here-in-before.
M/s. Tojym Steel Products (BID ID -3339657)
deeta-tech enterprises (BID ID -3348115)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .